- 28 6月, 2006 11 次提交
-
-
由 Michael Ellerman 提交于
If DEBUG is turned on in prom.c, export the flat device tree via debugfs. This has been handy on several occasions. To look at it: # mount -t debugfs none /sys/kernel/debug # od -a /sys/kernel/debug/powerpc/flat-device-tree and/or # dtc -fI dtb /sys/kernel/debug/powerpc/flat-device-tree -O dts Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
None of this seems to be necessary, so let's see if can remove it and not break anything. Booted on iSeries & pSeries here. NB. we don't remove the hvReleaseData, we just move it down so that the file reads more clearly. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Haren Myneni 提交于
During kdump boot, noticed some machines checkstop on dma protection fault for ongoing DMA left in the first kernel. Instead of initializing TCE entries in iommu_init() for the kdump boot, this patch fixes this issue by walking through the each TCE table and checks whether the entries are in use by the first kernel. If so, reserve those entries by setting the corresponding bit in tbl->it_map such that these entries will not be available for the kdump boot. However it could be possible that all TCE entries might be used up due to the driver bug that does continuous mapping. My observation is around 1700 TCE entries are used on some systems (Ex: P4) at some point of time during kdump boot and saving dump (either write into the disk or sending to remote machine). Hence, this patch will make sure that minimum of 2048 entries will be available such that kdump boot could be successful in some cases. Signed-off-by: NHaren Myneni <haren@us.ibm.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jimi Xenidis 提交于
The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: NJimi Xenidis <jimix@watson.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Johannes Berg 提交于
This patch removes the old pmac ide led blink code and adds generic LED subsystem support for the LED. It maintains backward compatibility with the old BLK_DEV_IDE_PMAC_BLINK Kconfig option which now simply selects the new code and influences the default trigger. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Brownell 提交于
Builds on ARM report link problems with common configurations like statically linked NFS (for nfsroot). The symptom is that __init section code references __exit section code; that won't work since the exit sections are discarded (since they can never be called). The best fix for these particular cases would be an "__init_or_exit" section annotation. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NTrond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
It should be done before calling class_device_unregister() because it will destroy the device and free memory if there are no other references to the device. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 29 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit e5c44fd8. Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem. Daniel says: "[The] reason is a recent change that made modules always shows as module.mod. it breaks modprobe and probably many scripts..besides lsmod looking horrible stuff like this in modprobe.conf: install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia makes modprobe fork/exec endlessly calling itself...until oom interrupts it" Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (56 commits) [PATCH] fs/ocfs2/dlm/: cleanups ocfs2: fix compiler warnings in dlm_convert_lock_handler() ocfs2: dlm_print_one_mle() needs to be defined ocfs2: remove whitespace in dlmunlock.c ocfs2: move dlm work to a private work queue ocfs2: fix incorrect error returns ocfs2: tune down some noisy messages during dlm recovery ocfs2: display message before waiting for recovery to complete ocfs2: mlog in dlm_convert_lock_handler() should be ML_ERROR ocfs2: retry operations when a lock is marked in recovery ocfs2: use cond_resched() in dlm_thread() ocfs2: use GFP_NOFS in some dlm operations ocfs2: wait for recovery when starting lock mastery ocfs2: continue recovery when a dead node is encountered ocfs2: remove unneccesary spin_unlock() in dlm_remaster_locks() ocfs2: dlm_remaster_locks() should never exit without completing ocfs2: special case recovery lock in dlmlock_remote() ocfs2: pending mastery asserts and migrations should block each other ocfs2: temporarily disable automatic lock migration ocfs2: do not unconditionally purge the lockres in dlmlock_remote() ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3657/1: S3C24XX: Documentation update of Overview.txt [ARM] Update mach-types [ARM] 3656/1: S3C2412: Add S3C2412 and S3C2413 documenation [ARM] 3654/1: add ajeco 1arm sbc support [ARM] fix drivers/mfd/ucb1x00-core.c IRQ probing bug [ARM] 3651/1: S3C24XX: Make arch list more detailed [ARM] 3650/1: S3C2412: Update s3c2410_defconfig [ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440 [ARM] 3612/1: make pci bus optional for ixp4xx platform [ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQ [ARM] Remove save_lr/restore_pc macros [ARM] Remove partial non-v6 binutils compatibility [ARM] Remove LOADREGS macro [ARM] Remove RETINSTR macro
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] 8250_pnp: add support for other Wacom tablets
-
由 Ben Dooks 提交于
Patch from Ben Dooks Update the list of supported devices, and remove the changelog. Add SMDK2413 information.-- Signed-off-by: NBen Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Usual mach-types update. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Adrian Bunk 提交于
This patch #if 0's the no longer used dlm_dump_lock_resources(). Since this makes dlmdebug.h empty, this patch also removes this header. Additionally, the needlessly global dlm_is_node_recovered() is made static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
We need to cast to unsigned long long. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Fixes compile breakage. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
The work that is done can block for long periods of time and so is not appropriate for keventd. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Use DLM_REJECTED instead of DLM_RECOVERING. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Before checking for a nonexistent lock, make sure the lockres is not marked RECOVERING. The caller will just retry and the state should be fixed up when recovery completes. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
yield() does not yield. cond_resched() does. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
We cannot restart recovery. Once we begin to recover a node, keep the state of the recovery intact and follow through, regardless of any other node deaths that may occur. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
If the previous master of the recovery lock dies, let calc_usage take it down completely and let the caller completely redo the dlmlock() call. Otherwise, there will never be an opportunity to re-master the lockres and recovery wont be able to progress. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Use the existing structure for blocking migrations when ASTs are pending to achieve the same result. If we can catch the assert before it goes on the wire, just cancel it and let the migration continue. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Now we never change the owner of a lock resource until unmount or node death. This will be re-enabled once some issues in the algorithm used have been resolved. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
In dlmlock_remote(), do not call purge_lockres until the lock resource actually changes. otherwise, the mastery info on the lockres will go away underneath the caller. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
When mastering non-recovery lock resources, additional time was frequently needed to allow the disk heartbeat to catch up with the network timeout. the recovery lock resource is time critical and avoids this path. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Recovery will spin in dlm_pre_master_reco_lockres if we do not ignore timed-out network responses from dead nodes. Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-