- 17 12月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Add an assert for inodes not added to the inode cache in xfs_ireclaim, to make sure we're not going to introduce something like the famous nfsd inode cache bug again. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 15 12月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 12 12月, 2009 2 次提交
-
-
由 Christoph Hellwig 提交于
xfs_iget_cache_miss does not get called with the pag_ici_lock held, so the __releases annotation is incorrect. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Christoph Hellwig 提交于
The iolock is used for protecting reads, writes and block truncates against each other. We have two classes of callers, the first one is induced by a file operation and requires a reference to the inode be held and not dropped after the operation is done: - xfs_vm_vmap, xfs_vn_fallocate, xfs_read, xfs_write, xfs_splice_read, xfs_splice_write and xfs_setattr are all implementations of VFS methods that require a live inode - xfs_getbmap and xfs_swap_extents are ioctl subcommand for which the same is true - xfs_truncate_file is only called on quota inodes just returned from xfs_iget - xfs_sync_inode_data does the lock just after an igrab() - xfs_filestream_associate and xfs_filestream_new_ag take the iolock on the parent inode of an inode which by VFS rules must be referenced And we have various calls to truncate blocks past EOF or the whole file when dropping the last reference to an inode. Unfortunately lockdep complains when we do memory allocations that can recurse into the filesystem in the first class because the second class happens to take the same lock. To avoid this re-init the iolock in the beginning of xfs_fs_clear_inode to get a new lock class. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 02 9月, 2009 2 次提交
-
-
由 Christoph Hellwig 提交于
xfs_trans_iget is a wrapper for xfs_iget that adds the inode to the transaction after it is read. Except when the inode already is in the inode cache, in which case it returns the existing locked inode with increment lock recursion counts. Now, no one in the tree every decrements these lock recursion counts, so any user of this gets a potential double unlock when both the original owner of the inode and the xfs_trans_iget caller unlock it. When looking back in a git bisect in the historic XFS tree there was only one place that decremented these counts, xfs_trans_iput. Introduced in commit ca25df7a840f426eb566d52667b6950b92bb84b5 by Adam Sweeney in 1993, and removed in commit 19f899a3ab155ff6a49c0c79b06f2f61059afaf3 by Steve Lord in 2003. And as long as it didn't slip through git bisects cracks never actually used in that time frame. A quick audit of the callers of xfs_trans_iget shows that no caller really relies on this behaviour fortunately - xfs_ialloc allows this inode from disk so it must not be there before, and all the RT allocator routines only every add each RT bitmap inode once. In addition to removing lots of code and reducing the size of the inode item this patch also avoids the double inode cache lookup in each create/mkdir/mknod transaction. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
由 Christoph Hellwig 提交于
The guarantees for O_SYNC are exactly the same as the ones we need to make for an fsync call (and given that Linux O_SYNC is O_DSYNC the equivalent is fdadatasync, but we treat both the same in XFS), except with a range data writeout. Jan Kara has started unifying these two path for filesystems using the generic helpers, and I've started to look at XFS. The actual transaction commited by xfs_fsync and xfs_write_sync_logforce has a different transaction number, but actually is exactly the same. We'll only use the fsync transaction going forward. One major difference is that xfs_write_sync_logforce never issues a cache flush unless we commit a transaction causing that as a side-effect, which is an obvious bug in the O_SYNC handling. Second all the locking and i_update_size vs i_update_core changes from 978b7237 never made it to xfs_write_sync_logforce, so we add them back. To make xfs_fsync easily usable from the O_SYNC path, the filemap_fdatawait call is moved up to xfs_file_fsync, so that we don't wait on the whole file after we already waited for our portion in xfs_write. We'll also use a plain call to filemap_write_and_wait_range instead of the previous sync_page_rang which did it in two steps including an half-hearted inode write out that doesn't help us. Once we're done with this also remove the now useless i_update_size tracking. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 18 8月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
The locking in xfs_iget_cache_hit currently has numerous problems: - we clear the reclaim tag without i_flags_lock which protects modifications to it - we call inode_init_always which can sleep with pag_ici_lock held (this is oss.sgi.com BZ #819) - we acquire and drop i_flags_lock a lot and thus provide no consistency between the various flags we set/clear under it This patch fixes all that with a major revamp of the locking in the function. The new version acquires i_flags_lock early and only drops it once we need to call into inode_init_always or before calling xfs_ilock. This patch fixes a bug seen in the wild where we race modifying the reclaim tag. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 17 8月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
The locking in xfs_iget_cache_hit currently has numerous problems: - we clear the reclaim tag without i_flags_lock which protects modifications to it - we call inode_init_always which can sleep with pag_ici_lock held (this is oss.sgi.com BZ #819) - we acquire and drop i_flags_lock a lot and thus provide no consistency between the various flags we set/clear under it This patch fixes all that with a major revamp of the locking in the function. The new version acquires i_flags_lock early and only drops it once we need to call into inode_init_always or before calling xfs_ilock. This patch fixes a bug seen in the wild where we race modifying the reclaim tag. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 08 8月, 2009 2 次提交
-
-
由 Christoph Hellwig 提交于
When freeing an inode that lost race getting added to the inode cache we must not call into ->destroy_inode, because that would delete the inode that won the race from the inode cache radix tree. This patch uses splits a new xfs_inode_free helper out of xfs_ireclaim and uses that plus __destroy_inode to make sure we really only free the memory allocted for the inode that lost the race, and not mess with the inode cache state. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reported-by: NAlex Samad <alex@samad.com.au> Reported-by: NAndrew Randrianasulu <randrik@mail.ru> Reported-by: NStephane <sharnois@max-t.com> Reported-by: NTommy <tommy@news-service.com> Reported-by: NMiah Gregory <mace@darksilence.net> Reported-by: NGabriel Barazer <gabriel@oxeva.fr> Reported-by: NLeandro Lucarella <llucax@gmail.com> Reported-by: NDaniel Burr <dburr@fami.com.au> Reported-by: NNickolay <newmail@spaces.ru> Reported-by: NMichael Guntsche <mike@it-loops.com> Reported-by: NDan Carley <dan.carley+linuxkern-bugs@gmail.com> Reported-by: NMichael Ole Olsen <gnu@gmx.net> Reported-by: NMichael Weissenbacher <mw@dermichi.com> Reported-by: NMartin Spott <Martin.Spott@mgras.net> Reported-by: NChristian Kujau <lists@nerdbynature.de> Tested-by: NMichael Guntsche <mike@it-loops.com> Tested-by: NDan Carley <dan.carley+linuxkern-bugs@gmail.com> Tested-by: NChristian Kujau <lists@nerdbynature.de>
-
由 Christoph Hellwig 提交于
Currently inode_init_always calls into ->destroy_inode if the additional initialization fails. That's not only counter-intuitive because inode_init_always did not allocate the inode structure, but in case of XFS it's actively harmful as ->destroy_inode might delete the inode from a radix-tree that has never been added. This in turn might end up deleting the inode for the same inum that has been instanciated by another process and cause lots of cause subtile problems. Also in the case of re-initializing a reclaimable inode in XFS it would free an inode we still want to keep alive. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 24 6月, 2009 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 10 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
This patch rips out the XFS ACL handling code and uses the generic fs/posix_acl.c code instead. The ondisk format is of course left unchanged. This also introduces the same ACL caching all other Linux filesystems do by adding pointers to the acl and default acl in struct xfs_inode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 08 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 07 4月, 2009 1 次提交
-
-
由 Dave Chinner 提交于
If we fail to initialise the VFS inode in inode_init_always(), it will call ->delete_inode internally resulting in the inode being freed. Hence we need to delay the call to inode_init_always() until after the XFS inode is sufficient set up to handle a call to ->delete_inode, and then if that fails do not touch the inode again at all as it has been freed. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 07 3月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
The inode can't be locked by anyone else as we just created it a few lines above and it's not been added to any lookup data structure yet. So use a trylock that must succeed to get around the lockdep warnings. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NAlexander Beregalov <a.beregalov@gmail.com> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 04 3月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
The inode can't be locked by anyone else as we just created it a few lines above and it's not been added to any lookup data structure yet. So use a trylock that must succeed to get around the lockdep warnings. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NAlexander Beregalov <a.beregalov@gmail.com> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NFelix Blyakher <felixb@sgi.com>
-
- 04 12月, 2008 3 次提交
-
-
由 Christoph Hellwig 提交于
Move the inode tracing into xfs_iget.c / xfs_inode.h and kill xfs_vnode.c now that it's empty. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
由 Christoph Hellwig 提交于
There are a few inode flags around that aren't used anywhere, so remove them. Also update xfsidbg to display all used inode flags correctly. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
由 Christoph Hellwig 提交于
Merge xfs_iextract and xfs_idestroy into xfs_ireclaim as they are never called individually. Also rewrite most comments in this area as they were severly out of date. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
- 01 12月, 2008 2 次提交
-
-
由 Christoph Hellwig 提交于
Allocate the inode in xfs_iget_cache_miss and pass it into xfs_iread. This simplifies the error handling and allows xfs_iread to be shared with userspace which already uses these semantics. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
由 Christoph Hellwig 提交于
Just pass down the XFS_IGET_* flags all the way down to xfs_imap instead of translating them mid-way. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com>
-
- 30 10月, 2008 12 次提交
-
-
由 David Chinner 提交于
If we get a race looking up a reclaimable inode, we can end up with the winner proceeding to use the inode before it has been completely re-initialised. This is a Bad Thing. Fix the race by checking whether we are still initialising the inod eonce we have a reference to it, and if so wait for the initialisation to complete before continuing. While there, fix a leaked reference count in the same code when encountering an unlinked inode and we are not doing a lookup for a create operation. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32429a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
To make sure we free the security data inodes need to be freed using the proper VFS helper (which we also need to export for this). We mark these inodes bad so we can skip the flush path for them. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32398a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NDavid Chinner <david@fromorbit.com>
-
由 David Chinner 提交于
When we are inside a radix tree preload region, we cannot sleep. Recently we moved the inode locking inside the preload region for the inode radix tree. Fix that, and fix a missed unlock in another error path in the same code at the same time. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32385a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
Change all the remaining AIL API functions that are passed struct xfs_mount pointers to pass pointers directly to the struct xfs_ail being used. With this conversion, all external access to the AIL is via the struct xfs_ail. Hence the operation and referencing of the AIL is almost entirely independent of the xfs_mount that is using it - it is now much more tightly tied to the log and the items it is tracking in the log than it is tied to the xfs_mount. SGI-PV: 988143 SGI-Modid: xfs-linux-melb:xfs-kern:32353a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
Now that the deleted inodes list is unused, kill it. This also removes the i_reclaim list head from the xfs_inode, shrinking it by two pointers. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32334a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
Prepare for removing the deleted inode list by marking inodes for reclaim in the inode radix trees so that we can use the radix trees to find reclaimable inodes. SGI-PV: 988142 SGI-Modid: xfs-linux-melb:xfs-kern:32331a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
To avoid issues with different lifecycles of XFS and Linux inodes, embedd the linux inode inside the XFS inode. This means that the linux inode has the same lifecycle as the XFS inode, even when it has been released by the OS. XFS inodes don't live much longer than this (a short stint in reclaim at most), so there isn't significant memory usage penalties here. Version 3 o kill xfs_icount() Version 2 o remove unused commented out code from xfs_iget(). o kill useless cast in VFS_I() SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32323a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
There are really two cases in xfs_iget_core(). The first is the cache hit case, the second is the miss case. They share very little code, and hence can easily be factored out into separate functions. This makes the code much easier to understand and subsequently modify. SGI-PV: 988141 SGI-Modid: xfs-linux-melb:xfs-kern:32317a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
There are no more callers to xfs_sync() now, so remove the function altogther. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32311a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
Now we've removed all users of the mount inode list, we can kill it. This reduces the size of the xfs_inode by 2 pointers. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32293a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 Lachlan McIlroy 提交于
Lock debugging reported the ilock was being destroyed without being unlocked. We don't need to lock the inode until we are going to insert it into the radix tree. SGI-PV: 987246 SGI-Modid: xfs-linux-melb:xfs-kern:32159a Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
To avoid having to initialise some fields of the XFS inode on every allocation, we can use the slab init-once feature to initialise them. All we have to guarantee is that when we free the inode, all it's entries are in the initial state. Add asserts where possible to ensure debug kernels check this initial state before freeing and after allocation. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31925a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
- 13 8月, 2008 3 次提交
-
-
由 David Chinner 提交于
Use the new completion flush code to implement the inode flush lock. Removes one of the final users of semaphores in the XFS code base. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31817a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Christoph Hellwig 提交于
Sanitize setting up the Linux indode. Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now because that's the only place it needs to be done, xfs_initialize_vnode is renamed to xfs_setup_inode and loses all superflous paramaters. The check for I_NEW is removed because it always is true and the di_mode check moves into xfs_iget_core because it's only needed there. xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode and the whole things is moved into xfs_iops.c where it belongs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31782a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
In several places we directly convert from the XFS inode to the linux (VFS) inode by a simple deference of ip->i_vnode. We should not do this - a helper function should be used to extract the VFS inode from the XFS inode. Introduce the function VFS_I() to extract the VFS inode from the XFS inode. The name was chosen to match XFS_I() which is used to extract the XFS inode from the VFS inode. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31720a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 29 4月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
The writer field is not needed for non_DEBU builds so remove it. While we're at i also clean up the interface for is locked asserts to go through and xfs_iget.c helper with an interface like the xfs_ilock routines to isolated the XFS codebase from mrlock internals. That way we can kill mrlock_t entirely once rw_semaphores grow an islocked facility. Also remove unused flags to the ilock family of functions. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30902a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 18 4月, 2008 1 次提交
-
-
由 David Chinner 提交于
Remove the xfs_icluster structure and replace with a radix tree lookup. We don't need to keep a list of inodes in each cluster around anymore as we can look them up quickly when we need to. The only time we need to do this now is during inode writeback. Factor the inode cluster writeback code out of xfs_iflush and convert it to use radix_tree_gang_lookup() instead of walking a list of inodes built when we first read in the inodes. This remove 3 pointers from each xfs_inode structure and the xfs_icluster structure per inode cluster. Hence we reduce the cache footprint of the xfs_inodes by between 5-10% depending on cluster sparseness. To be truly efficient we need a radix_tree_gang_lookup_range() call to stop searching once we are past the end of the cluster instead of trying to find a full cluster's worth of inodes. Before (ia64): $ cat /sys/slab/xfs_inode/object_size 536 After: $ cat /sys/slab/xfs_inode/object_size 512 SGI-PV: 977460 SGI-Modid: xfs-linux-melb:xfs-kern:30502a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 06 3月, 2008 1 次提交
-
-
由 David Chinner 提交于
If the radix_tree_preload() fails, we need to destroy the inode we just read in before trying again. This could leak xfs_vnode structures when there is memory pressure. Noticed by Christoph Hellwig. SGI-PV: 977823 SGI-Modid: xfs-linux-melb:xfs-kern:30606a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
- 07 2月, 2008 1 次提交
-
-
由 David Chinner 提交于
The log force added in xfs_iget_core() has been a performance issue since it was introduced for tight loops that allocate then unlink a single file. under heavy writeback, this can introduce unnecessary latency due tothe log I/o getting stuck behind bulk data writes. Fix this latency problem by avoinding the need for the log force by moving the place we mark linux inode dirty to the transaction commit rather than on transaction completion. This also closes a potential hole in the sync code where a linux inode is not dirty between the time it is modified and the time the log buffer has been written to disk. SGI-PV: 972753 SGI-Modid: xfs-linux-melb:xfs-kern:30007a Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-