__fls(x) is a bit faster than fls(x), granted we know x is non null.

As Ben Hutchings pointed out, fls(x) = __fls(x) + 1
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Avoid dirtying neighbour's confirmed field.

  TCP workloads hits this cache line for each incoming ACK.
  Lets write n->confirmed only if there is a jiffie change.

2) Optimize neigh_hh_output() for the common Ethernet case, were
   hh_len is less than 16 bytes. Replace the memcpy() call
   by two inlined 64bit load/stores on x86_64.

Bench results using udpflood test, with -C option (MSG_CONFIRM flag
added to sendto(), to reproduce the n->confirmed dirtying on UDP)

24 threads doing 1.000.000 UDP sendto() on dummy device, 4 runs.

before : 2.247s, 2.235s, 2.247s, 2.318s
after  : 1.884s, 1.905s, 1.891s, 1.895s
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixing the cpsw device tree example to make it simpler to copy pastable to dts
file and use it directly.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

device tree implementation for davinci mdio driver
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While playing with CoDel and ECN marking, I discovered a
non optimal behavior of receiver of CE (Congestion Encountered)
segments.

In pathological cases, sender has reduced its cwnd to low values,
and receiver delays its ACK (by 40 ms).

While RFC 3168 6.1.3 (The TCP Receiver) doesn't explicitly recommend
to send immediate ACKS, we believe its better to not delay ACKS, because
a CE segment should give same signal than a dropped segment, and its
quite important to reduce RTT to give ECE/CWR signals as fast as
possible.

Note we already call tcp_enter_quickack_mode() from TCP_ECN_check_ce()
if we receive a retransmit, for the same reason.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While doing TCP ECN tests, I discovered GRO was reordering packets if it
receives one packet with CE set, while previous packets in same NAPI run
have ECT(0) for the same flow :

09:25:25.857620 IP (tos 0x2,ECT(0), ttl 64, id 27893, offset 0, flags
[DF], proto TCP (6), length 4396)
    172.30.42.19.54550 > 172.30.42.13.44139: Flags [.], seq
233801:238145, ack 1, win 115, options [nop,nop,TS val 3397779 ecr
1990627], length 4344

09:25:25.857626 IP (tos 0x3,CE, ttl 64, id 27892, offset 0, flags [DF],
proto TCP (6), length 1500)
    172.30.42.19.54550 > 172.30.42.13.44139: Flags [.], seq
232353:233801, ack 1, win 115, options [nop,nop,TS val 3397779 ecr
1990627], length 1448

09:25:25.857638 IP (tos 0x0, ttl 64, id 34581, offset 0, flags [DF],
proto TCP (6), length 64)
    172.30.42.13.44139 > 172.30.42.19.54550: Flags [.], cksum 0xac8f
(incorrect -> 0xca69), ack 232353, win 1271, options [nop,nop,TS val
1990627 ecr 3397779,nop,nop,sack 1 {233801:238145}], length 0

We have two problems here :

1) GRO reorders packets

  If NIC gave packet1, then packet2, which happen to be from "different
flows"  GRO feeds stack with packet2, then packet1. I have yet to
understand how to solve this problem.

2) GRO is not ECN friendly

Delivering packets out of order makes TCP stack not as fast as it could
be.

In this patch I suggest we make the tos test not part of the 'same_flow'
determination, but part of the 'should flush' logic
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reduce IP latencies by placing hot MIB IP fields in a single cache line.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid two instructions to reload dev->nd_net->mib.ip_statistics pointer,
unsing a temp variable, in ip_rcv(), ip_output() paths for example.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

performance profiles show a high cost in the IN_DEV_ROUTE_LOCALNET()
call done in ip_route_input_slow(), because of multiple dereferences,
even if cache lines are clean and available in cpu caches.

Since we already have the 'net' pointer, introduce
IN_DEV_NET_ROUTE_LOCALNET() macro avoiding two dereferences
(dev_net(in_dev->dev))

Also change the tests to use IN_DEV_NET_ROUTE_LOCALNET() only if saddr
or/and daddr are loopback addresse.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use net_hash_mix(net) instead of hash_ptr(net, 8), and use
hash_32() instead of using a serie of XOR

Define IN4_ADDR_HSIZE_SHIFT for clarity

__ip_dev_find() can perform the net_eq() call only if ifa_local
matches the key, to avoid unneeded dereferences.

remove inline attributes

# size net/ipv4/devinet.o.before net/ipv4/devinet.o
   text	   data	    bss	    dec	    hex	filename
  17471	   2545	   2048	  22064	   5630	net/ipv4/devinet.o.before
  17335	   2545	   2048	  21928	   55a8	net/ipv4/devinet.o
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to avoid false drop_monitor indications, we should
call consume_skb() if skb_clone() was successful.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds device tree support for cpsw driver
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cpsw is dependent on davinci_cpdma and davinci_mdio, so adding SOC support for
dependent modules
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 64 bit stats to ppp driver.  The 64 bit stats include tx_bytes,
rx_bytes, tx_packets and rx_packets.  Other stats are still 32 bit.
The 64 bit stats can be retrieved via the ndo_get_stats operation.  The
SIOCGPPPSTATS ioctl is still 32 bit stats only.
Signed-off-by: NKevin Groeneveld <kgroeneveld@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to what bonding has. This allows to set queue_id for port so
this port will be used when skb with matching skb->queue_mapping is
going to be transmitted.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow userspace to set port priority.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed types might be needed in NL communication from time to time
(I need s32 in team driver), so add them.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix build error on cris (not tested, no toolchain here):

drivers/net/cris/eth_v10.c: error: too many arguments to function 'e100rxtx_interrupt'
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc:	Mikael Starvik <starvik@axis.com>
Cc:	Jesper Nilsson <jesper.nilsson@axis.com>
Cc:	linux-cris-kernel@axis.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hello,

looking at http://sourceforge.net/apps/mediawiki/mbm/index.php?title=Main_Page#Supported_devices, there are branded Ericsson devices from Dell and Toshiba.

The to-be-added vendor IDs are 0x413c for Dell and 0x0930 for Toshiba.

Please find attached a patch to add these vendor IDs.
Signed-off-by: NPeter Meiser <meiser@gmx-topmail.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix a buffer overflow bug by removing the revision and printk.

[   22.016214] isdnloop-ISDN-driver Rev 1.11.6.7
[   22.097508] isdnloop: (loop0) virtual card added
[   22.174400] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff83244972
[   22.174400]
[   22.436157] Pid: 1, comm: swapper Not tainted 3.5.0-bisect-00018-gfa8bbb13-dirty #129
[   22.624071] Call Trace:
[   22.720558]  [<ffffffff832448c3>] ? CallcNew+0x56/0x56
[   22.815248]  [<ffffffff8222b623>] panic+0x110/0x329
[   22.914330]  [<ffffffff83244972>] ? isdnloop_init+0xaf/0xb1
[   23.014800]  [<ffffffff832448c3>] ? CallcNew+0x56/0x56
[   23.090763]  [<ffffffff8108e24b>] __stack_chk_fail+0x2b/0x30
[   23.185748]  [<ffffffff83244972>] isdnloop_init+0xaf/0xb1
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to wait for send_completion msg before put_rndis_request() at
the end of rndis_filter_halt_device(). Otherwise, netvsc_send_completion()
may reference freed memory which is overwritten, and cause panic.
Reported-by: NLong Li <longli@microsoft.com>
Reported-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Port1=Eth, Port2=IB restriction is no longer required.
Having RoCE, there will always rdma port initialized over ConnectX
physical port, no matter whether the link layer is IB or Ethernet.
So we always have dual port IB device.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removing the ring->blocked flag, it is redundant and leads to a race:

We close the TX queue and then set the "blocked" flag.
Between those 2 operations the completion function can check the "blocked"
flag, sees that it is 0, and wouldn't open the TX queue.

Using netif_tx_queue_stopped to check the state of the queue to avoid this race.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Should NOT check SMAC=DMAC when:
1. loopback is turned on
2. validate_loopback is true.

Fixed it accordingly.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gact_rand array is accessed by gact->tcfg_ptype whose value
is assumed to less than MAX_RAND, but any range checks are
not performed.

So add a check in tcf_gact_init(). And in tcf_gact(), we can
reduce a branch.
Signed-off-by: NHiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing a CR in printk causes 2 messages printed in one line.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

AR1111 is same as AR9485. The h/w
difference between them is quite insignificant,
Felix suggests only very few baseband features
may not be available in AR1111. The h/w code for
AR9485 is already present, so AR1111 should
work fine with the addition of its PID/VID.

Cc: stable@vger.kernel.org [2.6.39+]
Cc: Felix Bitterli <felixb@qca.qualcomm.com>
Reported-by: NTim Bentley <Tim.Bentley@Gmail.com>
Signed-off-by: NMohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Tested-by: NTim Bentley <Tim.Bentley@Gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

brcmsmac cannot call freq_reg_info() during channel changes as it does
not hold cfg80211_lock, and as a result it generates a lockdep warning.
freq_reg_info() is being used to determine whether OFDM is allowed on
the current channel, so we can avoid the errant call by using the new
IEEE80211_CHAN_NO_OFDM for this purpose instead.
Reported-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The if_sdio_card structure was never being freed, and neither
was the command structure used for association.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch is going to fix the resuming failed from S3/S4
for rt3290 chip.
Signed-off-by: NWoody Hung <Woody.Hung@mediatek.com>
Cc: Kevin Chou <kevin.chou@mediatek.com>
Signed-off-by: NChen, Chien-Chia <machen@suse.com>
Reviewed-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

On an OLPC XO-1.5 we have seen the following situation:
 - the system starts going into suspend
 - no wake params are set, so the mmc layer removes the card
 - during remove, we send a command to the card
 - that command fails, causing if_sdio's reset method to try and remove
   the mmc card in attempt to reset it
 - the mmc layer is not happy about being asked to remove a card that
   it is already removing, and the kernel crashes

While the MMC layer could possibly be taught to behave better here,
it also seems sensible for libertas not to try and reset a card if
we're in the process of removing it anyway.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add some comments by the way
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Restore the default state to the "beacon_found" flag when
the channel flags are restored.  Otherwise, we can end up
with a channel that we can no longer transmit on even when
we can see beacons on that channel.
Signed-off-by: NPaul Stewart <pstew@chromium.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently the only way for wireless drivers to tell whether or not OFDM
is allowed on the current channel is to check the regulatory
information. However, this requires hodling cfg80211_mutex, which is not
visible to the drivers.

Other regulatory restrictions are provided as flags in the channel
definition, so let's do similarly with OFDM. This patch adds a new flag,
IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not
allowed. This flag is set on any channels for which regulatory indicates
that OFDM is prohibited.
Signed-off-by: NSeth Forshee <seth.forshee@canonical.com>
Tested-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current firmware version used by the device driver
is 7.12.0

Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Divy Le Ray <divy@chelsio.com>
Cc: netdev@vger.kernel.org
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>

Remove unused includes after IP cache removal
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>