This patch causes the network interface to respond to P_Key change
events correctly.  As a result, you'll see a child interface in the
"RUNNING" state (netif_carrier_on()) only when the corresponding P_Key
is configured by the SM.  When SM removes a P_Key, the "RUNNING" state
will be disabled for the corresponding network interface.  To
implement this, I added IB_EVENT_PKEY_CHANGE event handling.  To
prevent flushing the device before the device is open by the "delay
open" mechanism, I added an additional device flag called
IPOIB_FLAG_INITIALIZED.

This also prevents the child network interface from trying to join to
multicast groups until the PKEY is configured.  We used to get error
messages like:

    ib0.f2f2: couldn't attach QP to multicast group ff12:401b:f2f2:0:0:0:ffff:ffff

in this case.  To fix this, I just check IPOIB_FLAG_OPER_UP flag in
ipoib_set_mcast_list().
Signed-off-by: NLeonid Arsh <leonida@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move ipoib_ib_dev_flush() to ipoib's workqueue.  This keeps it ordered
with respect to other work scheduled by the ipoib driver.  This fixes
problems with races, for example:
 - ipoib_ib_dev_flush() has started running because of an IB event
 - user does ifconfig ib0 down
 - ipoib_mcast_stop_thread() gets called twice and waits for the same
   completion twice
Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Cosmetic change: make alignment explicit in to_ipoib_neigh.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix the following race scenario:
  - Device is up.
  - Port event or set mcast list triggers ipoib_mcast_stop_thread,
    this cancels the query and waits on mcast "done" completion.
  - Completion is called and "done" is set.
  - Meanwhile, ipoib_mcast_send arrives and starts a new query,
    re-initializing "done".

Fix this by adding a "multicast started" bit and checking it before
starting a send-only join.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

semaphore to mutex conversion by Ingo and Arjan's script.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
[ Sanity-checked on real IB hardware ]
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Add ibX_path files to debugfs that contain information about the IPoIB
path cache.  IPoIB ARP only gives GIDs, which the IPoIB driver must
resolve to real IB paths through the ib_sa module.  For debugging,
when the ARP table looks OK but traffic isn't flowing, it's useful to
be able to see if the resolution from GID to path worked.

Also clean up the formatting of the existing _mcg debugfs files.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Don't build ipoib_mcast_iter_ functions if CONFIG_INFINIBAND_IPOIB_DEBUG
is not enabled -- their only callers will not be built either.

Also move the prototype for ipoib_open() to ipoib.h to fix a sparse warning.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Change the way IPoIB handles RX packets when it can't allocate a new
receive skbuff.  If the allocation of a new receive skb fails, we now
drop the packet we just received and repost the original receive skb.
This means that the receive ring always stays full and we don't have
to monkey around with trying to schedule a refill task for later.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't
destroy the QP on failure -- that unwinding happens elsewhere, so the
current code can cause a double free.  While we're at it, the
function's name should match what it actually does, so rename it to
ipoib_init_qp().
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

ipoib_mcast_restart_task() is always called from within the
single-threaded IPoIB workqueue, so flushing the workqueue from within
the function can lead to a recursion overflow.  But since we're
running in a single-threaded workqueue, we're already synchronized
against other items in the workqueue, so just get rid of the flush in
ipoib_mcast_restart_task().
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Move the InfiniBand headers from drivers/infiniband/include to include/rdma.
This allows InfiniBand-using code to live elsewhere, and lets us remove the
ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix sparse warnings.  Use __be* where appropriate.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Make some lawyers happy and add copyright notices for people who
forgot to include them when they actually touched the code.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!