Some GPIO EINT control registers needs to be preserved across
suspend/resume cycle. This patch extends the driver to take care of
this.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch splits pin bank description into two structures, one
describing bank type (currently only bitfield widths), which can be
shared across multiple banks and second containing bank-specific
parameters including a pointer to a bank type struct.

It is a prerequisite for further patch removing the statically hardcoded
register offsets, making it impossible to support SoCs with different
set and order of pin control registers.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch reworks wake-up interrupt handling in pinctrl-exynos driver,
so each pin bank, which provides wake-up interrupts, has its own IRQ
domain.

Information about whether given pin bank provides wake-up interrupts,
how many and whether they are separate or muxed are parsed from device
tree.

It gives following advantages:
  - interrupts can be specified in device tree in a more readable way,
    e.g. :
    	device {
		/* ... */
		interrupt-parent = <&gpx2>;
		interrupts = <4 0>;
		/* ... */
	};
  - the amount and layout of interrupts is not hardcoded in the code
    anymore, but defined in SoC-specific structure
  - bank and pin of each wake-up interrupt can be easily identified, to
    allow operations, such as setting the pin to EINT function, from
    irq_set_type() callback
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Instead of registering one IRQ domain for all pin banks of a pin
controller, this patch implements registration of per-bank domains.

At a cost of a little memory overhead (~2.5KiB for all GPIO interrupts
of Exynos4x12) it simplifies driver code and device tree sources,
because GPIO interrupts can be now specified per banks.

Example:
	device {
		/* ... */
		interrupt-parent = <&gpa1>;
		interrupts = <3 0>;
		/* ... */
	};
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Some SoCs, like Exynos4x12, have non-sequential layout of EINT control
registers and so current way of calculating register addresses does not
work correctly for them.

This patch adds eint_offset field to samsung_pin_bank struct and
modifies the driver to use it instead of calculating the offsets from
bank index.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Since pin numbers are now assigned dynamically, those are not needed
anymore.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch modifies the pinctrl-samsung driver to assign numbers to pins
dynamically instead of static enumerations.

Thanks to this change the amount of code requried to support a SoC can
be greatly reduced and the code made more readable.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Reviewed-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Pins used as GPIO interrupts need to be configured as EINTs. This patch
adds the required configuration code to exynos_gpio_irq_set_type,
to set the pin as EINT when its interrupt trigger is configured.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add information about the Exynos4210 pin banks and driver data which is
used by the Samsung pinctrl driver. In addition to this, the support for
external gpio and wakeup interrupt support is included and hooked up with
the Samsung pinctrl driver.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>