The enable functions grabbed dev->struct_mutex themselves, whereas
the disable functions expected dev->struct_mutex to be held by the
caller. Move the locking out to the (currently only) callsite of
intel_enable_gt_powersave to make this more consistent.

Originally this was prep work for future patches, but I've chased down
a totally wrong alley. Still, I think this is a sensible
clarification.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

... instead of calling each one for each generation indiviudally.

Notice that we've already managed to be inconsistent, the resume path
is missing an IS_VLV check. As a nice benefit we can mark all the
platform specific enable/disable functions as static and hide them in
intel_pm.c
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This box claims to have an LVDS interface but doesn't
actually have one.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the code in place, we can bind the driver, should make bisect possible.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Enable the on-chip messaging between the display engine and the GT.

v2: use bit definitions for DPFLIPSTAT reg
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And restructure the IRQ handling a little.  We can use pipestat for most
things, and make sure we don't affect pipe events when enabling and
disabling vblank interupts.

We can leave vblank interrupts masked but enabled so we're not dependent
on the first client to toggle the disable timer.  We can also mask all
render based interrupts, since the ring code will handle unmasking them
for us.

v2: roll in vblank masking, remove unneeded variable (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Needs some more work and testing.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since the offsets have all moved around.

v2: switch IS_DISPLAYREG and IS_VALLEYVIEW checks around since the latter is
    cheaper (Daniel)
    bail out early in IS_DISPLAYREG if the reg is in the new range (Daniel)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Fixup if cascading fail that broke HAS_FORCEWAKE machines.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ValleyView is similar to IbexPeak here, but with different register
offsets.

v2: use SDVOB instead ov VLV_HDMIB (Daniel)
    drop unnecessary eDP check in DP_C init (Daniel)

eDP support will be coming later from Shobit.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Might be able to merge this back in at some point, but we're seeing bugs
with ADPA based detection, so keep it separate for now with explicit
hotplug trigger usage.

v2: drop superfluous debug message
v3: comment forced detection, need to debug (Eugeni)
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV supports two dp panels, there are two set of panel power sequence
registers which needed to be programmed based on the configured
pipe. This patch add supports for the same
Acked-by: NAcked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NBeeresh G <beeresh.g@intel.com>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Drop the lone hunk and only keep the register definitions - I
loathe incomplete bandaids. Also add a comment that this is for vlv.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add some VLV limit structures and update the PLL code.

v2: resolve conflicts, Vijay to re-post with PLL valid checks and fixed limits
v3: re-add dpio write function
v4: squash in Vijay's fixes for the PLL limits and clean up the m/n finder
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is just the minimal patch to disable all this code so that we can
do decent amounts of QA before we rip it all out.

The complicating thing is that we need to flush the gpu caches after
the batchbuffer is emitted. Which is past the point of no return where
execbuffer can't fail any more (otherwise we risk submitting the same
batch multiple times).

Hence we need to add a flag to track whether any caches associated
with that ring are dirty. And emit the flush in add_request if that's
the case.

Note that this has a quite a few behaviour changes:
- Caches get flushed/invalidated unconditionally.
- Invalidation now happens after potential inter-ring sync.

I've bantered around a bit with Chris on irc whether this fixes
anything, and it might or might not. The only thing clear is that with
these changes it's much easier to reason about correctness.

Also rip out a lone get_next_request_seqno in the execbuffer
retire_commands function. I've dug around and I couldn't figure out
why that is still there, with the outstanding lazy request stuff it
shouldn't be necessary.

v2: Chris Wilson complained that I also invalidate the read caches
when flushing after a batchbuffer. Now optimized.

v3: Added some comments to explain the new flushing behaviour.

Cc: Eric Anholt <eric@anholt.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It seems to blow up my ilk in all kinds of strange ways. And now that
we're no longer resetting the entire modeset state, it shouldn't be
necessary any longer.

This essentially reverts

commit f817586c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Apr 10 15:50:11 2012 +0200

    drm/i915: re-init modeset hw state after gpu reset

safe for the introduction of modeset_init_hw, that one is nice to
prevent code duplication between driver load and resume.

v2: Add a comment to the code to warn future travellers of the dragon
dungeon ahead, suggested by Chris Wilson.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise userspace has no way to figure this out.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The idr code already passes us the pointer associated with that id, so
no need to look it up again. Also, we'll kill the idr right away, so
there's no issue with leaving these dangling pointers behind - the
current code does the same.

v2: Also drop the file argument, spotted by Ben Widawsky.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It found some unused variables.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is our customary "no such object" errno, not -EINVAL.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It doesn't hurt and it at least prevents us from OOPSing left and
right at quite a few places. This also allows us to simplify the code
a bit by folding the only line of context_open into the callsite.

We obviuosly also need to run the cleanup code unconditionally, too.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

commit 8e96d9c4
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Mon Jun 4 14:42:56 2012 -0700

    drm/i915: reset the GPU on context fini

broke module unload because it reset the gpu before we've stopped
touching it. Later on in the unload sequence the ringbuffer code
complained that the gpu would idle properly (because intel_gpu_reset
only resets the hw and not our sw state).

v2: Reorder things so that we reset the gpu _before_ we release the
backing storage of the default context.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51183Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prevents a possible hang: WaDisableL3Bank2xClockGate.

v2: only apply to VLV, IVB doesn't need this anymore

References: https://bugs.freedesktop.org/show_bug.cgi?id=50245Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Another required workaround for a potential hang:
WaDisableTDLUnitClockGating.

v2: only apply this to VLV, IVB doesn't need it anymore (Eugeni)

References: https://bugs.freedesktop.org/show_bug.cgi?id=50245Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to the bspec for MBCTL:

Driver must set bit in the following scenarios:
  - to realod teh h/w boot context every time it gets loaded through OS
  - after an FLR clears the register (BIOS won't run afterwards)

References: https://bugs.freedesktop.org/show_bug.cgi?id=50237Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The RCBP workaround still applies on these chips, and we need VDS as well.

v2: remove MB boot fetch that snuck in (Daniel)
    add workaround tags to comments for easier internal tracking (Daniel)
v3: only apply RCPB and VDS on SNB and VLV, IVB doesn't need them (Eugeni)

References: https://bugs.freedesktop.org/show_bug.cgi?id=50251Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've added a bit of logic such that running the hangman test on chips
without any hw reset support at all doesn't wedge the gpu because the
reset failed. This relied on checking for non-null stop_rings.
Unfortunately I've botched a rebase somewhere and stop_rings is still
cleared at the old place before the reset code.

Fix this up so that running the i-g-t tests on gen2/3 doesn't result
in a wedged gpu.

v2: Actually remove the lines instead of adding them twice ... my git
license should be revoked immediately.
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I'm seeing about a 5% FPS improvement across various benchmarks on my
IVB i3. Rumor has it that the higher end parts show even more benefit.

This derives from a patch originally given to me by Bernard. The docs
are  confusing about the definition names (ie. medium really seems like
max), but it would seem it gives more cache to the GT at the expense of
uncore. This configuration makes the split most in favor of the GT. I've
not tried the other IDICOS values.

Cc: "Kilarski, Bernard R" <bernard.r.kilarski@intel.com>
Acked-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This got dropped as a result of the last round of comments. I didn't
test it on unsupported HW (which this is likely the case).

Note that this prevents hw context from blowing up on any pre-gen6 hw.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51142
[danvet: Added note and buglink.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow this went unnoticed in the past reviews, but the condition would
never timeout properly.

This was initially introduced in the v2 of original SBI enabling patch.
Highly embarrassing.

Note that we now actually time out for the read, which resulted in gcc
complaining that we can now return unitialized garbage if that
happens. There's not much we can do here because there's not much
point in thread -EIO all the way down through these functions. Hence
simply shut up the compiler.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: Added note and squashed uninitialized value shut-up into this
patch.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They aren't going anywhere, and probing on DDC can cause the panel to
blank briefly, so read them up front and cache them for later queries.

v2: fix potential NULL derefs in intel_dp_get_edid_modes and
    intel_dp_get_edid (Jani)
    copy full EDID length, including extension blocks (Takashi)
    free EDID on teardown (Takashi)
v3: malloc a new EDID buffer that's big enough for the memcpy (Chris)
v4: change handling of NULL EDIDs, just preserve the NULL behavior
    across detects and mode list fetches rather than trying to re-fetch
    the EDID (Chris)
v5: be glad that Chris is around to remind me to hit C-x C-s before
    committing.

References: https://bugs.freedesktop.org/show_bug.cgi?id=46856Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 092945e1.

This commit prevents a DP screen from properly training the link.
Oddly enough it works, once the machine has been warm-booted with an
older kernel.

According to DP docs this _should_ have been the right precharge time.
Also, the commit that originally introduces this was just general snb
DP enabling and didn't mention any specific reason for this special
value. Whatever, trust the reporter that this makes things worse and
let's just revert it.

v2: Less spelling fail.

Cc: Adam Jackson <ajax@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reported-by: N"Wouter M. Koolen" <W.M.Koolen-Wijkstra@cwi.nl>
Buglink: https://lkml.org/lkml/2012/6/14/301
Cc: stable@vger.kernel.org (only for 3.4)
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The new oui probe has been missing these.

This issue has been introduce in

commit 0d198328
Author: Adam Jackson <ajax@redhat.com>
Date:   Mon May 14 16:05:47 2012 -0400

    drm/i915/dp: Probe branch/sink OUIs

v2: Do the eDP vdd dance of simply not probing the OUI on eDP panels
as suggested by Chris Wilson.

v3: Fix up the error path fail - I suck.

Cc: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50808Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Bugreport: http://permalink.gmane.org/gmane.comp.video.dri.devel/69695Tested-by: NYang Guang <guang.a.yang@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This prevents the HDMI detect functions from poking at an eDP
connected panel, which can lead to trouble.

[danvet: Note that we have some other reports of DP vs. HDMI fighting,
but the general case is a much bigger fish to fry.]

References: https://bugs.freedesktop.org/show_bug.cgi?id=42278Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VGA hotplug detection "works" by measuring the resistance across
certain pins. A lot of kvm switches fumble this and wire up cheap
resistors with the wrong resistance or don't bother at all.

To accomodate these, also try to detect a connected monitor by trying
to grab the edid. Contrary to !HAS_HOTPLUG platforms we don't bother
with an actual load-detection cycle when the output is life - that
would be actual work to implement because things moved around. This is
the big difference to Chris Wilson's original approach:

commit 9e612a00
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu May 31 13:08:53 2012 +0100

    drm/i915/crt: Do not rely upon the HPD presence pin

This blew up on Linus' machine because it errornously detected a vga
screen (without and edid and hence only the default modes), leading to
it's prompt removal:

commit 8f53369b
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Fri Jun 8 14:53:06 2012 -0700

    Revert "drm/i915/crt: Do not rely upon the HPD presence pin"

Some digging around in Bspec shows the reason why load detect doesn't work on
newer chips - the legacy VGA load detect bit isn't wired up any longer:

Public Snb Bspec, Vol3 Part1, 1.1.1 ST00 Input Status 0, bit4:

"RGB Comparator / Sense. This bit is here for compatibility and will
always return one. Monitor detection must be done be done through the
programming of registers in the MMIO space.
0 = Below threshold
1 = Above threshold"

v2: Add a comment in the code that load detect on hotplug capable
machines is broken and pimp the commit message with a quote of Bspec
to show why.
Reported-and-tested-by: NMatthieu LAVIE <boiteamadmax@hotmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50501Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's the only way we know how to make the GPU actually forget about the
default context.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

Use the rsvd1 field in execbuf2 to specify the context ID associated
with the workload. This will allow the driver to do the proper context
switch when/if needed.

v2: Add checks for context switches on rings not supporting contexts.
Before the code would silently ignore such requests.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

Add the interfaces to allow user space to create and destroy contexts.
Contexts are destroyed automatically if the file descriptor for the dri
device is closed.

Following convention as usual here causes checkpatch warnings.

v2: with is_initialized, no longer need to init at create
drop the context switch on create (daniel)

v3: Use interruptible lock (Chris)
return -ENODEV in !GEM case (Chris)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

To keep things as sane as possible, switch to the default context before
idling. This should help free context objects, as well as put things in
a more well defined state before suspending.

v2: remove seqno from context switch call (daniel)
return error on failed context switch instead of WARN+continue (daniel)

v3: move idling to i915_gpu idle (from i915_gem_idle) (Chris)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

Signed-off-by: NBen Widawsky <ben@bwidawsk.net>

With the code to do HW context switches in place have the driver load the
default context for the render ring when the driver loads.

The default context will be an ever present context that is available to
switch to at any time for the given ring.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>