Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

'BTRFS_ORDERED_REGULAR' was introduced for the cow case in patch
'Btrfs: specify a new ordered extent type for create_io_em',
but it missed the directIO cow case.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <clm@fb.com>

Never used.
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As 0 refers to an existing type BTRFS_ORDERED_IO_DONE, this specifies a
new type 'REGULAR' for regular IO.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have similar codes to create and insert extent mapping around IO path,
this merges them into a single helper.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The original csum error message only outputs inode number, offset, check
sum and expected check sum.

However no root objectid is outputted, which sometimes makes debugging
quite painful under multi-subvolume case (including relocation).

Also the checksum output is decimal, which seldom makes sense for
users/developers and is hard to read in most time.

This patch will add root objectid, which will be %lld for rootid larger
than LAST_FREE_OBJECTID, and hex csum output for better readability.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

run_delalloc_nocow has used trans in two places where they don't
actually need @trans.

For btrfs_lookup_file_extent, we search for file extents without COWing
anything, and for btrfs_cross_ref_exist, the only place where we need
@trans is deferencing it in order to get running_transaction which we
could easily get from the global fs_info.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit Btrfs: btrfs_page_mkwrite: Reserve space in sectorsized units"
(d0b7da88) did this, but btrfs_lookup_ordered_range expects a 'length'
rather than a 'page_end'.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Dio writes can update i_size in btrfs_get_blocks_direct when it
writes to offset beyond EOF so that endio can update disk_i_size
correctly (because we don't udpate disk_i_size beyond i_size).

However, when truncating down a file, we firstly update i_size
and then wait for in-flight lockless dio reads/writes, according
to the above, i_size may have been changed in dio writes, and
file extents don't get truncated.

For lockless dio writes are always overwrites, i_size is not
supposed to be changed, so this adds a check to filter out this
case.

The race could be reproduced by fstests/generic/299 with patch
"Btrfs: fix btrfs_ordered_update_i_size to update disk_i_size properly"
 applied.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The comment about "page_mkwrite gets called every time the page is
dirtied" in btrfs_page_mkwrite is not correct, it only gets called the
first time the page gets dirtied after the page faults in.

However, we don't need to touch the code because it works well, although
the proper logic is to check if delalloc bits has been set and if so, go
free reserved space, if not, set the delalloc bits for dirty page range.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_ordered_update_i_size can be called by truncate and endio, but
only endio takes ordered_extent which contains the completed IO.

while truncating down a file, if there are some in-flight IOs,
btrfs_ordered_update_i_size in endio will set disk_i_size to
@orig_offset that is zero.  If truncating-down fails somehow, we try to
recover in memory isize with this zero'd disk_i_size.

Fix it by only updating disk_i_size with @orig_offset when
btrfs_ordered_update_i_size is not called from endio while truncating
down and waiting for in-flight IOs completing their work before recover
in-memory size.

Besides fixing the above issue, add an assertion for last_size to double
check we truncate down to the desired size.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This goes as a separate patch because fixing that inside the patches
caused too many many conflicts.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_ino takes a struct inode and this causes a lot of
internal btrfs functions which consume this ino to take a VFS inode,
rather than btrfs' own struct btrfs_inode. In order to fix this "leak"
of VFS structs into the internals of btrfs first it's necessary to
eliminate all uses of struct inode for the purpose of inode. This patch
does that by using BTRFS_I to convert an inode to btrfs_inode. With
this problem eliminated subsequent patches will start eliminating the
passing of struct inode altogether, eventually resulting in a lot cleaner
code.
Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com>
[ fix btrfs_get_extent tracepoint prototype ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The expression is open-coded in several places, this asks for a wrapper.
As we know the MAX_EXTENT fits to u32, we can use the appropirate
division helper. This cascades to the result type updates.

Compiler is clever enough to use shift instead of integer division, so
there's no change in the generated assembly.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

A proposed patch in https://marc.info/?l=linux-btrfs&m=147859791003837
pointed out bad limit threshold in cow_file_range_async, but it turned
out that the whole logic is not necessary and is done by writeback. We
agreed to remove it.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As of now writes smaller than 64k for non compressed extents and 16k
for compressed extents inside eof are considered as candidate
for auto defrag, put them together at a place.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

b335b003 ("Btrfs: Avoid using __GFP_HIGHMEM with slab allocator")
has reduced the allocation mask in btrfs_releasepage to GFP_NOFS just
to prevent from giving an unappropriate gfp mask to the slab allocator
deeper down the callchain (in alloc_extent_state). This is wrong for
two reasons a) GFP_NOFS might be just too restrictive for the calling
context b) it is better to tweak the gfp mask down when it needs that.

So just remove the mask tweaking from btrfs_releasepage and move it
down to alloc_extent_state where it is needed.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>