- 12 2月, 2011 1 次提交
-
-
由 Bruce Allan 提交于
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 2月, 2011 3 次提交
-
-
由 David S. Miller 提交于
If we didn't have a routing cache, we would not be able to properly propagate certain kinds of dynamic path attributes, for example PMTU information and redirects. The reason is that if we didn't have a routing cache, then there would be no way to lookup all of the active cached routes hanging off of sockets, tunnels, IPSEC bundles, etc. Consider the case where we created a cached route, but no inetpeer entry existed and also we were not asked to pre-COW the route metrics and therefore did not force the creation a new inetpeer entry. If we later get a PMTU message, or a redirect, and store this information in a new inetpeer entry, there is no way to teach that cached route about the newly existing inetpeer entry. The facilities implemented here handle this problem. First we create a generation ID. When we create a cached route of any kind, we remember the generation ID at the time of attachment. Any time we force-create an inetpeer entry in response to new path information, we bump that generation ID. The dst_ops->check() callback is where the knowledge of this event is propagated. If the global generation ID does not equal the one stored in the cached route, and the cached route has not attached to an inetpeer yet, we look it up and attach if one is found. Now that we've updated the cached route's information, we update the route's generation ID too. This clears the way for implementing PMTU and redirects directly in the inetpeer cache. There is absolutely no need to consult cached route information in order to maintain this information. At this point nothing bumps the inetpeer genids, that comes in the later changes which handle PMTUs and redirects using inetpeers. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Validity of the cached PMTU information is indicated by it's expiration value being non-zero, just as per dst->expires. The scheme we will use is that we will remember the pre-ICMP value held in the metrics or route entry, and then at expiration time we will restore that value. In this way PMTU expiration does not kill off the cached route as is done currently. Redirect information is permanent, or at least until another redirect is received. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Future changes will add caching information, and some of these new elements will be addresses. Since the family is implicit via the ->daddr.family member, replicating the family in ever address we store is entirely redundant. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2011 2 次提交
-
-
由 Xiaotian Feng 提交于
commit a512b92b adds sysfs entry for net device group, but before this commit, tun also uses group sysfs, so after this commit checkin, kernel warns like this: sysfs: cannot create duplicate filename '/devices/virtual/net/vnet0/group' Since tun has used this for years, rename sysfs under tun might break existing userspace, so rename group sysfs entry for net device group is a better choice. Signed-off-by: NXiaotian Feng <dfeng@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2011 14 次提交
-
-
由 David S. Miller 提交于
Conflicts: drivers/net/e1000e/netdev.c
-
由 Tomoya 提交于
Currently, in case reload pch_can, pch_can not to be able to catch interrupt. The cause is bus-master is not set in pch_can. Thus, add enabling bus-master processing. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tomoya 提交于
Currently, when rmmod pch_can, kernel failure occurs. The cause is pci_iounmap executed before pch_can_reset. Thus pci_iounmap moves after pch_can_reset. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tomoya 提交于
Currently, 800k comms fails since prop_seg set zero. (EG20T PCH CAN register of prop_seg must be set more than 1) To prevent prop_seg set to zero, change tseg2_min 1 to 2. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nobody actually does anything in response to the event, so just kill it off. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
I simply missed this one when modifying the other dst metric interfaces earlier. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
In commit aa942104 ("net: init ingress queue") we moved the allocation and lock initialization of the queues into alloc_netdev_mq() since register_netdevice() is way too late. The problem is that dev->type is not setup until the setup() callback is invoked by alloc_netdev_mq(), and the dev->type is what determines the lockdep class to use for the locks in the queues. Fix this by doing the queue allocation after the setup() callback runs. This is safe because the setup() callback is not allowed to make any state changes that need to be undone on error (memory allocations, etc.). It may, however, make state changes that are undone by free_netdev() (such as netif_napi_add(), which is done by the ipoib driver's setup routine). The previous code also leaked a reference to the &init_net namespace object on RX/TX queue allocation failures. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
rtnl_link_ops->setup(), and the "setup" callback passed to alloc_netdev*(), cannot make state changes which need to be undone on failure. There is no cleanup mechanism available at this point. So we have to add the caif private instance to the global list once we are sure that register_netdev() has succedded in ->newlink(). Otherwise, if register_netdev() fails, the caller will invoke free_netdev() and we will have a reference to freed up memory on the chnl_net_list. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
The Linux IPv4 AH stack aligns the AH header on a 64 bit boundary (like in IPv6). This is not RFC compliant (see RFC4302, Section 3.3.3.2.1), it should be aligned on 32 bits. For most of the authentication algorithms, the ICV size is 96 bits. The AH header alignment on 32 or 64 bits gives the same results. However for SHA-256-128 for instance, the wrong 64 bit alignment results in adding useless padding in IPv4 AH, which is forbidden by the RFC. To avoid breaking backward compatibility, we use a new flag (XFRM_STATE_ALIGN4) do change original behavior. Initial patch from Dang Hongwu <hongwu.dang@6wind.com> and Christophe Gouault <christophe.gouault@6wind.com>. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Orishko 提交于
Specification links: - CDC NCM errata link: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zip Changes: - driver updated to match cdc.h header with errata changes - added support for USB_CDC_SET_NTB_INPUT_SIZE control request with 8 byte length - fixes to comply with specification: send only control requests supported by device, set number of datagrams for IN direction, connection speed structure update, etc. - packet loss fixed for tx direction; misleading flag renamed. - adjusted hard_mtu value. Signed-off-by: NAlexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Orishko 提交于
Changes are based on the following documents: - CDC NCM errata: http://www.usb.org/developers/devclass_docs/NCM10_012011.zip - CDC and WMC errata link: http://www.usb.org/developers/devclass_docs/CDC1.2_WMC1.1_012011.zipSigned-off-by: NAlexey Orishko <alexey.orishko@stericsson.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 08 2月, 2011 20 次提交
-
-
由 Don Skidmore 提交于
This will synchronize the version string with that of the latest source forge driver which shares its functionality. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
The ixgbe_fcoe_ddp_get function wasn't initializing one of its variables and this was producing compiler warnings. This patch cleans that up. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change fixes VM pool allocation issues based on MAC address filtering, as well as limits the scope of VF access to promiscuous mode. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
We have found a hardware erratum on 82599 hardware that can lead to unpredictable behavior when Header Splitting mode is enabled. So we are no longer enabling this feature on affected hardware. Please see the 82599 Specification Update for more information. CC: stable@kernel.org Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
Caught with gcc 4.6 -Wunused-but-set-variable Remove unused napi_vectors variable. Fix the use of reset_bit in ixgbe_reset_hw_X540() Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Florian Fainelli 提交于
This patch adds support for Marvell Alask M88E188R PHY chips. Support for other M88* PHYs is already there, so there is nothing more to add than its PHY id. CC: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Currently the driver increments the tx_timeout counter (an error counter) when simply resetting the part with outstanding transmit work pending. This is an unnecessary count of an error, when all we should be doing is just resetting the part and discarding the transmits. With this change the only increment of tx_timeout is when the stack calls the watchdog reset function due to a true Tx timeout. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
-
由 Sven Eckelmann 提交于
We access the data inside the skbs of two fragments directly using memmove during the merge. The data of the skb could span over multiple skb pages. An direct access without knowledge about the pages would lead to an invalid memory access. Signed-off-by: NSven Eckelmann <sven@narfation.org> [lindner_marek@yahoo.de: Move return from function to the end] Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
-
由 andrew hendry 提交于
Originally x25_parse_facilities returned -1 for an error 0 meaning 0 length facilities >0 the length of the facilities parsed. 5ef41308 ("x25: Prevent crashing when parsing bad X.25 facilities") introduced more error checking in x25_parse_facilities however used 0 to indicate bad parsing a6331d6f ("memory corruption in X.25 facilities parsing") followed this further for DTE facilities, again using 0 for bad parsing. The meaning of 0 got confused in the callers. If the facilities are messed up we can't determine where the data starts. So patch makes all parsing errors return -1 and ensures callers close and don't use the skb further. Reported-by: NAndy Whitcroft <apw@canonical.com> Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
"ap" is the address of sdata->u.ap so it can never be NULL here. Also we dereferenced it on the previous line. I removed the check. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohammed Shafi Shajakhan 提交于
Add few comments for not parsing DTIM period from mac80211 Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohammed Shafi Shajakhan 提交于
mac80211 now supports passing MCS index to radiotap, so update the comments regarding this Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Since 4-addr frames completely override the source address which will make it into the converted 802.3 frames, receiving frames for other 4-addr stations will confuse the bridging code. To be able to handle traffic for all connected devices, the bridge code will automatically turn on promiscuous mode, which triggers this problem. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Reported-by: NSteve Brown <sbrown@cortland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Greear 提交于
This allows users to tune the connection-loss algorithms to be more or less lenient. In particular, larger null-func retries helps when using lots of virtual stations on a loaded network. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Nick Kossifidis 提交于
Fast channel change fixes: a) Always set OFDM timings b) Don't re-activate PHY c) Enable only NF calibration, not AGC Signed-off-by: NNick Kossifidis <mickflemm@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Using skb_header_cloned to check if it's safe to write to the skb is not enough - mac80211 also touches the tailroom of the skb. Initially this check was only used to increase a counter, however this commit changed the code to also skip skb data reallocation if no extra head/tailroom was needed: commit 4cd06a34 mac80211: skip unnecessary pskb_expand_head calls It added a regression at least with iwl3945, which is fixed by this patch. Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Tested-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Don Fry 提交于
With commit 554d1d02 only one RF_KILL interrupt will be seen by the driver when the interface is down. Re-enable the interrupt when it occurs to see all transitions. Signed-off-by: NDon Fry <donald.h.fry@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Büsch 提交于
This fixes parsing of the device invariants (MAC address) for PCMCIA SSB devices. ssb_pcmcia_do_get_invariants expects an iv pointer as data argument. Tested-by: Ndylan cristiani <d.cristiani@idem-tech.it> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vasanthy Kolluri 提交于
Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NDavid Wang <dwang2@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-