While creating new RDMA devices based on netdevice name, consider the net
namespace of the caller skb's socket similar to rest of the doit()
callbacks and nldev_dellink() which deletes the RDMA device created using
nldev_newlink().

Fixes: 3856ec4b ("RDMA/core: Add RDMA_NLDEV_CMD_NEWLINK/DELLINK support")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate the correct byte_len on the receiving side when a work
completion is generated with IB_WC_RECV_RDMA_WITH_IMM opcode.

According to the IBA byte_len must indicate the number of written bytes,
whereas it was always equal to zero for the IB_WC_RECV_RDMA_WITH_IMM
opcode, even though data was transferred.

Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: NKonstantin Taranov <konstantin.taranov@inf.ethz.ch>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable RDMA DIM by default for better user experience.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Added parameter in ib_device for enabling dynamic interrupt moderation so
that it can be configured in userspace using rdma tool.

In order to set adaptive-moderation for an ib device the command is:
rdma dev set [DEV] adaptive-moderation [on|off]
Please set on/off.

rdma dev show
0: mlx5_0: node_type ca fw 16.26.0055 node_guid 248a:0703:00a5:29d0
sys_image_guid 248a:0703:00a5:29d0 adaptive-moderation on

rdma resource show cq
dev mlx5_0 cqn 0 cqe 1023 users 4 poll-ctx UNBOUND_WORKQUEUE
adaptive-moderation off comm [ib_core]
Signed-off-by: NYamin Friedman <yaminf@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Added the interface in the infiniband driver that applies the rdma_dim
adaptive moderation. There is now a special function for allocating an
ib_cq that uses rdma_dim.

Performance improvement (ConnectX-5 100GbE, x86) running FIO benchmark over
NVMf between two equal end-hosts with 56 cores across a Mellanox switch
using null_blk device:

READS without DIM:
blk size | BW       | IOPS | 99th percentile latency  | 99.99th latency
512B     | 3.8GiB/s | 7.7M | 1401  usec               | 2442  usec
4k       | 7.0GiB/s | 1.8M | 4817  usec               | 6587  usec
64k      | 10.7GiB/s| 175k | 9896  usec               | 10028 usec

IO WRITES without DIM:
blk size | BW       | IOPS | 99th percentile latency  | 99.99th latency
512B     | 3.6GiB/s | 7.5M | 1434  usec               | 2474  usec
4k       | 6.3GiB/s | 1.6M | 938   usec               | 1221  usec
64k      | 10.7GiB/s| 175k | 8979  usec               | 12780 usec

IO READS with DIM:
blk size | BW       | IOPS | 99th percentile latency  | 99.99th latency
512B     | 4GiB/s   | 8.2M | 816    usec              | 889   usec
4k       | 10.1GiB/s| 2.65M| 3359   usec              | 5080  usec
64k      | 10.7GiB/s| 175k | 9896   usec              | 10028 usec

IO WRITES with DIM:
blk size | BW       | IOPS  | 99th percentile latency | 99.99th latency
512B     | 3.9GiB/s | 8.1M  | 799   usec              | 922   usec
4k       | 9.6GiB/s | 2.5M  | 717   usec              | 1004  usec
64k      | 10.7GiB/s| 176k  | 8586  usec              | 12256 usec

The rdma_dim algorithm was designed to measure the effectiveness of
moderation on the flow in a general way and thus should be appropriate
for all RDMA storage protocols.

rdma_dim is configured to be the default option based on performance
improvement seen after extensive tests.
Signed-off-by: NYamin Friedman <yaminf@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

RDMA DIM implements a different algorithm from net DIM and is based on
completions which is how we can implement interrupt moderation in RDMA.

The algorithm optimizes for number of completions and ratio between
completions and events. In order to avoid long latencies, the
implementation performs fast reduction of moderation level when the
traffic changes.
Signed-off-by: NYamin Friedman <yaminf@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Generic DIM

From: Tal Gilboa and Yamin Fridman

Implement net DIM over a generic DIM library, add RDMA DIM

dim.h lib exposes an implementation of the DIM algorithm for
dynamically-tuned interrupt moderation for networking interfaces.

We want a similar functionality for other protocols, which might need to
optimize interrupts differently. Main motivation here is DIM for NVMf
storage protocol.

Current DIM implementation prioritizes reducing interrupt overhead over
latency. Also, in order to reduce DIM's own overhead, the algorithm might
take some time to identify it needs to change profiles. While this is
acceptable for networking, it might not work well on other scenarios.

Here we propose a new structure to DIM. The idea is to allow a slightly
modified functionality without the risk of breaking Net DIM behavior for
netdev. We verified there are no degradations in current DIM behavior with
the modified solution.

Suggested solution:
- Common logic is implemented in lib/dim/dim.c
- Net DIM (existing) logic is implemented in lib/dim/net_dim.c, which uses
  the common logic in dim.c
- Any new DIM logic will be implemented in "lib/dim/new_dim.c".
  This new implementation will expose modified versions of profiles,
  dim_step() and dim_decision().
- DIM API is declared in include/linux/dim.h for all implementations.

Pros for this solution are:
- Zero impact on existing net_dim implementation and usage
- Relatively more code reuse (compared to two separate solutions)
- Increased extensibility

Required for dependencies in the next series.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.

Only if the FW supports both modes should userspace be told the tag
matching capability is available.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb761894 ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

While this contains some uAPI stuff, it was intended to be read by a
kernel doc. So, let's not move it to a different dir, but, instead, just
add it to the driver-api bookset.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Max Gurtovoy says:

====================
Those two patches introduce VHCA tunnel mechanism to DEVX interface
needed for Bluefield SOC. See extensive commit messages for more
information.
====================

Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies

* branch 'vcha-tunnel':
  IB/mlx5: Implement VHCA tunnel mechanism in DEVX
  net/mlx5: Introduce VHCA tunnel device capability

This mechanism will allow function-A to perform operations "on behalf" of
function-B via tunnel object. Function-A will have privileges for creating
and using this tunnel object.

For example, in the device emulation feature presented in Bluefield-1 SoC,
using device emulation capability, one can present NVMe function to the
host OS.

Since the NVMe function doesn't have a normal command interface to the HCA
HW, here is a need to create a channel that will be able to issue commands
"on behalf" of this function.

This channel is the VHCA_TUNNEL general object. The emulation software
will create this tunnel for every managed function and issue commands via
devx general cmd interface using the appropriate tunnel ID. When devX
context will receive a command with non-zero vhca_tunnel_id, it will pass
the command as-is down to the HCA.

All the validation, security and resource tracking of the commands and the
created tunneled objects is in the responsibility of the HCA FW. When a
VHCA_TUNNEL object destroyed, the device will issue an internal
FLR (function level reset) to the emulated function associated with this
tunnel. This will destroy all the created resources using the tunnel
mechanism.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

rvt was using ib_sge as part of it's ABI, which is not allowed. Introduce
a new struct with the same layout and use it instead.

Fixes: dabac6e4 ("IB/hfi1: Move receive work queue struct into uapi directory")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The initializer for the variable cannot be inside the macro (and zero
initialization isn't needed anyhow).

include/linux/percpu-defs.h:92:33: warning: '__pcpu_unique_use_cnt' initialized and declared 'extern'
  extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name;  \
                                 ^~~~~~~~~~~~~~
include/linux/percpu-defs.h:115:2: note: in expansion of macro 'DEFINE_PER_CPU_SECTION'
  DEFINE_PER_CPU_SECTION(type, name, "")
  ^~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/siw/siw_main.c:129:8: note: in expansion of macro 'DEFINE_PER_CPU'
 static DEFINE_PER_CPU(atomic_t, use_cnt = ATOMIC_INIT(0));
        ^~~~~~~~~~~~~~

Also the rules for PER_CPU require the variable names to be globally
unique, so prefix them with siw_

Fixes: b9be6f18 ("rdma/siw: transmit path")
Fixes: bdcf26bf ("rdma/siw: network and RDMA core interface")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In some cases (not in this particular one) variable self-initialization
can lead to undefined behavior. In this case, it is just obscure code.
Signed-off-by: NMaksym Planeta <mplaneta@os.inf.tu-dresden.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Here Clean up unnecessary initial value for some variable.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When smmu is enable, if execute the perftest command and then use 'kill
-9' to exit, follow this operation repeatedly, the kernel will have a high
probability to print the following smmu event:

  arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the
next reset.

This patch fixed it by removing the action that release qpc memory in the
'hns_roce_qp_free' function.

Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The format specifier \"%p\" can leak kernel addresses.  Use \"%pK\"
instead.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The buffer size of qp which used to allocate qp buffer space for storing
sqwqe and rqwqe will be the length of buffer space. The kernel driver will
use the buffer address and the same size to get the user memory. The same
size named buff_size of qp. According the algorithm of calculating, The
size of the two is not equal when users set the max sge of sq.

Fixes: b28ca7cc ("RDMA/hns: Limit extend sq sge num")
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When using the device emulation feature (introduced in Bluefield-1 SOC),
a privileged function (the device emulation manager) will be able to
create a channel to execute commands on behalf of the emulated function.

This channel will be a general object of type VHCA_TUNNEL that will have
a unique ID for each emulated function. This ID will be passed in each
cmd that will be issued by the emulation SW in a well known offset in
the command header.

This channel is needed since the emulated function doesn't have a normal
command interface to the HCA HW, but some basic configuration for that
function is needed (e.g. initialize and enable the HCA). For that matter,
a specific command-set was defined and only those commands will be issued
by the HCA.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

When hw resetting, there is no response from hw when driver sending cmdq.
If driver still send cmdq to hw, the reset process may be blocked.  So
reset flag should be set to intercept the cmdq command when driver
receiving "notify down" signal.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the depth of cq only supports 64K.  According to the UM, the
depth of cq is up to 4M, Therefore the ba page size of cqe was modified to
support the maximum specification of cq depth.
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Hip06 reserve 12 qps, Hip08 reserve 8 qps. When the QP is released, the
chip model is not judged, and the Hip08 cannot release the qpn 8~12
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

It uses hns_roce_mtr_init in hns_roce_create_qp_common function.  As a
result, it should use hns_roce_mtr_cleanup function for cleaning mtr when
destroying qp.

Fixes: 8d18ad83 ("RDMA/hns: Fix bug when wqe num is larger than 16K")
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds the ability to return the hwstats of per-port default
counters (which can also be queried through sysfs nodes).
Signed-off-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Provide an option to get current counter mode through RDMA netlink.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Provide an option to allow users to manually bind a qp with a counter
through RDMA netlink. Limit it to users with ADMIN capability only.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In manual mode a QP is bound to a counter manually. If counter is not
specified then a new one will be allocated.

Manual mode is enabled when user binds a QP, and disabled when the last
manually bound QP is unbound.

When auto-mode is turned off and there are counters left, manual mode is
enabled so that the user is able to access these counters.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Since a QP can only be bound to one counter, then if it is bound to a
separate counter, for backward compatibility purpose, the statistic value
must be:
* stat of default counter
+ stat of all running allocated counters
+ stat of all deallocated counters (history stats)
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for ib callback counter_alloc_stats() and
counter_update_stats().
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds the ability to return all available counters together with
their properties and hwstats.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Provide an option to enable/disable per-port counter auto mode through
RDMA netlink. Limit it to users with ADMIN capability only.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for ib callbacks counter_bind_qp(), counter_unbind_qp() and
counter_dealloc().
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add counter set id as a parameter so that this API can be used for
querying any q counter.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Support bind a qp with counter. If counter is null then bind the qp to the
default counter. Different QP state has different operation:

- RESET: Set the counter field so that it will take effective during
  RST2INIT change;
- RTS: Issue an RTS2RTS change to update the QP counter;
- Other: Set the counter field and mark the counter_pending flag, when QP
  is moved to RTS state and this flag is set, then issue an RTS2RTS
  modification to update the counter.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Acked-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In auto mode all QPs belong to one category are bind automatically to a
single counter set. Currently only "qp type" is supported.

In this mode the qp counter is set in RST2INIT modification, and when a qp
is destroyed the counter is unbound.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add an API to support set/clear per-port auto mode.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove is_visible_in_pid_ns() from nldev.c and make it as a restrack API,
so that it can be taken advantage by other parts like counter.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add rdma_restrack_attach_task() which is able to attach a task other then
"current" to a resource.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce statistic counter as a new resource. It allows a user to monitor
specific objects (e.g., QPs) by binding to a counter.

In some cases a user counter resource is created with task other then
"current", because its creation is done as part of rdmatool call.
Signed-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies in the next patches.

* mlx5-next:
  net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap
  net/mlx5: Properly name the generic WQE control field
  net/mlx5: Introduce TLS TX offload hardware bits and structures
  net/mlx5: Refactor mlx5_esw_query_functions for modularity
  net/mlx5: E-Switch prepare functions change handler to be modular
  net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()