- 29 6月, 2017 1 次提交
-
-
由 Tobias Klauser 提交于
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d559 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 6月, 2017 1 次提交
-
-
由 Andy Lutomirski 提交于
The kernel has several code paths that read CR3. Most of them assume that CR3 contains the PGD's physical address, whereas some of them awkwardly use PHYSICAL_PAGE_MASK to mask off low bits. Add explicit mask macros for CR3 and convert all of the CR3 readers. This will keep them from breaking when PCID is enabled. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: xen-devel <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/883f8fb121f4616c1c1427ad87350bb2f5ffeca1.1497288170.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 3月, 2017 1 次提交
-
-
由 Kyle Huey 提交于
Intel supports faulting on the CPUID instruction beginning with Ivy Bridge. When enabled, the processor will fault on attempts to execute the CPUID instruction with CPL>0. Exposing this feature to userspace will allow a ptracer to trap and emulate the CPUID instruction. When supported, this feature is controlled by toggling bit 0 of MSR_MISC_FEATURES_ENABLES. It is documented in detail in Section 2.3.2 of https://bugzilla.kernel.org/attachment.cgi?id=243991 Implement a new pair of arch_prctls, available on both x86-32 and x86-64. ARCH_GET_CPUID: Returns the current CPUID state, either 0 if CPUID faulting is enabled (and thus the CPUID instruction is not available) or 1 if CPUID faulting is not enabled. ARCH_SET_CPUID: Set the CPUID state to the second argument. If cpuid_enabled is 0 CPUID faulting will be activated, otherwise it will be deactivated. Returns ENODEV if CPUID faulting is not supported on this system. The state of the CPUID faulting flag is propagated across forks, but reset upon exec. Signed-off-by: NKyle Huey <khuey@kylehuey.com> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: linux-kselftest@vger.kernel.org Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Robert O'Callahan <robert@ocallahan.org> Cc: Richard Weinberger <richard@nod.at> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jeff Dike <jdike@addtoit.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: user-mode-linux-user@lists.sourceforge.net Cc: David Matlack <dmatlack@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: linux-fsdevel@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/20170320081628.18952-9-khuey@kylehuey.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 16 3月, 2017 2 次提交
-
-
由 Thomas Garnier 提交于
This patch makes the GDT remapped pages read-only, to prevent accidental (or intentional) corruption of this key data structure. This change is done only on 64-bit, because 32-bit needs it to be writable for TSS switches. The native_load_tr_desc function was adapted to correctly handle a read-only GDT. The LTR instruction always writes to the GDT TSS entry. This generates a page fault if the GDT is read-only. This change checks if the current GDT is a remap and swap GDTs as needed. This function was tested by booting multiple machines and checking hibernation works properly. KVM SVM and VMX were adapted to use the writeable GDT. On VMX, the per-cpu variable was removed for functions to fetch the original GDT. Instead of reloading the previous GDT, VMX will reload the fixmap GDT as expected. For testing, VMs were started and restored on multiple configurations. Signed-off-by: NThomas Garnier <thgarnie@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Luis R . Rodriguez <mcgrof@kernel.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rafael J . Wysocki <rjw@rjwysocki.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: kasan-dev@googlegroups.com Cc: kernel-hardening@lists.openwall.com Cc: kvm@vger.kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-pm@vger.kernel.org Cc: xen-devel@lists.xenproject.org Cc: zijun_hu <zijun_hu@htc.com> Link: http://lkml.kernel.org/r/20170314170508.100882-3-thgarnie@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Thomas Garnier 提交于
Each processor holds a GDT in its per-cpu structure. The sgdt instruction gives the base address of the current GDT. This address can be used to bypass KASLR memory randomization. With another bug, an attacker could target other per-cpu structures or deduce the base of the main memory section (PAGE_OFFSET). This patch relocates the GDT table for each processor inside the fixmap section. The space is reserved based on number of supported processors. For consistency, the remapping is done by default on 32 and 64-bit. Each processor switches to its remapped GDT at the end of initialization. For hibernation, the main processor returns with the original GDT and switches back to the remapping at completion. This patch was tested on both architectures. Hibernation and KVM were both tested specially for their usage of the GDT. Thanks to Boris Ostrovsky <boris.ostrovsky@oracle.com> for testing and recommending changes for Xen support. Signed-off-by: NThomas Garnier <thgarnie@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Luis R . Rodriguez <mcgrof@kernel.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rafael J . Wysocki <rjw@rjwysocki.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: kasan-dev@googlegroups.com Cc: kernel-hardening@lists.openwall.com Cc: kvm@vger.kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-pm@vger.kernel.org Cc: xen-devel@lists.xenproject.org Cc: zijun_hu <zijun_hu@htc.com> Link: http://lkml.kernel.org/r/20170314170508.100882-2-thgarnie@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 3月, 2017 1 次提交
-
-
由 Dmitry Safonov 提交于
To correctly handle 32-bit and 64-bit mmap() syscalls in 64bit applications its required to have separate address bases to place a mapping. The tasksize can be used as an indicator to select the proper parameters for mmap_base(). This requires the following changes: - Add task_size argument to mmap_base() and make the calculation based on it. - Provide mmap_legacy_base() as a seperate function - Use the new functions in arch_pick_mmap_layout() [ tglx: Massaged changelog ] Signed-off-by: NDmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-3-dsafonov@virtuozzo.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 3月, 2017 2 次提交
-
-
由 Mathias Krause 提交于
Remove the wp_works_ok member of struct cpuinfo_x86. It's an optimization back from Linux v0.99 times where we had no fixup support yet and did the CR0.WP test via special code in the page fault handler. The < 0 test was an optimization to not do the special casing for each NULL ptr access violation but just for the first one doing the WP test. Today it serves no real purpose as the test no longer needs special code in the page fault handler and the only call side -- mem_init() -- calls it just once, anyway. However, Xen pre-initializes it to 1, to skip the test. Doing the test again for Xen should be no issue at all, as even the commit introducing skipping the test (commit d560bc61 ("x86, xen: Suppress WP test on Xen")) mentioned it being ban aid only. And, in fact, testing the patch on Xen showed nothing breaks. The pre-fixup times are long gone and with the removal of the fallback handling code in commit a5c2a893 ("x86, 386 removal: Remove CONFIG_X86_WP_WORKS_OK") the kernel requires a working CR0.WP anyway. So just get rid of the "optimization" and do the test unconditionally. Signed-off-by: NMathias Krause <minipli@googlemail.com> Acked-by: NBorislav Petkov <bp@alien8.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/1486933932-585-3-git-send-email-minipli@googlemail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Mathias Krause 提交于
Those member serve no purpose -- not even fill padding for alignment or such. So just get rid of them. Signed-off-by: NMathias Krause <minipli@googlemail.com> Acked-by: NBorislav Petkov <bp@alien8.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/1486933932-585-2-git-send-email-minipli@googlemail.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 21 2月, 2017 2 次提交
-
-
由 Andy Lutomirski 提交于
Historically, the entire TSS + io bitmap structure was cacheline aligned, but commit ca241c75 ("x86: unify tss_struct") changed it (presumably inadvertently) so that the fixed-layout hardware part is cacheline-aligned and the io bitmap is after the padding. This wastes 24 bytes (the hardware part should be 104 bytes, but this pads it to 128 bytes) and, serves no purpose, and causes sizeof(struct x86_hw_tss) to have a confusing value. Drop the pointless alignment. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andy Lutomirski 提交于
Rather than open-coding the kernel TSS limit in set_tss_desc(), make it a real macro near the TSS layout definition. This is purely a cleanup. Cc: Thomas Garnier <thgarnie@google.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 05 2月, 2017 1 次提交
-
-
由 Borislav Petkov 提交于
Commit: a33d3317 ("x86/CPU/AMD: Fix Bulldozer topology") restored the initial approach we had with the Fam15h topology of enumerating CU (Compute Unit) threads as cores. And this is still correct - they're beefier than HT threads but still have some shared functionality. Our current approach has a problem with the Mad Max Steam game, for example. Yves Dionne reported a certain "choppiness" while playing on v4.9.5. That problem stems most likely from the fact that the CU threads share resources within one CU and when we schedule to a thread of a different compute unit, this incurs latency due to migrating the working set to a different CU through the caches. When the thread siblings mask mirrors that aspect of the CUs and threads, the scheduler pays attention to it and tries to schedule within one CU first. Which takes care of the latency, of course. Reported-by: NYves Dionne <yves.dionne@gmail.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> # 4.9 Cc: Brice Goglin <Brice.Goglin@inria.fr> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yazen Ghannam <yazen.ghannam@amd.com> Link: http://lkml.kernel.org/r/20170205105022.8705-1-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 10 1月, 2017 1 次提交
-
-
由 Borislav Petkov 提交于
... similarly to the cpuid_<reg>() variants. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170109114147.5082-2-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 19 12月, 2016 2 次提交
-
-
由 Andy Lutomirski 提交于
Aside from being excessively slow, CPUID is problematic: Linux runs on a handful of CPUs that don't have CPUID. Use IRET-to-self instead. IRET-to-self works everywhere, so it makes testing easy. For reference, On my laptop, IRET-to-self is ~110ns, CPUID(eax=1, ecx=0) is ~83ns on native and very very slow under KVM, and MOV-to-CR2 is ~42ns. While we're at it: sync_core() serves a very specific purpose. Document it. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel <Xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/5c79f0225f68bc8c40335612bf624511abb78941.1481307769.git.luto@kernel.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andy Lutomirski 提交于
We support various non-Intel CPUs that don't have the CPUID instruction, so the M486 test was wrong. For now, fix it with a big hammer: handle missing CPUID on all 32-bit CPUs. Reported-by: NOne Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Matthew Whitehead <tedheadster@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: xen-devel <Xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/685bd083a7c036f7769510b6846315b17d6ba71f.1481307769.git.luto@kernel.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 12月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
Reorganize the E400 detection now that we have everything in place: switch the CPUs to broadcast mode after the LAPIC has been initialized and remove the facilities that were used previously on the idle path. Unfortunately static_cpu_has_bug() cannpt be used in the E400 idle routine because alternatives have been applied when the actual detection happens, so the static switching does not take effect and the test will stay false. Use boot_cpu_has_bug() instead which is definitely an improvement over the RDMSR and the cpumask handling. Suggested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20161209182912.2726-5-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 11月, 2016 1 次提交
-
-
由 Christian Borntraeger 提交于
No need to duplicate the same define everywhere. Since the only user is stop-machine and the only provider is s390, we can use a default implementation of cpu_relax_yield() in sched.h. Suggested-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Acked-by: NRussell King <rmk+kernel@armlinux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-s390 <linux-s390@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1479298985-191589-1-git-send-email-borntraeger@de.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 16 11月, 2016 4 次提交
-
-
由 He Chen 提交于
Sparse populated CPUID leafs are collected in a software provided leaf to avoid bloat of the x86_capability array, but there is no way to rebuild the real leafs (e.g. for KVM CPUID enumeration) other than rereading the CPUID leaf from the CPU. While this is possible it is problematic as it does not take software disabled features into account. If a feature is disabled on the host it should not be exposed to a guest either. Add get_scattered_cpuid_leaf() which rebuilds the leaf from the scattered cpuid table information and the active CPU features. [ tglx: Rewrote changelog ] Signed-off-by: NHe Chen <he.chen@linux.intel.com> Reviewed-by: NBorislav Petkov <bp@suse.de> Cc: Luwei Kang <luwei.kang@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Piotr Luc <Piotr.Luc@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1478856336-9388-3-git-send-email-he.chen@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 He Chen 提交于
cpuid_regs is defined multiple times as structure and enum. Rename the enum and move all of it to processor.h so we don't end up with more instances. Rename the misnomed register enumeration from CR_* to the obvious CPUID_*. [ tglx: Rewrote changelog ] Signed-off-by: NHe Chen <he.chen@linux.intel.com> Reviewed-by: NBorislav Petkov <bp@alien8.de> Cc: Luwei Kang <luwei.kang@intel.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Piotr Luc <Piotr.Luc@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1478856336-9388-2-git-send-email-he.chen@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Christian Borntraeger 提交于
As there are no users left, we can remove cpu_relax_lowlatency() implementations from every architecture. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Cc: <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/1477386195-32736-6-git-send-email-borntraeger@de.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Christian Borntraeger 提交于
For spinning loops people do often use barrier() or cpu_relax(). For most architectures cpu_relax and barrier are the same, but on some architectures cpu_relax can add some latency. For example on power,sparc64 and arc, cpu_relax can shift the CPU towards other hardware threads in an SMT environment. On s390 cpu_relax does even more, it uses an hypercall to the hypervisor to give up the timeslice. In contrast to the SMT yielding this can result in larger latencies. In some places this latency is unwanted, so another variant "cpu_relax_lowlatency" was introduced. Before this is used in more and more places, lets revert the logic and provide a cpu_relax_yield that can be called in places where yielding is more important than latency. By default this is the same as cpu_relax on all architectures. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1477386195-32736-2-git-send-email-borntraeger@de.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 15 9月, 2016 1 次提交
-
-
由 Andy Lutomirski 提交于
Because sched.h and thread_info.h are a tangled mess, I turned in_compat_syscall() into a macro. If we had current_thread_struct() or similar and we could use it from thread_info.h, then this would be a bit cleaner. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jann Horn <jann@thejh.net> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ccc8a1b2f41f9c264a41f771bb4a6539a642ad72.1473801993.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 24 8月, 2016 2 次提交
-
-
由 Brian Gerst 提交于
thread_saved_pc() was using a completely bogus method to get the return address. Since switch_to() was previously inlined, there was no sane way to know where on the stack the return address was stored. Now with the frame of a sleeping thread well defined, this can be implemented correctly. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1471106302-10159-7-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Brian Gerst 提交于
Move the low-level context switch code to an out-of-line asm stub instead of using complex inline asm. This allows constructing a new stack frame for the child process to make it seamlessly flow to ret_from_fork without an extra test and branch in __switch_to(). It also improves code generation for __schedule() by using the C calling convention instead of clobbering all registers. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1471106302-10159-5-git-send-email-brgerst@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 15 7月, 2016 3 次提交
-
-
由 Andy Lutomirski 提交于
struct thread_info is a legacy mess. To prepare for its partial removal, move thread_info::addr_limit out. As an added benefit, this way is simpler. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/15bee834d09402b47ac86f2feccdf6529f9bc5b0.1468527351.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Rename it to match the thread_struct::uaccess_err pattern and also because it was too long. Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
struct thread_info is a legacy mess. To prepare for its partial removal, move the uaccess control fields out -- they're straightforward. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d0ac4d01c8e4d4d756264604e47445d5acc7900e.1468527351.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 6月, 2016 2 次提交
-
-
由 Fenghua Yu 提交于
x86/fpu/xstate: Rename 'xstate_size' to 'fpu_kernel_xstate_size', to distinguish it from 'fpu_user_xstate_size' User space uses standard format xsave area. fpstate in signal frame should have standard format size. To explicitly distinguish between xstate size in kernel space and the one in user space, we rename 'xstate_size' to 'fpu_kernel_xstate_size'. Cleanup only, no change in functionality. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> [ Rebased the patch and cleaned up the naming. ] Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/2ecbae347a5152d94be52adf7d0f3b7305d90d99.1463760376.git.yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Fenghua Yu 提交于
The kernel xstate area can be in standard or compacted format; it is always in standard format for user mode. When XSAVES is enabled, the kernel uses the compacted format and it is necessary to use a separate fpu_user_xstate_size for signal/ptrace frames. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> [ Rebased the patch and cleaned up the naming. ] Signed-off-by: NYu-cheng Yu <yu-cheng.yu@intel.com> Reviewed-by: NDave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/8756ec34dabddfc727cda5743195eb81e8caf91c.1463760376.git.yu-cheng.yu@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 4月, 2016 1 次提交
-
-
由 Andy Lutomirski 提交于
Unlike ds and es, these are base addresses, not selectors. Rename them so their meaning is more obvious. On x86_32, the field is still called fs. Fixing that could make sense as a future cleanup. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/69a18a51c4cba0ce29a241e570fc618ad721d908.1461698311.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 4月, 2016 2 次提交
-
-
由 Luis R. Rodriguez 提交于
Now that all previous paravirt_enabled() uses were replaced with proper x86 semantics by the previous patches we can remove the unused paravirt_enabled() mechanism. Signed-off-by: NLuis R. Rodriguez <mcgrof@kernel.org> Acked-by: NJuergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-15-git-send-email-mcgrof@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Luis R. Rodriguez 提交于
We have 4 types of x86 platforms that disable RTC: * Intel MID * Lguest - uses paravirt * Xen dom-U - uses paravirt * x86 on legacy systems annotated with an ACPI legacy flag We can consolidate all of these into a platform specific legacy quirk set early in boot through i386_start_kernel() and through x86_64_start_reservations(). This deals with the RTC quirks which we can rely on through the hardware subarch, the ACPI check can be dealt with separately. For Xen things are bit more complex given that the @X86_SUBARCH_XEN x86_hardware_subarch is shared on for Xen which uses the PV path for both domU and dom0. Since the semantics for differentiating between the two are Xen specific we provide a platform helper to help override default legacy features -- x86_platform.set_legacy_features(). Use of this helper is highly discouraged, its only purpose should be to account for the lack of semantics available within your given x86_hardware_subarch. As per 0-day, this bumps the vmlinux size using i386-tinyconfig as follows: TOTAL TEXT init.text x86_early_init_platform_quirks() +70 +62 +62 +43 Only 8 bytes overhead total, as the main increase in size is all removed via __init. Suggested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NLuis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: NJuergen Gross <jgross@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andrew.cooper3@citrix.com Cc: andriy.shevchenko@linux.intel.com Cc: bigeasy@linutronix.de Cc: boris.ostrovsky@oracle.com Cc: david.vrabel@citrix.com Cc: ffainelli@freebox.fr Cc: george.dunlap@citrix.com Cc: glin@suse.com Cc: jlee@suse.com Cc: josh@joshtriplett.org Cc: julien.grall@linaro.org Cc: konrad.wilk@oracle.com Cc: kozerkov@parallels.com Cc: lenb@kernel.org Cc: lguest@lists.ozlabs.org Cc: linux-acpi@vger.kernel.org Cc: lv.zheng@intel.com Cc: matt@codeblueprint.co.uk Cc: mbizon@freebox.fr Cc: rjw@rjwysocki.net Cc: robert.moore@intel.com Cc: rusty@rustcorp.com.au Cc: tiwai@suse.de Cc: toshi.kani@hp.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1460592286-300-5-git-send-email-mcgrof@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 3月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
It is cpu_core_id anyway. Signed-off-by: NBorislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1458917557-8757-3-git-send-email-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 3月, 2016 2 次提交
-
-
由 Andy Lutomirski 提交于
The first instruction of the SYSENTER entry runs on its own tiny stack. That stack can be used if a #DB or NMI is delivered before the SYSENTER prologue switches to a real stack. We have code in place to prevent us from overflowing the tiny stack. For added paranoia, add a canary to the stack and check it in do_debug() -- that way, if something goes wrong with the #DB logic, we'll eventually notice. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/6ff9a806f39098b166dc2c41c1db744df5272f29.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Lutomirski 提交于
The SYSENTER stack is only used on 32-bit kernels. Remove it on 64-bit kernels. ( We may end up using it down the road on 64-bit kernels. If so, we'll re-enable it for CONFIG_IA32_EMULATION. ) Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/9dbd18429f9ff61a76b6eda97a9ea20510b9f6ba.1457578375.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
For per package oriented services we must be able to rely on the number of CPU packages to be within bounds. Create a tracking facility, which - calculates the number of possible packages depending on nr_cpu_ids after boot - makes sure that the package id is within the number of possible packages. If the apic id is outside we map it to a logical package id if there is enough space available. Provide interfaces for drivers to query the mapping and do translations from physcial to logical ids. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Harish Chegondi <harish.chegondi@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20160222221011.541071755@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 05 2月, 2016 1 次提交
-
-
由 Dmitry Vyukov 提交于
thread_saved_pc() reads stack of a potentially running task. This can cause false KASAN stack-out-of-bounds reports, because the running task concurrently poisons and unpoisons own stack. The same happens in get_wchan(), and get get_wchan() was fixed by using READ_ONCE_NOCHECK(). Do the same here. Example KASAN report triggered by sysrq-t: BUG: KASAN: out-of-bounds in sched_show_task+0x306/0x3b0 at addr ffff880043c97c18 Read of size 8 by task syz-executor/23839 [...] page dumped because: kasan: bad access detected [...] Call Trace: [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff813e7a26>] sched_show_task+0x306/0x3b0 [<ffffffff813e7bf4>] show_state_filter+0x124/0x1a0 [<ffffffff82d2ca00>] fn_show_state+0x10/0x20 [<ffffffff82d2cf98>] k_spec+0xa8/0xe0 [<ffffffff82d3354f>] kbd_event+0xb9f/0x4000 [<ffffffff843ca8a7>] input_to_handler+0x3a7/0x4b0 [<ffffffff843d1954>] input_pass_values.part.5+0x554/0x6b0 [<ffffffff843d29bc>] input_handle_event+0x2ac/0x1070 [<ffffffff843d3a47>] input_inject_event+0x237/0x280 [<ffffffff843e8c28>] evdev_write+0x478/0x680 [<ffffffff817ac653>] __vfs_write+0x113/0x480 [<ffffffff817ae0e7>] vfs_write+0x167/0x4a0 [<ffffffff817b13d1>] SyS_write+0x111/0x220 Signed-off-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: glider@google.com Cc: kasan-dev@googlegroups.com Cc: kcc@google.com Cc: linux-kernel@vger.kernel.org Cc: ryabinin.a.a@gmail.com Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 30 1月, 2016 1 次提交
-
-
由 Borislav Petkov 提交于
Move them to a separate header and have the following dependency: x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h This makes it easier to use the header in asm code and not include the whole cpufeature.h and add guards for asm. Suggested-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 20 12月, 2015 1 次提交
-
-
由 David Vrabel 提交于
Adding the rtc platform device in non-privileged Xen PV guests causes an IRQ conflict because these guests do not have legacy PIC and may allocate irqs in the legacy range. In a single VCPU Xen PV guest we should have: /proc/interrupts: CPU0 0: 4934 xen-percpu-virq timer0 1: 0 xen-percpu-ipi spinlock0 2: 0 xen-percpu-ipi resched0 3: 0 xen-percpu-ipi callfunc0 4: 0 xen-percpu-virq debug0 5: 0 xen-percpu-ipi callfuncsingle0 6: 0 xen-percpu-ipi irqwork0 7: 321 xen-dyn-event xenbus 8: 90 xen-dyn-event hvc_console ... But hvc_console cannot get its interrupt because it is already in use by rtc0 and the console does not work. genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0) We can avoid this problem by realizing that unprivileged PV guests (both Xen and lguests) are not supposed to have rtc_cmos device and so adding it is not necessary. Privileged guests (i.e. Xen's dom0) do use it but they should not have irq conflicts since they allocate irqs above legacy range (above gsi_top, in fact). Instead of explicitly testing whether the guest is privileged we can extend pv_info structure to include information about guest's RTC support. Reported-and-tested-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Cc: vkuznets@redhat.com Cc: xen-devel@lists.xenproject.org Cc: konrad.wilk@oracle.com Cc: stable@vger.kernel.org # 4.2+ Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 25 9月, 2015 1 次提交
-
-
由 Denys Vlasenko 提交于
On x86, cpu_relax() simply calls rep_nop(), which generates one instruction, PAUSE (aka REP NOP). With this config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os gcc-4.7.2 does not always inline rep_nop(): it generates several copies of this: <rep_nop> (16 copies, 194 calls): 55 push %rbp 48 89 e5 mov %rsp,%rbp f3 90 pause 5d pop %rbp c3 retq See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 This patch fixes this via s/inline/__always_inline/ on rep_nop() and cpu_relax(). ( Forcing inlining only on rep_nop() causes GCC to deinline cpu_relax(), with almost no change in generated code). text data bss dec hex filename 88118971 19905208 36421632 144445811 89c1173 vmlinux.before 88118139 19905208 36421632 144444979 89c0e33 vmlinux Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443096149-27291-1-git-send-email-dvlasenk@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 08 9月, 2015 1 次提交
-
-
由 Ingo Molnar 提交于
Now that all type definitions are in the UAPI header, include it directly, instead of through <asm/sigcontext.h>. [ We still keep asm/sigcontext.h, so that uapi/asm/sigcontext32.h can include <asm/sigcontext.h>. ] Acked-by: NMikko Rapeli <mikko.rapeli@iki.fi> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1441438363-9999-16-git-send-email-mingo@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-