With a make O=... build kbuild would only create
the include2/asm symlink for archs that not yet
had moved headers to include/$ARCH/include

There is no longer any reason to avoid the symlink
for archs that has moved their headers so create it
unconditionally.

This fixes arm because kbuild checked for include/asm-$ARCH/errno.h
and that file was not present for arm but the platform files
are not yet moved.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk@arm.linux.org.uk>

We used include/asm-$ARCH/system.h to check if
we should create a symlink in include2 directory with
make O=... builds.
But um does not have such a file thus build filed.

Let's try anohter filename:
$ ls -d include/asm-* | wc -l
21
$ ls -d include/asm-*/errno.h | wc -l
21
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>

The majority of this patch was created by the following script:

***
ASM=arch/sparc/include/asm
mkdir -p $ASM
git mv include/asm-sparc64/ftrace.h $ASM
git rm include/asm-sparc64/*
git mv include/asm-sparc/* $ASM
sed -ie 's/asm-sparc64/asm/g' $ASM/*
sed -ie 's/asm-sparc/asm/g' $ASM/*
***

The rest was an update of the top-level Makefile to use sparc
for header files when sparc64 is being build.
And a small fixlet to pick up the correct unistd.h from
sparc64 code.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

This patch conclude the support for

   arch/$ARCH/include

Note: The individual architectures will most likely require
      a few minor patches to support locating header files in
      arch/$ARCH/include

Testing shows that it worked out-of-the-box for sparc.
x86 required a few trivial changes in the arch
specific Makefile and a few include paths had to be adjusted.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Adjust the asm symlink support so we do not create the
symlink unless really needed.
We check the precense of include/asm-$ARCH by checking
for the system.h file. We may end up with a stale directory
so it is not enough to check if the directory is present.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Factor out the headers_*_all support to a seperate
shell script and add support for arch specific
header files can be located in either

    arch/$ARCH/include/asm
or
    include/asm-$ARCH/

In "make help" always display the headers_* targets.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Those are left presumably from aborted ccache(1) compilations:

	arch/x86/kernel/.tmp_io_apic_64.o.T5veul
	arch/x86/kvm/.tmp_x86.o.SZWn69
	arch/x86/mm/.tmp_pgtable.o.sL1LTf
	drivers/ieee1394/.tmp_ieee1394_transactions.o.bUj6o1
	drivers/infiniband/hw/mlx4/.tmp_main.o.vy0ep6

BTW, with git there is nice way to check for such nuisainces:

	make mrproper
	git-ls-files -o

should give empty output.

More precise wildcard spec from: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Jan Engelhardt <jengelh@medozas.de>

Move it to the top-level file to decide if we install/check
the generic headers or the arch specific headers.

This revealed a long standing bug where "make headers_check_all"
relied on the files in asm/ for the current architecture.
So make headers_check_all is now broken by this commit.

In addition:

o add a simpler way to detect if an arch support
  exporting header files.

o add 'set -e;' so we error out early if
  make headers_check_all fails.

o add sparc64 and cris to arch we do not process
  in make headers_*_all because:

    sparc64 - use sparc to export headers
    cris    - is know seriously broken

Includes suggestions from: David Woodhouse
<dwmw2@infradead.org>.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>

Fix the a.out.h case by setting SRCARCH and error
out early in case of an error.
The a.out.h case failed with the *_all targets.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

o Use lower case for local variables
o Add a helper target for common targets
o Use $(hdr-inst)= ... to make Make invocations simpler
o Add -rR to make invocations

In total this adds more lines than it removes but the
benefit is better readability
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>

This means that we no longer need write access to the source tree while
doing 'make modules_install'.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

When a kernel was rebuilt, the previous Module.markers was not cleared.
It caused markers with different format strings to appear as duplicates
when a markers was changed.  This problem is present since
scripts/mod/modpost.c started to generate Module.markers, commit
b2e3e658

It therefore applies to 2.6.25, 2.6.26 and linux-next.

I merely merged the patches from Roland, Wenji and Takashi here.

Credits to
Roland McGrath <roland@redhat.com>
Wenji Huang <wenji.huang@oracle.com>
and
Takashi Nishiie <t-nishiie@np.css.fujitsu.com>

for providing the individual fixes.

- Changelog :
  - Integrated Takashi's Makefile modification to clear Module.markers upon
    make clean.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Roland McGrath <roland@redhat.com>
Cc: Wenji Huang <wenji.huang@oracle.com>
Cc: Takashi Nishiie <t-nishiie@np.css.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile.  This patch
backs out the bad bit.

SHA1 of offending patch: 137e9590)
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: NJohn Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
  I've grown to trust the ppc tree too much ;)   - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Crosscompiling on a Fedora 9 machine running gcc 4.3.0 as its host compiler
and gcc 3.4.6 for the mips-linux target results in the following build
error:

$ make malta_defconfig
$ make
cc1: error: unrecognized command line option "-fno-stack-protector"
scripts/kconfig/conf -s arch/mips/Kconfig
cc1: error: unrecognized command line option "-fno-stack-protector"

The arch Makefile is included too late so the host compiler is feature
tested, not the crosscompiler as intended and thus the Makefile applies
adds -fno-stack-protector to crosscompiler's flags which fails for gcc
3.4.6.  The bug was introduced by e06b8b98
in 2.6.25; 35bb5b1e did add more flags
testing before the arch Makefile inclusion.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Plugs into the generic powerpc clock driver in
arch/powerpc/kernel/clock.c

The following subset of clk_interface is implemented:
    clk_get, clk_put:  get clock via name, release clock
    clk_enable, clk_disable:  enable or disable clock
    clk_get_rate:  get clock rate in Hz
    clk_set_rate:  stubbed
    clk_round_rate:  stubbed
    clk_set_parent: NULL
    clk_get_parent: NULL
Signed-off-by: NJohn Rigby <jrigby@freescale.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

For 'make modules_install', install any firmware required by
the modules which are being installed.

Also add a 'make firmware_install' target which doesn't depend on the
configuration, but installs _all_ available in-kernel-tree firmware into
$(INSTALL_FW_PATH), which defaults to /lib/firmware. This is intended
for distributors to make arch-independent (and config-independent)
packages containing firmware.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This allows arbitrary firmware files to be included in the static kernel
where the firmware loader can find them without requiring userspace to
be alive.

(Updated and CONFIG_EXTRA_FIRMWARE_DIR added with lots of help from
Johannes Berg).
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

.. and a new name, courtesy of Alan.

If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is
set to a non-zero value the ftrace routine will be called everytime
we enter a kernel function that is not marked with the "notrace"
attribute.

The ftrace routine will then call a registered function if a function
happens to be registered.

[ This code has been highly hacked by Steven Rostedt and Ingo Molnar,
  so don't blame Arnaldo for all of this ;-) ]

Update:
  It is now possible to register more than one ftrace function.
  If only one ftrace function is registered, that will be the
  function that ftrace calls directly. If more than one function
  is registered, then ftrace will call a function that will loop
  through the functions to call.
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Since 97965478 ("mm: Get rid of __ZONE_COUNT")
mmzone.h includes bounds.h.
Calling make clean after make prepare removes bounds.h
again so when building external modules this fails.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
--

Alexey Dobriyan <adobriyan@gmail.com> introduced a code adds
menuconfig SOMETHING in Kconfig to tags output when you did "make tags".

See http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=80ff26241623875636674a31c0540a78c0fb5433

"make tags" may work fine with his code. However make TAGS doesn't work well
because etags command requires backslashes to escape meta characters like
`(', `)' and `|'.

Here is a patch.
Signed-off-by: NMasatake YAMATO <yamato@redhat.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

We always linked vmliux.o.
Remove init/built-in.o dependency so we avoid this
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

PowerPC will start moving board defconfigs into subarch-specific
subdirs soon.  "make help" currently does not look in subdirs to
find the defconfigs to show.  This is partially a good thing,
since there are way too many defconfigs for one list.

This patch makes the main "make help" display something like

  help-40x         - Show 40x-specific targets
  help-44x         - Show 44x-specific targets
  help-boards      - Show all of the above

and wires up stuff so those new help-* commands actually work.

[sam: fixed it up to display x86 defconfigs too]
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: trivial@kernel.org
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Add option to enable -Wframe-larger-than= on gcc 4.4

gcc mainline (upcoming 4.4) added a new -Wframe-larger-than=...
option to warn at build time about too large stack frames. Add a config
option to enable this warning, since this very useful for the kernel.

I choose (somewhat arbitarily) 2048 as default warning threshold for 64bit
and 1024 as default for 32bit architectures.  With some research and
fixing all the code for smaller values these defaults should be probably
lowered.

With the default allyesconfigs have some new warnings, but I think
that is all code that should be just fixed.

At some point (when gcc 4.4 is released and widely used) this should
obsolete make checkstack
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Steps to reproduce:

	vi -t NETFILTER
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>