- 17 2月, 2017 1 次提交
-
-
由 Dave Airlie 提交于
This reverts commit 1592364d. This apparantly causes some regressions so pull it out for now. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 15 2月, 2017 5 次提交
-
-
由 Maarten Lankhorst 提交于
This was somehow lost between v3 and the merged version in Maarten's patch merged as: commit f2d580b9 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Wed May 4 14:38:26 2016 +0200 drm/core: Do not preserve framebuffer on rmfb, v4. This introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, we try to preserve it. Apart from old versions of the vmwgfx xorg driver, there is nothing depending on rmfb disabling a crtc. Since vmwgfx is a legacy driver we can safely only disable the plane with atomic. If this commit is rejected by the driver then we will still fall back to the old behavior and turn off the crtc. v2: - Remove plane->fb assignment, done by drm_atomic_clean_old_fb. - Add WARN_ON when atomic_remove_fb fails. - Always call drm_atomic_state_put. v3: - Use drm_drv_uses_atomic_modeset - Handle the case where the first plane-disable-only commit fails with -EINVAL. Some drivers do not support this, fall back to disabling all crtc's in this case. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/66fc3da5-697b-1613-0a67-a5293209f0dc@linux.intel.com
-
由 Russell King 提交于
Most DRM messages include three pieces of information: the type of the component (CRTC, ENCODER, CONNECTOR etc), the DRM object ID of the component, and the component name. However, there are some messages which omit the last piece of identifying information. This makes it harder to debug failures when these messages are printed, because the DRM object ID doesn't supply enough information to know which piece of hardware had a problem. Update the atomic modeset code to always print the component name along with the type and DRM object ID. Fixes: 4cba6850 ("drm/atomic-helper: Reject legacy flips on a disabled pipe") Fixes: 8d4d0d70 ("drm/atomic-helper: Print an error if vblank wait times out") Fixes: 5481c8fb ("drm/atomic-helper: Check encoder/crtc constraints") Fixes: 99cf4a29 ("drm/atomic: Add current-mode blob to CRTC state") Fixes: cc4ceb48 ("drm: Global atomic state handling") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: NThierry Reding <treding@nvidia.com> [danvet: Wiggle in conflicting hunk.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Maarten Lankhorst 提交于
For consistency and all that, roll them out. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484559464-27107-4-git-send-email-maarten.lankhorst@linux.intel.com
-
由 Maarten Lankhorst 提交于
This kills another dereference of connector->state. connector_mask holds all unchanged connectors at least and any changed connectors are already in state anyway. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484559464-27107-3-git-send-email-maarten.lankhorst@linux.intel.com
-
由 Maarten Lankhorst 提交于
Add for_each_(old)(new)_(plane,connector,crtc)_in_state iterators to replace the old for_each_xxx_in_state ones. This is useful for >1 flip depth and getting rid of all xxx->state dereferences. This requires extra fixups done when committing a state after duplicating, which in general isn't valid but is used by suspend/resume. To handle these, introduce drm_atomic_helper_commit_duplicated_state which performs those fixups before checking & committing the state. Changes since v1: - Remove nonblock parameter for commit_duplicated_state. Changes since v2: - Use commit_duplicated_state for i915 load detection. - Add WARN_ON(old_state != obj->state) before swapping. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484559464-27107-2-git-send-email-maarten.lankhorst@linux.intel.com
-
- 31 1月, 2017 2 次提交
-
-
由 Maarten Lankhorst 提交于
drm_atomic_helper_page_flip and drm_atomic_ioctl set their own events in crtc_state->event. But when it's set the event is freed in 2 places. Solve this by only freeing the event in the atomic ioctl when it allocated its own event. This has been broken twice. The first time when the code was introduced, but only in the corner case when an event is allocated, but more crtc's were included by atomic check and then failing. This can mostly happen when you do an atomic modeset in i915 and the display clock is changed, which forces all crtc's to be included to the state. This has been broken worse by adding in-fences support, which caused the double free to be done unconditionally. [IGT] kms_rotation_crc: starting subtest primary-rotation-180 ============================================================================= BUG kmalloc-128 (Tainted: G U ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] age=0 cpu=3 pid=1529 ___slab_alloc+0x308/0x3b0 __slab_alloc+0xd/0x20 kmem_cache_alloc_trace+0x92/0x1c0 drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] intel_atomic_commit+0x35/0x4f0 [i915] drm_atomic_commit+0x46/0x50 [drm] drm_mode_atomic_ioctl+0x7d4/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Freed in drm_event_cancel_free+0xa3/0xb0 [drm] age=0 cpu=3 pid=1529 __slab_free+0x48/0x2e0 kfree+0x159/0x1a0 drm_event_cancel_free+0xa3/0xb0 [drm] drm_mode_atomic_ioctl+0x86d/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Slab 0xffffde1f0997b080 objects=17 used=2 fp=0xffff92fb65ec2578 flags=0x200000000008101 INFO: Object 0xffff92fb65ec2578 @offset=1400 fp=0xffff92fb65ec2ae8 Redzone ffff92fb65ec2570: bb bb bb bb bb bb bb bb ........ Object ffff92fb65ec2578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ffff92fb65ec25f8: bb bb bb bb bb bb bb bb ........ Padding ffff92fb65ec2738: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 180 Comm: kworker/3:2 Tainted: G BU 4.10.0-rc6-patser+ #5039 Hardware name: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015 Workqueue: events intel_atomic_helper_free_state [i915] Call Trace: dump_stack+0x4d/0x6d print_trailer+0x20c/0x220 free_debug_processing+0x1c6/0x330 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] __slab_free+0x48/0x2e0 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] kfree+0x159/0x1a0 drm_atomic_state_default_clear+0xf7/0x1c0 [drm] ? drm_atomic_state_clear+0x30/0x30 [drm] intel_atomic_state_clear+0xd/0x20 [i915] drm_atomic_state_clear+0x1a/0x30 [drm] __drm_atomic_state_free+0x13/0x60 [drm] intel_atomic_helper_free_state+0x5d/0x70 [i915] process_one_work+0x260/0x4a0 worker_thread+0x2d1/0x4f0 kthread+0x127/0x130 ? process_one_work+0x4a0/0x4a0 ? kthread_stop+0x120/0x120 ret_from_fork+0x29/0x40 FIX kmalloc-128: Object at 0xffff92fb65ec2578 not freed Fixes: 3b24f7d6 ("drm/atomic: Add struct drm_crtc_commit to track async updates") Fixes: 96260142 ("drm/fence: add in-fences support") Cc: <stable@vger.kernel.org> # v4.8+ Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485854725-27640-1-git-send-email-maarten.lankhorst@linux.intel.com
-
由 Dhinakaran Pandiyan 提交于
drm_atomic_set_mode_for_crtc() modifies the .enable member of CRTC state but documentation claims otherwise, fix that. Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485843518-28438-1-git-send-email-dhinakaran.pandiyan@intel.com
-
- 27 1月, 2017 1 次提交
-
-
由 Noralf Trønnes 提交于
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so no need to call drm_debugfs_remove_files(). Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-4-noralf@tronnes.org
-
- 25 1月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Eric. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
-
- 17 1月, 2017 1 次提交
-
-
由 Gustavo Padovan 提交于
Currently if the userspace declares a int variable to store the out_fence fd and pass it to OUT_FENCE_PTR the kernel will overwrite the 32 bits above the int variable on 64 bits systems. Fix this by making the internal storage of out_fence in the kernel a s32 pointer. Reported-by: NChad Versace <chadversary@chromium.org> Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com> Fixes: beaf5af4 ("drm/fence: add out-fences support") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rafael Antognolli <rafael.antognolli@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-and-Tested-by: NChad Versace <chadversary@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484317329-9293-1-git-send-email-gustavo@padovan.org
-
- 05 1月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
I was lazy, rectify that! Also align with drm_atomic_state_get/put for ocd. v2: Git add helps. Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161221130335.5321-1-daniel.vetter@ffwll.ch
-
- 04 1月, 2017 1 次提交
-
-
由 Maarten Lankhorst 提交于
Commit 0853695c ("drm: Add reference counting to drm_atomic_state") adds reference counting to atomic state, but didn't update the comments in drm_atomic_(nonblocking_)commit. Clarify lifetime a bit more. Fixes: 0853695c ("drm: Add reference counting to drm_atomic_state") Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+ Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/7acd1c78-ea86-7776-d98d-c846186e4b88@linux.intel.com
-
- 30 12月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
sed -e 's/\( \* .*\)struct &\([_a-z]*\)/\1\&struct \2/' -i Originally I wasnt a friend of this style because I thought a line-break between the "&struct" and "foo" part would break it. But a quick test shows that " * &struct \n * foo\n" works pefectly well with current kernel-doc. So time to mass-apply these changes! Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1483044517-5770-6-git-send-email-daniel.vetter@ffwll.ch
-
- 18 12月, 2016 1 次提交
-
-
由 Daniel Vetter 提交于
The requirements for connector_list locking are a bit tricky: - We need to be able to jump over zombie conectors (i.e. with refcount == 0, but not yet removed from the list). If instead we require that there's no zombies on the list then the final kref_put must happen under the list protection lock, which means that locking context leaks all over the place. Not pretty - better to deal with zombies and wrap the locking just around the list_del in the destructor. - When we walk the list we must _not_ hold the connector list lock. We walk the connector list at an absolutely massive amounts of places, if all those places can't ever call drm_connector_unreference the code would get unecessarily complicated. - connector_list needs it own lock, again too many places that walk it that we could reuse e.g. mode_config.mutex without resulting in inversions. - Lots of code uses these loops to look-up a connector, i.e. they want to be able to call drm_connector_reference. But on the other hand we want connectors to stay on that list until they're dead (i.e. connector_list can't hold a full reference), which means despite the "can't hold lock for the loop body" rule we need to make sure a connector doesn't suddenly become a zombie. At first Dave&I discussed various horror-show approaches using srcu, but turns out it's fairly easy: - For the loop body we always hold an additional reference to the current connector. That means it can't zombify, and it also means it'll stay on the list, which means we can use it as our iterator to find the next connector. - When we try to find the next connector we only have to jump over zombies. To make sure we don't chase bad pointers that entire loop is protected with the new connect_list_lock spinlock. And because we know that we're starting out with a non-zombie (need to drop our reference for the old connector only after we have our new one), we're guranteed to still be on the connector_list and either find the next non-zombie or complete the iteration. - Only downside is that we need to make sure that the temporary reference for the loop body doesn't leak. iter_get/put() functions + lockdep make sure that's the case. - To avoid a flag day the new iterator macro has an _iter postfix. We can rename it back once all the users of the unsafe version are gone (there's about 100 list walkers for the connector_list). For now this patch only converts all the list walking in the core, leaving helpers and drivers for later patches. The nice thing is that we can now finally remove 2 FIXME comments from the register/unregister functions. v2: - use irqsafe spinlocks, so that we can use this in drm_state_dump too. - nuke drm_modeset_lock_all from drm_connector_init, now entirely cargo-culted nonsense. v3: - do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave). - pretty kerneldoc - add EXPORT_SYMBOL, helpers&drivers are supposed to use this. v4: Change lockdep annotations to only check whether we release the iter fake lock again (i.e. make sure that iter_put is called), but not check any locking dependecies itself. That seams to require a recursive read lock in trylock mode. Cc: Dave Airlie <airlied@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch
-
- 15 12月, 2016 3 次提交
-
-
由 Maarten Lankhorst 提交于
drm_atomic_state_put is called unconditionally, so TEST_ONLY is no different from commit. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-2-git-send-email-maarten.lankhorst@linux.intel.com
-
由 Ville Syrjälä 提交于
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Replace drm_format_num_planes(fb->pixel_format) with just fb->format->num_planes. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - drm_format_num_planes(a->pixel_format) + a->format->num_planes | - drm_format_num_planes(b.pixel_format) + b.format->num_planes ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - drm_format_num_planes(a->fb->pixel_format) + a->fb->format->num_planes | - drm_format_num_planes(b.fb->pixel_format) + b.fb->format->num_planes ) @@ struct drm_framebuffer *a; identifier T; @@ T = a->pixel_format <+... - drm_format_num_planes(T) + a->format->num_planes ...+> @@ struct drm_framebuffer b; identifier T; @@ T = b.pixel_format <+... - drm_format_num_planes(T) + b.format->num_planes ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com
-
- 10 12月, 2016 1 次提交
-
-
由 Boris Brezillon 提交于
Some generic TV connector properties are exposed in drm_mode_config, but they are currently handled independently in each DRM encoder driver. Extend the drm_connector_state to store TV related states, and modify the drm_atomic_connector_{set,get}_property() helpers to fill the connector state accordingly. Each driver is then responsible for checking and applying the new config in its ->atomic_mode_{check,set}() operations. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 07 12月, 2016 1 次提交
-
-
由 Gustavo Padovan 提交于
Instead of dealing with crtc details inside drm_atomic.c we should just export a function that creates a new crtc fence for us and use that. Suggested-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1481046437-18778-1-git-send-email-gustavo@padovan.org
-
- 29 11月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
In a couple of places currently, and with the intent to add more, we update a pointer to a framebuffer to hold a new fb reference (evicting the old). Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161125153231.13255-2-chris@chris-wilson.co.uk
-
- 22 11月, 2016 2 次提交
-
-
由 Gustavo Padovan 提交于
Document IN_FENCE_FD and OUT_FENCE_PTR properties. v2: incorporate comments from Daniel Vetter Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> [danvet: s/async/nonblocking/ atomic commits.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479773488-15048-1-git-send-email-gustavo@padovan.org
-
由 Liviu Dudau 提交于
Cleanup the debugfs entries created by commit 6559c901: drm/atomic: add debugfs file to dump out atomic state when the driver's minor gets un-registered. Without it, DRM drivers compiled as modules cannot be rmmod-ed and modprobed again. Tested-by: NBrian Starkey <brian.starkey@arm.com> Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161117114129.2627-1-Liviu.Dudau@arm.com Fixes: 6559c901 ("drm/atomic: add debugfs file to dump out atomic state")
-
- 17 11月, 2016 1 次提交
-
-
由 Ville Syrjälä 提交于
It has been suggested that having per-plane modifiers is making life more difficult for userspace, so let's just retire modifier[1-3] and use modifier[0] to apply to the entire framebuffer. Obviosuly this means that if individual planes need different tiling layouts and whatnot we will need a new modifier for each combination of planes with different tiling layouts. For a bit of extra backwards compatilbilty the kernel will allow non-zero modifier[1+] but it require that they will match modifier[0]. This in case there's existing userspace out there that sets modifier[1+] to something non-zero with planar formats. Mostly a cocci job, with a bit of manual stuff mixed in. @@ struct drm_framebuffer *fb; expression E; @@ - fb->modifier[E] + fb->modifier @@ struct drm_framebuffer fb; expression E; @@ - fb.modifier[E] + fb.modifier Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net> Cc: dczaplejewicz@collabora.co.uk Suggested-by: NKristian Høgsberg <hoegsberg@gmail.com> Acked-by: NBen Widawsky <ben@bwidawsk.net> Acked-by: NDaniel Stone <daniels@collabora.com> Acked-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479295996-26246-1-git-send-email-ville.syrjala@linux.intel.com
-
- 16 11月, 2016 2 次提交
-
-
由 Gustavo Padovan 提交于
Support DRM out-fences by creating a sync_file with a fence for each CRTC that sets the OUT_FENCE_PTR property. We use the out_fence pointer received in the OUT_FENCE_PTR prop to send the sync_file fd back to userspace. The sync_file and fd are allocated/created before commit, but the fd_install operation only happens after we know that commit succeed. v2: Comment by Rob Clark: - Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here. Comment by Daniel Vetter: - Add clean up code for out_fences v3: Comments by Daniel Vetter: - create DRM_MODE_ATOMIC_EVENT_MASK - userspace should fill out_fences_ptr with the crtc_ids for which it wants fences back. v4: Create OUT_FENCE_PTR properties and remove old approach. v5: Comments by Brian Starkey: - Remove extra fence_get() in atomic_ioctl() - Check ret before iterating on the crtc_state - check ret before fd_install - set fence_state to NULL at the beginning - check fence_state->out_fence_ptr before put_user() - change order of fput() and put_unused_fd() on failure - Add access_ok() check to the out_fence_ptr received - Rebase after fence -> dma_fence rename - Store out_fence_ptr in the drm_atomic_state - Split crtc_setup_out_fence() - return -1 as out_fence with TEST_ONLY flag v6: Comments by Daniel Vetter - Add prepare/unprepare_crtc_signaling() - move struct drm_out_fence_state to drm_atomic.c - mark get_crtc_fence() as static Comments by Brian Starkey - proper set fence_ptr fence_state array - isolate fence_idx increment - improve error handling v7: Comments by Daniel Vetter - remove prefix from internal functions - make out_fence_ptr an s64 pointer - degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail - fix doc issues - filter out OUT_FENCE_PTR == NULL and do not fail in this case - add complete_crtc_signalling() - krealloc fence_state on demand Comment by Brian Starkey - remove unused crtc_state arg from get_out_fence() v8: Comment by Brian Starkey - cancel events before check for !fence_state - convert a few lefovers u64 types for out_fence_ptr - fix memleak by assign fence_state earlier after realloc - proper accout num_fences in case of error v9: Comment by Brian Starkey - memset last position of fence_state after krealloc Comments by Sean Paul - pass install_fds in complete_crtc_signaling() instead of ret - put_user(-1, fence_ptr) when decoding props v10: Comment by Brian Starkey - remove unneeded num_fences increment on error path - kfree fence_state after installing fences fd v11: rebase against latest drm-misc v12: rebase again against latest drm-misc Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10) Reviewed-by: NSean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> (v10) [danvet: Appease checkpatch.] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
-
由 Gustavo Padovan 提交于
There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: NBrian Starkey <brian.starkey@arm.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Tested-by: NRobert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 12 11月, 2016 1 次提交
-
-
由 Eric Engestrom 提交于
The function's behaviour was changed in 90844f00, without changing its signature, causing people to keep using it the old way without realising they were now leaking memory. Rob Clark also noticed it was also allocating GFP_KERNEL memory in atomic contexts, breaking them. Instead of having to allocate GFP_ATOMIC memory and fixing the callers to make them cleanup the memory afterwards, let's change the function's signature by having the caller take care of the memory and passing it to the function. The new parameter is a single-field struct in order to enforce the size of its buffer and help callers to correctly manage their memory. Fixes: 90844f00 ("drm: make drm_get_format_name thread-safe") Cc: Rob Clark <robdclark@gmail.com> Cc: Christian König <christian.koenig@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Acked-by: NRob Clark <robdclark@gmail.com> Acked-by: Sinclair Yeh <syeh@vmware.com> (vmwgfx) Reviewed-by: NJani Nikula <jani.nikula@intel.com> Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NEric Engestrom <eric@engestrom.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161112011309.9799-1-eric@engestrom.ch
-
- 09 11月, 2016 2 次提交
-
-
由 Rob Clark 提交于
Useful to dump current state from debugfs, if turning on the drm.debug bit is too much overhead. The drm_state_dump() can also be used by drivers, for example to implement a module param that dumps state on error irqs. Signed-off-by: NRob Clark <robdclark@gmail.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-6-git-send-email-robdclark@gmail.com
-
由 Rob Clark 提交于
The contents of drm_{plane,crtc,connector}_state is dumped before commit. If a driver extends any of the state structs, it can implement the corresponding funcs->atomic_print_state() to add it's own driver specific state. Signed-off-by: NRob Clark <robdclark@gmail.com> [seanpaul resolved conflict in drm_plane.h] Signed-off-by: NSean Paul <seanpaul@chromium.org>
-
- 08 11月, 2016 1 次提交
-
-
由 Gustavo Padovan 提交于
This new function should be used by drivers when setting a implicit fence for the plane. It abstracts the fact that the user might have chosen explicit fencing instead. Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-1-git-send-email-gustavo@padovan.org
-
- 26 10月, 2016 1 次提交
-
-
由 Felix Monninger 提交于
drm_property_lookup_blob() returns a reference to the returned blob, and drm_atomic_replace_property_blob() takes a references to the blob it stores, so afterwards we are left owning a reference to the new_blob that we never release, and thus leak memory every time we update a property such as during drm_atomic_helper_legacy_gamma_set(). v2: update credentials, drm_property_unreference_blob() is NULL safe and NULL is passed consistently to it throughout drm_atomic.c so do so here. Reported-by: NFelix Monninger <felix.monninger@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98420Signed-off-by: NFelix Monninger <felix.monninger@gmail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Fixes: 5488dc16 ("drm: introduce pipe color correction properties") Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025212808.3908-1-chris@chris-wilson.co.uk
-
- 25 10月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: NSumit Semwal <sumit.semwal@linaro.org> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
-
- 22 10月, 2016 3 次提交
-
-
由 Ville Syrjälä 提交于
Now that all drivers have been converted over to the per-plane rotation property, we can just nuke the global rotation property. v2: Rebase due to BIT(),__builtin_ffs() & co. Deal with superfluous code shuffling Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-4-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
Not all planes on the system may support the same rotations/reflections, so make it possible to create a separate property for each plane. This way userspace gets told exactly which rotations/reflections are possible for each plane. v2: Add drm_plane_create_rotation_property() helper v3: Drop the BIT(), __builtin_ffs(x) - 1, Moar WARNs for bad parameters Deal with superfluous code shuffling Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-4-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
The rotation property should only accept exactly one rotation angle at once. Let's reject attempts to set none or multiple angles. Testcase: igt/kms_rotation_crc/bad-rotation Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-3-git-send-email-ville.syrjala@linux.intel.com
-
- 17 10月, 2016 1 次提交
-
-
由 Chris Wilson 提交于
drm_atomic_state has a complicated single owner model that tracks the single reference from allocation through to destruction on another thread - or perhaps on a local error path. We can simplify this tracking by using reference counting (at a cost of a few more atomics). This is even more beneficial when the lifetime of the state becomes more convoluted than being passed to a single worker thread for the commit. v2: Double check !intel atomic_commit functions for missing gets v3: Update kerneldocs Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: NEric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
-
- 12 9月, 2016 1 次提交
-
-
由 Maarten Lankhorst 提交于
Property lifetimes are equal to the device lifetime, so the separate drm_property_find is not needed. The pointer can be retrieved from the properties member, which saves us some locking and a extra lookup. The lifetime for properties is until the device is destroyed, which happens late in the device unload path. kms_atomic is also testing for invalid properties which returns -ENOENT, to be consistent return -ENOENT for valid properties that don't appear on the object property list. Changes since v1: - Return -ENOENT for invalid properties to make kms_atomic pass. - Change commit message slightly to take this into account. Testcase: kms_atomic Testcase: kms_properties Fixes: 4e9951d9 ("drm/atomic: Reject properties not part of the object.") Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/599c7fa8-b6fd-a42b-c619-a9e4a9c5c244@linux.intel.com
-
- 07 9月, 2016 1 次提交
-
-
由 Maarten Lankhorst 提交于
The legacy setprop ioctl doesn't attempt to set properties that are not enumerated on the object. The atomic ioctl does, fix this by validating first. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473062773-5045-1-git-send-email-maarten.lankhorst@linux.intel.com
-
- 29 8月, 2016 1 次提交
-
-
由 Mario Kleiner 提交于
Due to assigning the 'replaced' value instead of or'ing it, if drm_atomic_crtc_set_property() gets called multiple times, the last call will define the color_mgmt_changed flag, so a non-updating call to a property can reset the flag and prevent actual hw state updates required by preceding property updates. Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: <stable@vger.kernel.org> # v4.6+ Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 8月, 2016 1 次提交
-
-
由 Eric Engestrom 提交于
Signed-off-by: NEric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-