- 13 2月, 2007 40 次提交
-
-
由 Paul Mundt 提交于
There were a few more things that needed fixing up, namely THREAD_SIZE and the TLB miss handler where certain PTRS_PER_PGD == PTRS_PER_PTE assumptions were being made. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
Fixups for external IPR IRQs for the SE770x FPGA. Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
Update se7750_defconfig. Signed-off-by: NNobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Takashi YOSHII 提交于
This fixes up shmin (and SH7706/SH7708) IPR support for some of the recent API changes. Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The iVDR clock enable bit happens to actually reside in a rather different place than what is documented, so fix it up accordingly. This fixes up SATA boot for some of the R7780RP boards that didn't default-enable the clock in the loader. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Jamie Lenehan 提交于
This allows the baud rate for earlyprintk for sh4 without the standard BIOS to be set via the command line. This uses the same format as i386 and x86_64, which is: earlyprintk=serial,ttySC1,38400 The second parameter (ttySC1 above) is usually the console device name or the io address of the serial port. I allow that to be specified but ignore it in order to keep the format the same as i386/x86_64. Signed-off-by: NJamie Lenehan <lenehan@twibble.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 SUGIOKA Toshinobu 提交于
syscall number 300 fails while testing with latest LTP (ltp-full-20061121.tgz) on sh. sys_fstatat64 is called on syscall 300 (see arch/sh/kernel/syscalls.S), and __ARCH_WANT_STAT64 is defined in include/asm-sh/unistd.h, so following patch seems correct. Signed-off-by: NSUGIOKA Toshinobu <sugioka@itonet.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
IPR initialize proceduere update. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
-m2 doesn't end up working particularly well when we've got a constrained toolchain target. Switch to the same semantics used by SH-4A to attempt to get it right. Spotted by Alex Song <songqf9@yahoo.ca>. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This rips out most of the needlessly complicated sh_bios and kgdb trap handling, and forces it all through a common fast dispatch path. As more debug traps are inserted, it's important to keep them in sync for all of the parts, not just SH-3/4. As the SH-2 parts are unable to do traps in the >= 0x40 range, we restrict the debug traps to the 0x30-0x3f range on all parts, and also bump the kgdb breakpoint trap down in to this range (from 0xff to 0x3c) so it's possible to use for nommu. Optionally, this table can be padded out to catch spurious traps for SH-3/4, but we don't do that yet.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Re-export saved_command_line to modules. [SPARC64]: Increase command line size to 2048 like other arches. [SPARC64]: We do not need ZONE_DMA.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [XFRM]: Fix OOPSes in xfrm_audit_log(). [TCP]: cleanup of htcp (resend) [TCP]: Use read mostly for CUBIC parameters. [NETFILTER]: nf_conntrack_tcp: make sysctl variables static [NETFILTER]: ip6t_mh: drop piggyback payload packet on MH packets [NETFILTER]: Fix whitespace errors [NETFILTER]: Kconfig: improve dependency handling [NETFILTER]: xt_mac/xt_CLASSIFY: use IPv6 hook names for IPv6 registration [NETFILTER]: nf_conntrack: change nf_conntrack_l[34]proto_unregister to void [NETFILTER]: nf_conntrack: properly use RCU for nf_conntrack_destroyed callback [NETFILTER]: ip_conntrack: properly use RCU for ip_conntrack_destroyed callback [NETFILTER]: nf_conntrack: fix invalid conntrack statistics RCU assumption [NETFILTER]: ip_conntrack: fix invalid conntrack statistics RCU assumption [NETFILTER]: nf_conntrack: properly use RCU API for nf_ct_protos/nf_ct_l3protos arrays [NETFILTER]: ip_conntrack: properly use RCU API for ip_ct_protos array [NETFILTER]: nf_nat: properly use RCU API for nf_nat_protos array [NETFILTER]: ip_nat: properly use RCU API for ip_nat_protos array [NETFILTER]: nf_log: minor cleanups [NETFILTER]: nf_log: switch logger registration/unregistration to mutex [NETFILTER]: nf_log: make nf_log_unregister_pf return void ...
-
由 David S. Miller 提交于
This reverts some bogosity from the dynamic command-line changes made on sparc32 and sparc64. Drivers such as drivers/sbus/char/openprom.c reference saved_command_line, and can be modular. The boot_command_line is __initdata, yet the dynamic command-line changes add modular exports of that symbol, obviously wrong. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Since we look in both source and object directories for localversion* files, we accidentally ended up getting them twice. Use 'sort -u' to avoid that. Reported-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Make sure that this function is called correctly, and add BUG() checking to ensure the arguments are sane. Based upon a patch by Joy Latten. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Minor non-invasive cleanups: * white space around operators and line wrapping * use const * use __read_mostly Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
These module parameters should be in the read mostly area to avoid cache pollution. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
sysctls are registered by the protocol module itself since 2.6.19, no need to have them visible to others. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
Regarding RFC3775, MH payload proto field should be IPPROTO_NONE. Otherwise it must be discarded (and the receiver should send ICMP error). We assume filter should drop such piggyback everytime to disallow slipping through firewall rules, even the final receiver will discard it. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Instead of depending on internally needed options and letting users figure out what is needed, select them when needed: - IP_NF_IPTABLES, IP_NF_ARPTABLES and IP6_NF_IPTABLES select NETFILTER_XTABLES - NETFILTER_XT_TARGET_CONNMARK, NETFILTER_XT_MATCH_CONNMARK and IP_NF_TARGET_CLUSTERIP select NF_CONNTRACK_MARK - NETFILTER_XT_MATCH_CONNBYTES selects NF_CT_ACCT Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Use NF_IP6_ instead of NF_IP_. The values are identical, this is merely cleanup. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
No caller checks the return value, and since its usually called within the module unload path there's nothing a module could do about errors anyway, so BUG on invalid conditions and return void. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
NF_CT_STAT_INC assumes rcu_read_lock in nf_hook_slow disables preemption as well, making it legal to use __get_cpu_var without disabling preemption manually. The assumption is not correct anymore with preemptable RCU, additionally we need to protect against softirqs when not holding nf_conntrack_lock. Add NF_CT_STAT_INC_ATOMIC macro, which disables local softirqs, and use where necessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
CONNTRACK_STAT_INC assumes rcu_read_lock in nf_hook_slow disables preemption as well, making it legal to use __get_cpu_var without disabling preemption manually. The assumption is not correct anymore with preemptable RCU, additionally we need to protect against softirqs when not holding ip_conntrack_lock. Add CONNTRACK_STAT_INC_ATOMIC macro, which disables local softirqs, and use where necessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in all paths not obviously only used within packet process context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in all paths not obviously only used within packet process context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in paths used outside of packet processing context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in paths used outside of packet processing context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
- rename nf_logging to nf_loggers since its an array of registered loggers - rename nf_log_unregister_logger() to nf_log_unregister() to make it symetrical to nf_log_register() and convert all users Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The spinlock is only used in process context (register/unregister), switch to a mutex. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Since the only user of nf_log_unregister_pf (nfnetlink_log) doesn't check the return value, change it to void and bail out silently when a non-existant address family is supplied. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Also replace synchronize_net() calls by synchronize_rcu() since the RCU protected data is also used for sysfs. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The spinlock is only used in process context (register/unregister) since RCU is used for the nf_hook lists, switch to a mutex. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The spinlock is only used in process context (register/unregister), switch to a mutex. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-