There is a small race in do_swap_page().  When the page swapped-in is
charged, the mapcount can be greater than 0.  But, at the same time some
process (shares it ) call unmap and make mapcount 1->0 and the page is
uncharged.

      CPUA 			CPUB
       mapcount == 1.
   (1) charge if mapcount==0     zap_pte_range()
                                (2) mapcount 1 => 0.
			        (3) uncharge(). (success)
   (4) set page's rmap()
       mapcount 0=>1

Then, this swap page's account is leaked.

For fixing this, I added a new interface.
  - charge
   account to res_counter by PAGE_SIZE and try to free pages if necessary.
  - commit
   register page_cgroup and add to LRU if necessary.
  - cancel
   uncharge PAGE_SIZE because of do_swap_page failure.

     CPUA
  (1) charge (always)
  (2) set page's rmap (mapcount > 0)
  (3) commit charge was necessary or not after set_pte().

This protocol uses PCG_USED bit on page_cgroup for avoiding over accounting.
Usual mem_cgroup_charge_common() does charge -> commit at a time.

And this patch also adds following function to clarify all charges.

  - mem_cgroup_newpage_charge() ....replacement for mem_cgroup_charge()
	called against newly allocated anon pages.

  - mem_cgroup_charge_migrate_fixup()
        called only from remove_migration_ptes().
	we'll have to rewrite this later.(this patch just keeps old behavior)
	This function will be removed by additional patch to make migration
	clearer.

Good for clarifying "what we do"

Then, we have 4 following charge points.
  - newpage
  - swap-in
  - add-to-cache.
  - migration.

[akpm@linux-foundation.org: add missing inline directives to stubs]
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The devcgroup_inode_permission() hook in the devices whitelist cgroup has
always bypassed access checks on fifos.  But the mknod hook did not.  The
devices whitelist is only about block and char devices, and fifos can't
even be added to the whitelist, so fifos can't be created at all except by
tasks which have 'a' in their whitelist (meaning they have access to all
devices).

Fix the behavior by bypassing access checks to mkfifo.
Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Paul Menage <menage@google.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: James Morris <jmorris@namei.org>
Reported-by: NDaniel Lezcano <dlezcano@fr.ibm.com>
Cc: <stable@kernel.org>		[2.6.27.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should use list_for_each_entry_rcu in RCU read site.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix races between /proc/sched_debug by freeing cgroup objects via an RCU
callback.  Thus any cgroup reference obtained from an RCU-safe source will
remain valid during the RCU section.  Since dentries are also RCU-safe,
this allows us to traverse up the tree safely.

Additionally, make cgroup_path() check for a NULL cgrp->dentry to avoid
trying to report a path for a partially-created cgroup.

[lizf@cn.fujitsu.com: call deactive_super() in cgroup_diput()]
Signed-off-by: NPaul Menage <menage@google.com>
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Tested-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Once tasks are populated from system namespace inside cgroup, container
replaces other namespace task with 0 while listing tasks, inside
container.

Though this is expected behaviour from container end, there is no use of
showing unwanted 0s.

In this patch, we check if a process is in same namespace before loading
into pid array.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NGowrishankar M <gowrishankar.m@in.ibm.com>
Acked-by: NPaul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a common function link_css_set() to link a css_set to a cgroup.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Though for an inactive hierarchy, we have subsys->root == &rootnode, but
rootnode's subsys_list is always empty.

This conflicts with the code in find_css_set():

	for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
		...
		if (ss->root->subsys_list.next == &ss->sibling) {
			...
		}
	}
	if (list_empty(&rootnode.subsys_list)) {
		...
	}

The above code assumes rootnode.subsys_list links all inactive
hierarchies.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't link rootnode to the root list, so root_list contains active
hierarchies only as the comment indicates.  And rename for_each_root() to
for_each_active_root().

Also remove redundant check in cgroup_kill_sb().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

cgroup_iter_* do not need rcu_read_lock().

In cgroup_enable_task_cg_lists(), do_each_thread() and while_each_thread()
are protected by RCU, it's OK, for write_lock(&css_set_lock) implies
rcu_read_lock() in non-RT kernel.

If we need explicit rcu_read_lock(), we should add rcu_read_lock() in
cgroup_enable_task_cg_lists(), not cgroup_iter_*.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In cgroup_attach_task(), tsk maybe exit when we call find_css_set().  and
find_css_set() will access to invalid css_set.

This patch increases the count before get_css_set(), and decreases it
after find_css_set().

NOTE:

css_set's refcount is also taskcount, after this patch applied, taskcount
may be off-by-one WHEN cgroup_lock() is not held.  but I reviewed other
code which use taskcount, they are still correct.  No regression found by
reviewing and simply testing.

So I do not use two counters in css_set.  (one counter for taskcount, the
other for refcount.  like struct mm_struct) If this fix cause regression,
we will use two counters in css_set.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use task_lock() protect tsk->cgroups and get_css_set(tsk->cgroups).
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NPaul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't access struct cgroupfs_root in fast path, so we should not put
struct cgroupfs_root protected by RCU

But the comment in struct cgroup_subsys.root confuse us.

struct cgroup_subsys.root is used in these places:

1 find_css_set(): if (ss->root->subsys_list.next == &ss->sibling)
2 rebind_subsystems(): if (ss->root != &rootnode)
                       rcu_assign_pointer(ss->root, root);
                       rcu_assign_pointer(subsys[i]->root, &rootnode);
3 cgroup_has_css_refs(): if (ss->root != cgrp->root)
4 cgroup_init_subsys(): ss->root = &rootnode;
5 proc_cgroupstats_show(): ss->name, ss->root->subsys_bits,
                           ss->root->number_of_cgroups, !ss->disabled);
6 cgroup_clone(): root = subsys->root;
                  if ((root != subsys->root) ||

All these place we have held cgroup_lock() or we don't dereference to
struct cgroupfs_root.  It's means wo don't need RCU when use struct
cgroup_subsys.root, and we should not put struct cgroupfs_root protected
by RCU.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: NPaul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We access res->cgroups without the task_lock(), so res->cgroups may be
changed.  it's unreliable, and "if (l == &res->cgroups->tasks)" may be
false forever.

We don't need add any lock for fixing this bug.  we just access to struct
css_set by struct cg_cgroup_link, not by struct task_struct.

Since we hold css_set_lock, struct cg_cgroup_link is reliable.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: NPaul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When cgroup_post_fork() is called, child is seen by find_task_by_vpid(),
so child->cgroups maybe be changed, It'll incorrect.

child->cgroups<old>'s refcnt is decreased
child->cgroups<new>'s refcnt is increased
but child->cg_list is added to child->cgroups<old>'s list.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: NPaul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s/contoller/controller/
Signed-of-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I happened to find the spinlock in struct ns_cgroup is never used.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- In cgroup_clone(), if vfs_mkdir() returns successfully,
  dentry->d_fsdata will be the pointer to the newly created
  cgroup and won't be NULL.

- a cgroup file's dentry->d_fsdata won't be NULL, guaranteed
  by cgroup_add_file().

- When walking through the subsystems of a cgroup_fs (using
  for_each_subsys), cgrp->subsys[ss->subsys_id] won't be NULL,
  guaranteed by cgroup_create().

(Also remove 2 unused variables in cgroup_rmdir().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- remove 'releasable' since it has been moved to the debug subsys.
- update lock requirements of subsys callbacks.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Making CGROUP related configs be a sub-menu.

This patch make CGROUP related configs be a sub-menu and makes 1st level
configs of "General Setup" shorter.

 including following additional changes
  - add help comment about CGROUPS and GROUP_SCHED.
  - moved MM_OWNER config to the bottom.
    (for good indent in menuconfig)
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_set_dqblk() allowed SETDQBLK quotactl to set user's grace time even if
user was not above his softlimit.  This does not make much sence and by
coincidence causes quota code to omit softlimit warning when user really
exceeds softlimit.  This patch makes do_set_dqblk() reset user's grace
time if he has not exceeded softlimit.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix
fs/coda/sysctl.c:14: warning: 'fs_table_header' defined but not used
fs/coda/sysctl.c:44: warning: 'fs_table' defined but not used

these are only used when CONFIG_SYSCTL is defined.
Signed-off-by: NRichard A. Holden III <aciddeath@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove excess kernel-doc from fs/jbd/transaction.c:

Warning(linux-2.6.28-git5//fs/jbd/transaction.c:764): Excess function parameter 'credits' description in 'journal_get_write_access'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At the moment there are few restrictions on which flags may be set on
which inodes.  Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links.  Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.

Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Acked-by: NAndreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At present INDEX is the only flag that new ext3 inodes do NOT inherit from
their parent.  In addition prevent the flags DIRTY, ECOMPR, IMAGIC and
TOPDIR from being inherited.  List inheritable flags explicitly to prevent
future flags from accidentally being inherited.

This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Acked-by: NAndreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As spotted by kmemtrace, struct ext3_sb_info is 17152 bytes on 64-bit
which makes it a very bad fit for SLAB allocators.  The culprit of the
wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when
NR_CPUS >= 32.

To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2
page in the worst case, separately.  This shinks down struct ext3_sb_info
enough to fit a 1 KB slab cache so now we allocate 16 KB + 1 KB instead of
32 KB saving 15 KB of memory.
Acked-by: NAndreas Dilger <adilger@sun.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a flaw with the way jbd handles fsync batching.  If we fsync() a
file and we were not the last person to run fsync() on this fs then we
automatically sleep for 1 jiffie in order to wait for new writers to join
into the transaction before forcing the commit.  The problem with this is
that with really fast storage (ie a Clariion) the time it takes to commit
a transaction to disk is way faster than 1 jiffie in most cases, so
sleeping means waiting longer with nothing to do than if we just committed
the transaction and kept going.  Ric Wheeler noticed this when using
fs_mark with more than 1 thread, the throughput would plummet as he added
more threads.

This patch attempts to fix this problem by recording the average time in
nanoseconds that it takes to commit a transaction to disk, and what time
we started the transaction.  If we run an fsync() and we have been running
for less time than it takes to commit the transaction to disk, we sleep
for the delta amount of time and then commit to disk.  We acheive
sub-jiffie sleeping using schedule_hrtimeout.  This means that the wait
time is auto-tuned to the speed of the underlying disk, instead of having
this static timeout.  I weighted the average according to somebody's
comments (Andreas Dilger I think) in order to help normalize random
outliers where we take way longer or way less time to commit than the
average.  I also have a min() check in there to make sure we don't sleep
longer than a jiffie in case our storage is super slow, this was requested
by Andrew.

I unfortunately do not have access to a Clariion, so I had to use a
ramdisk to represent a super fast array.  I tested with a SATA drive with
barrier=1 to make sure there was no regression with local disks, I tested
with a 4 way multipathed Apple Xserve RAID array and of course the
ramdisk.  I ran the following command

fs_mark -d /mnt/ext3-test -s 4096 -n 2000 -D 64 -t $i

where $i was 2, 4, 8, 16 and 32.  I mkfs'ed the fs each time.  Here are my
results

type	threads		with patch	without patch
sata	2		24.6		26.3
sata	4		49.2		48.1
sata	8		70.1		67.0
sata	16		104.0		94.1
sata	32		153.6		142.7

xserve	2		246.4		222.0
xserve	4		480.0		440.8
xserve	8		829.5		730.8
xserve	16		1172.7		1026.9
xserve	32		1816.3		1650.5

ramdisk	2		2538.3		1745.6
ramdisk	4		2942.3		661.9
ramdisk	8		2882.5		999.8
ramdisk	16		2738.7		1801.9
ramdisk	32		2541.9		2394.0
Signed-off-by: NJosef Bacik <jbacik@redhat.com>
Cc: Andreas Dilger <adilger@sun.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ric Wheeler <rwheeler@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At the moment there are few restrictions on which flags may be set on
which inodes.  Specifically DIRSYNC may only be set on directories and
IMMUTABLE and APPEND may not be set on links.  Tighten that to disallow
TOPDIR being set on non-directories and only NODUMP and NOATIME to be set
on non-regular file, non-directories.

Introduces a flags masking function which masks flags based on mode and
use it during inode creation and when flags are set via the ioctl to
facilitate future consistency.
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Acked-by: NAndreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At present BTREE/INDEX is the only flag that new ext2 inodes do NOT
inherit from their parent.  In addition prevent the flags DIRTY, ECOMPR,
INDEX, IMAGIC and TOPDIR from being inherited.  List inheritable flags
explicitly to prevent future flags from accidentally being inherited.

This fixes the TOPDIR flag inheritance bug reported at
http://bugzilla.kernel.org/show_bug.cgi?id=9866.
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Acked-by: NAndreas Dilger <adilger@sun.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As spotted by kmemtrace, struct ext2_sb_info is 17024 bytes on 64-bit
which makes it a very bad fit for SLAB allocators.  The culprit of the
wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when
NR_CPUS >= 32.

To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2
page in the worst case, separately.  This shinks down struct ext2_sb_info
enough to fit a 1 KB slab cache so now we allocate 16 KB + 1 KB instead of
32 KB saving 15 KB of memory.
Acked-by: NAndreas Dilger <adilger@sun.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no argument named @chain in ext2_splice_branch, remove references
to it.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove RTC register value checks from the rtc-ds1307 probe() function.
They were left over from the legacy style I2C driver, which had to defend
against finding a non-RTC chip when the driver was probed.

Also fix a minor glitch in the alarm support: DS1307 chips don't have
alarms, so name those methods after one of the chips which actually *do*
have alarms (DS1337).
Signed-off-by: NJüri Reitel <juri.reitel@liewenthal.ee>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Sebastien Barre <sbarre@sdelcc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change i2c access functions to SMBus access functions in order to use the
ds1307 with SMBus adapter.
Signed-off-by: NSebastien Barre <sbarre@sdelcc.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Tested-by: NDavid Brownell <david-b@pacbell.net>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Acked-by: NJean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Tested-by: NSebastien Barre <sbarre@sdelcc.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The xenfs filesystem exports various interfaces to usermode.  Initially
this exports a file to allow usermode to interact with xenbus/xenstore.

Traditionally this appeared in /proc/xen.  Rather than extending procfs,
this patch adds a backward-compat mountpoint on /proc/xen, and provides
a xenfs filesystem which can be mounted there.
Signed-off-by: NAlex Zeffertt <alex.zeffertt@eu.citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

no argument named @xbt in xenbus_switch_state(), remove it.
Signed-off-by: NQinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sync_filesystems() shouldn't be calling async_synchronize_full_special
while holding a spinlock.  The second while loop in that function is the
right place for this anyway.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Reported-by: NGrissiom <chaos.proton@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Work around branch tracer warning.
  sparc64: Fix unsigned long long warnings in drivers.
  sparc64: Use unsigned long long for u64.
  sparc: refactor code in fault_32.c
  sparc64: refactor code in init_64.c
  sparc64: refactor code in viohs.c
  sparc: make proces_ver_nack a bit more readable

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (10191a): Update MAINTAINERS entries on media drivers
  V4L/DVB (10190): cx88: Fix some Kbuild troubles
  V4L/DVB (10189): dm1105: Fix build with INPUT=m and DVB_DM1105=y
  V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etc
  V4L/DVB (10182): tda8290: fix TDA8290 + TDA18271 initialization
  V4L/DVB (10181): v4l2-device: Fix some sparse warnings
  V4L/DVB (10180): drivers/media: Fix a number of sparse warnings
  V4L/DVB (10179): tda8290: Fix two sparse warnings
  V4L/DVB (10178): dvb_frontend: Fix some sparse warnings due to static symbols
  V4L/DVB (10177): Fix sparse warnings on em28xx
  V4L/DVB (10176b): pxa-camera: fix redefinition warnings and missing DMA definitions
  V4L/DVB (10176a): Switch remaining clear_user_page users over to clear_user_highpage

* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux: (67 commits)
  nfsd: get rid of NFSD_VERSION
  nfsd: last_byte_offset
  nfsd: delete wrong file comment from nfsd/nfs4xdr.c
  nfsd: git rid of nfs4_cb_null_ops declaration
  nfsd: dprint each op status in nfsd4_proc_compound
  nfsd: add etoosmall to nfserrno
  NFSD: FIDs need to take precedence over UUIDs
  SUNRPC: The sunrpc server code should not be used by out-of-tree modules
  svc: Clean up deferred requests on transport destruction
  nfsd: fix double-locks of directory mutex
  svc: Move kfree of deferral record to common code
  CRED: Fix NFSD regression
  NLM: Clean up flow of control in make_socks() function
  NLM: Refactor make_socks() function
  nfsd: Ensure nfsv4 calls the underlying filesystem on LOCKT
  SUNRPC: Ensure the server closes sockets in a timely fashion
  NFSD: Add documenting comments for nfsctl interface
  NFSD: Replace open-coded integer with macro
  NFSD: Fix a handful of coding style issues in write_filehandle()
  NFSD: clean up failover sysctl function naming
  ...

As reported by Sam Ravnborg, Gcc-3.4.5 does not handle:

	if (get_user() || get_user())

with the new branch tracer enabled.

Just seperate it out into seperate statements for now
so people can get work done.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates the MAINTAINERS entries for the media drivers.

We are doing a few changes during 2009 to improve patch handling for
drivers/media stuff.

Currently, v4l-dvb-maintainer list at linuxtv.org were used to to be v4l/dvb
driver maintainers ML, in order to keep track of patch merge requests and to
receive bug fixes. This list allows posting for everybody, but, in order to
avoid spam, the user subscribe/unsubscribe at the ML is moderated. Other
development discussions and end-user forums happened on two separated ML (one
for V4L and another for DVB).

At the beginning of 2009, we've created linux-media@vger.kernel.org, meaning to
be the main upstream development mailing list for drivers/media, including V4L
and DVB core and drivers.

The choice for vger.kernel.org were due to the fact that most of upstream lists
are there. Also, its anti-spam filtering rules are better than what we
currently have at linuxtv.org.

For now, both video4linux-list and linux-dvb ML will remain active, but more
focused on end users. It is expected that those lists will gradually be
replaced also by linux-media@vger.kernel.org.

This patch reflect those changes at linux MAINTAINERS file.

Since the development and bug fix discussions will now happen at
linux-media@vger.kernel.org, this patch does the following changes

	- replaces v4l-dvb-maintainer ML for the new
	  linux-media@vger.kernel.org;

	- replaces video4linux ML for the new linux-media@vger.kernel.org;

While here, it also:

	- Fixes the existing -git tree entries for drivers/media (since the
          repository name changed);

	- Adds the missing drivers/media -git tree entry on a few maintainers
          entries that don't point to a tree.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>