Switch to the improved update_vsyscall interface that provides
sub-nanosecond precision for gettimeofday and clock_gettime.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

When translating a user space address, the address must be checked against
the ASCE limit of the process. If the address is larger than the maximum
address that is reachable with the ASCE, an ASCE type exception must be
generated.

The current code simply ignored the higher order bits. This resulted in an
address wrap around in user space instead of an exception in user space.

Cc: stable@vger.kernel.org # v3.9+
Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Always use the mvcl instruction to copy a page instead of mvpg or a
couple of mvc instructions.
Copying a huge page is 25% faster this way. Also bypass caches when
copying pages since only parts of a page will be used afterwards.
Especially when copying a huge page this would kick everything out
of the L1 and L2 data caches on a zEC12 machine.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

An I/O request that does not read or write full blocks cannot be
translated into a correct CCW or TCW program and should be rejected
right away. In particular the code that creates TCW requests will not
notice this problem and create broken TCWs that will be rejected by
the hardware.
Signed-off-by: NStefan Weinhuber <wein@de.ibm.com>
Reference-ID: RQM1956

Commit "s390: fix handling of runtime instrumentation psw bit" (5ebf250d)
changed the behavior of setting the runtime instrumentation psw bit.  This
commit restores the original logic:

1. When returning from the signal handler, the runtime instrumentation psw bit
   is restored to its saved state.
2. If the runtime instrumentation psw bit is enabled during the signal handler,
   it is always turned off when leaving the signal handler.  The saved state
   is restored as described in 1.  That also implies that turning on runtime
   instrumentation in the signal handler is only effective while running in the
   signal context.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>

It appears that driver runs into a problem here if fibsize is too small
because we allocate user_srbcmd with fibsize size only but later we
access it until user_srbcmd->sg.count to copy it over to srbcmd.

It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this
structure already includes one sg element and this is not needed for
commands without data.  So, we would recommend to add the following
(instead of test for fibsize == 0).
Signed-off-by: NMahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:
 "Mostly these are fixes for fallout due to merge window changes, as
  well as cures for problems that have been with us for a much longer
  period of time"

 1) Johannes Berg noticed two major deficiencies in our genetlink
    registration.  Some genetlink protocols we passing in constant
    counts for their ops array rather than something like
    ARRAY_SIZE(ops) or similar.  Also, some genetlink protocols were
    using fixed IDs for their multicast groups.

    We have to retain these fixed IDs to keep existing userland tools
    working, but reserve them so that other multicast groups used by
    other protocols can not possibly conflict.

    In dealing with these two problems, we actually now use less state
    management for genetlink operations and multicast groups.

 2) When configuring interface hardware timestamping, fix several
    drivers that simply do not validate that the hwtstamp_config value
    is one the driver actually supports.  From Ben Hutchings.

 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar.

 4) In dev_forward_skb(), set the skb->protocol in the right order
    relative to skb_scrub_packet().  From Alexei Starovoitov.

 5) Bridge erroneously fails to use the proper wrapper functions to make
    calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid.  Fix from Toshiaki
    Makita.

 6) When detaching a bridge port, make sure to flush all VLAN IDs to
    prevent them from leaking, also from Toshiaki Makita.

 7) Put in a compromise for TCP Small Queues so that deep queued devices
    that delay TX reclaim non-trivially don't have such a performance
    decrease.  One particularly problematic area is 802.11 AMPDU in
    wireless.  From Eric Dumazet.

 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts
    here.  Fix from Eric Dumzaet, reported by Dave Jones.

 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn.

10) When computing mergeable buffer sizes, virtio-net fails to take the
    virtio-net header into account.  From Michael Dalton.

11) Fix seqlock deadlock in ip4_datagram_connect() wrt.  statistic
    bumping, this one has been with us for a while.  From Eric Dumazet.

12) Fix NULL deref in the new TIPC fragmentation handling, from Erik
    Hugne.

13) 6lowpan bit used for traffic classification was wrong, from Jukka
    Rissanen.

14) macvlan has the same issue as normal vlans did wrt.  propagating LRO
    disabling down to the real device, fix it the same way.  From Michal
    Kubecek.

15) CPSW driver needs to soft reset all slaves during suspend, from
    Daniel Mack.

16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet.

17) The xen-netfront RX buffer refill timer isn't properly scheduled on
    partial RX allocation success, from Ma JieYue.

18) When ipv6 ping protocol support was added, the AF_INET6 protocol
    initialization cleanup path on failure was borked a little.  Fix
    from Vlad Yasevich.

19) If a socket disconnects during a read/recvmsg/recvfrom/etc that
    blocks we can do the wrong thing with the msg_name we write back to
    userspace.  From Hannes Frederic Sowa.  There is another fix in the
    works from Hannes which will prevent future problems of this nature.

20) Fix route leak in VTI tunnel transmit, from Fan Du.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
  genetlink: make multicast groups const, prevent abuse
  genetlink: pass family to functions using groups
  genetlink: add and use genl_set_err()
  genetlink: remove family pointer from genl_multicast_group
  genetlink: remove genl_unregister_mc_group()
  hsr: don't call genl_unregister_mc_group()
  quota/genetlink: use proper genetlink multicast APIs
  drop_monitor/genetlink: use proper genetlink multicast APIs
  genetlink: only pass array to genl_register_family_with_ops()
  tcp: don't update snd_nxt, when a socket is switched from repair mode
  atm: idt77252: fix dev refcnt leak
  xfrm: Release dst if this dst is improper for vti tunnel
  netlink: fix documentation typo in netlink_set_err()
  be2net: Delete secondary unicast MAC addresses during be_close
  be2net: Fix unconditional enabling of Rx interface options
  net, virtio_net: replace the magic value
  ping: prevent NULL pointer dereference on write to msg_name
  bnx2x: Prevent "timeout waiting for state X"
  bnx2x: prevent CFC attention
  bnx2x: Prevent panic during DMAE timeout
  ...

Pull sparc fixes from David Miller:
 "Two merge window fallout build fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: merge fix
  sparc64: fix build regession

Pull ia64 fix from Tony Luck:
 "Unbreak ia64 build by avoiding circular dependency"

* tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  kernel/bounds: avoid circular dependencies in generated headers

<linux/spinlock.h> has heavy dependencies on other header files.
It triggers circular dependencies in generated headers on IA64, at
least:

  CC      kernel/bounds.s
In file included from /home/space/kas/git/public/linux/arch/ia64/include/asm/thread_info.h:9:0,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/ia64/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/spinlock.h:50,
                 from kernel/bounds.c:14:
/home/space/kas/git/public/linux/arch/ia64/include/asm/asm-offsets.h:1:35: fatal error: generated/asm-offsets.h: No such file or directory
compilation terminated.

Let's replace <linux/spinlock.h> with <linux/spinlock_types.h>, it's
enough to find out size of spinlock_t.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Johannes Berg says:

====================
genetlink: clean up multicast group APIs

The generic netlink multicast group registration doesn't have to
be dynamic, and can thus be simplified just like I did with the
ops. This removes some complexity in registration code.

Additionally, two users of generic netlink already use multicast
groups in a wrong way, add workarounds for those two to keep the
userspace API working, but at the same time make them not clash
with other users of multicast groups as might happen now.

While making it all a bit easier, also prevent such abuse by adding
checks to the APIs so each family can only use the groups it owns.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a static inline to generic netlink to wrap netlink_set_err()
to make it easier to use here - use it in openvswitch (the only
generic netlink user of netlink_set_err()).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's no reason to have the family pointer there since it
can just be passed internally where needed, so remove it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no users of this API remaining, and we'll soon
change group registration to be static (like ops are now)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's no need to unregister the multicast group if the
generic netlink family is registered immediately after.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The quota code is abusing the genetlink API and is using
its family ID as the multicast group ID, which is invalid
and may belong to somebody else (and likely will.)

Make the quota code use the correct API, but since this
is already used as-is by userspace, reserve a family ID
for this code and also reserve that group ID to not break
userspace assumptions.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The drop monitor code is abusing the genetlink API and is
statically using the generic netlink multicast group 1, even
if that group belongs to somebody else (which it invariably
will, since it's not reserved.)

Make the drop monitor code use the proper APIs to reserve a
group ID, but also reserve the group id 1 in generic netlink
code to preserve the userspace API. Since drop monitor can
be a module, don't clear the bit for it on unregistration.
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

snd_nxt must be updated synchronously with sk_send_head.  Otherwise
tp->packets_out may be updated incorrectly, what may bring a kernel panic.

Here is a kernel panic from my host.
[  103.043194] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
[  103.044025] IP: [<ffffffff815aaaaf>] tcp_rearm_rto+0xcf/0x150
...
[  146.301158] Call Trace:
[  146.301158]  [<ffffffff815ab7f0>] tcp_ack+0xcc0/0x12c0

Before this panic a tcp socket was restored. This socket had sent and
unsent data in the write queue. Sent data was restored in repair mode,
then the socket was switched from reapair mode and unsent data was
restored. After that the socket was switched back into repair mode.

In that moment we had a socket where write queue looks like this:
snd_una    snd_nxt   write_seq
   |_________|________|
             |
	  sk_send_head

After a second switching from repair mode the state of socket was
changed:

snd_una          snd_nxt, write_seq
   |_________ ________|
             |
	  sk_send_head

This state is inconsistent, because snd_nxt and sk_send_head are not
synchronized.

Bellow you can find a call trace, how packets_out can be incremented
twice for one skb, if snd_nxt and sk_send_head are not synchronized.
In this case packets_out will be always positive, even when
sk_write_queue is empty.

tcp_write_wakeup
	skb = tcp_send_head(sk);
	tcp_fragment
		if (!before(tp->snd_nxt, TCP_SKB_CB(buff)->end_seq))
			tcp_adjust_pcount(sk, skb, diff);
	tcp_event_new_data_sent
		tp->packets_out += tcp_skb_pcount(skb);

I think update of snd_nxt isn't required, when a socket is switched from
repair mode.  Because it's initialized in tcp_connect_init. Then when a
write queue is restored, snd_nxt is incremented in tcp_event_new_data_sent,
so it's always is in consistent state.

I have checked, that the bug is not reproduced with this patch and
all tests about restoring tcp connections work fine.

Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

init_card() calls dev_get_by_name() to get a network deceive. But it
doesn't decrease network device reference count after the device is
used.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After searching rt by the vti tunnel dst/src parameter,
if this rt has neither attached to any transformation
nor the transformation is not tunnel oriented, this rt
should be released back to ip layer.

otherwise causing dst memory leakage.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The parameter is just 'group', not 'groups', fix the documentation typo.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull second set of ARC changes from Vineet Gupta:
 - Support for Perf from Mischa
 - Enabling GPIO/Pinctrl drivers for Abilis TB10x platform
 - New defconfig for buildroot

* tag 'arc-v3.13-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-arcfpga] Add defconfig without initramfs location
  ARC: perf: ARC 700 PMU doesn't support sampling events
  ARC: Add documentation on DT binding for ARC700 PMU
  ARC: Add perf support for ARC700 cores
  ARC: [TB10x] Updates for GPIO and pinctrl

Pull second set of s390 patches from Martin Schwidefsky:
 "The handling of the PCI hotplug notifications has been improved, the
  zfcp dumper can now detect the HSA size dynamically and the default
  install kernel has been changed to the compressed bzImage.  And two
  bug-fixes for scm and 3720"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: implement hotplug notifications
  s390/scm_block: do not hide eadm subchannel dependency
  s390/sclp: Consolidate early sclp init calls to sclp_early_detect()
  s390/sclp: Move early code from sclp_cmd.c to sclp_early.c
  s390/sclp: Determine HSA size dynamically for zfcpdump
  s390/sclp: Move declarations for sclp_sdias into separate header file
  s390/pci: implement pcibios_remove_bus
  s390/pci: improve handling of bus resources
  s390/3270: fix missing device_destroy() call
  s390/boot: Install bzImage as default kernel image

Pull UML changes from Richard Weinberger:
 "This pile contains a nice defconfig cleanup, a rewritten stack
  unwinder and various cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Remove unused declarations from <as-layout.h>
  um: remove used STDIO_CONSOLE Kconfig param
  um/vdso: add .gitignore for a couple of targets
  arch/um: make it work with defconfig and x86_64
  um: Make kstack_depth_to_print conform to arch/x86
  um: Get rid of thread_struct->saved_task
  um: Make stack trace reliable against kernel mode faults
  um: Rewrite show_stack()

Pull x86 fix from Ingo Molnar:
 "A modular build fix for certain .config's"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Export 'boot_cpu_physical_apicid' to modules

Pull irq cleanups from Ingo Molnar:
 "This is a multi-arch cleanup series from Thomas Gleixner, which we
  kept to near the end of the merge window, to not interfere with
  architecture updates.

  This series (motivated by the -rt kernel) unifies more aspects of IRQ
  handling and generalizes PREEMPT_ACTIVE"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Make PREEMPT_ACTIVE generic
  sparc: Use preempt_schedule_irq
  ia64: Use preempt_schedule_irq
  m32r: Use preempt_schedule_irq
  hardirq: Make hardirq bits generic
  m68k: Simplify low level interrupt handling code
  genirq: Prevent spurious detection for unconditionally polled interrupts

Once we'd freed m->buf, m->count should become zero - we have no valid
contents reachable via m->buf.
Reported-by: NCharley (Hao Chuan) Chu <charley.chu@broadcom.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull watchdog changes from Wim Van Sebroeck:
 - addition of MOXA ART watchdog driver (moxart_wdt)
 - addition of CSR SiRFprimaII and SiRFatlasVI watchdog driver
   (sirfsoc_wdt)
 - addition of ralink watchdog driver (rt2880_wdt)
 - various fixes and cleanups (__user annotation, ioctl return codes,
   removal of redundant of_match_ptr, removal of unnecessary
   amba_set_drvdata(), use allocated buffer for usb_control_msg, ...)
 - removal of MODULE_ALIAS_MISCDEV statements
 - watchdog related DT bindings
 - first set of improvements on the w83627hf_wdt driver

* git://www.linux-watchdog.org/linux-watchdog: (26 commits)
  watchdog: w83627hf: Use helper functions to access superio registers
  watchdog: w83627hf: Enable watchdog device only if not already enabled
  watchdog: w83627hf: Enable watchdog only once
  watchdog: w83627hf: Convert to watchdog infrastructure
  watchdog: omap_wdt: raw read and write endian fix
  watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE
  watchdog: pcwd_usb: overflow in usb_pcwd_send_command()
  watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe()
  watchdog: watchdog_core: Fix a trivial typo
  watchdog: dw: Enable OF support for DW watchdog timer
  watchdog: Get rid of MODULE_ALIAS_MISCDEV statements
  watchdog: ts72xx_wdt: Propagate return value from timeout_to_regval
  watchdog: pcwd_usb: Use allocated buffer for usb_control_msg
  watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata()
  watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI
  watchdog: Remove redundant of_match_ptr
  watchdog: ts72xx_wdt: cleanup return codes in ioctl
  documentation/devicetree: Move DT bindings from gpio to watchdog
  watchdog: add ralink watchdog driver
  watchdog: Add MOXA ART watchdog driver
  ...

Pull i2c changes from Wolfram Sang:
 - new drivers for exynos5, bcm kona, and st micro
 - bigger overhauls for drivers mxs and rcar
 - typical driver bugfixes, cleanups, improvements
 - got rid of the superfluous 'driver' member in i2c_client struct This
   touches a few drivers in other subsystems.  All acked.

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()
  i2c: i2c-eg20t: do not print error message in syslog if no ACK received
  i2c: bcm-kona: Introduce Broadcom I2C Driver
  i2c: cbus-gpio: Fix device tree binding
  i2c: wmt: add missing clk_disable_unprepare() on error
  i2c: designware: add new ACPI IDs
  i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
  i2c: exynos5: Remove incorrect clk_disable_unprepare
  i2c: i2c-st: Add ST I2C controller
  i2c: exynos5: add High Speed I2C controller driver
  i2c: rcar: fixup rcar type naming
  i2c: scmi: remove some bogus NULL checks
  i2c: sh_mobile & rcar: Enable the driver on all ARM platforms
  i2c: sh_mobile: Convert to clk_prepare/unprepare
  i2c: mux: gpio: use reg value for i2c_add_mux_adapter
  i2c: mux: gpio: use gpio_set_value_cansleep()
  i2c: Include linux/of.h header
  i2c: mxs: Fix PIO mode on i.MX23
  i2c: mxs: Rework the PIO mode operation
  i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller
  ...

Pull infiniband/rdma updates from Roland Dreier:
 - Re-enable flow steering verbs with new improved userspace ABI
 - Fixes for slow connection due to GID lookup scalability
 - IPoIB fixes
 - Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
 - Further improvements to SRP error handling
 - Add new transport type for Cisco usNIC

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
  IB/core: Re-enable create_flow/destroy_flow uverbs
  IB/core: extended command: an improved infrastructure for uverbs commands
  IB/core: Remove ib_uverbs_flow_spec structure from userspace
  IB/core: Use a common header for uverbs flow_specs
  IB/core: Make uverbs flow structure use names like verbs ones
  IB/core: Rename 'flow' structs to match other uverbs structs
  IB/core: clarify overflow/underflow checks on ib_create/destroy_flow
  IB/ucma: Convert use of typedef ctl_table to struct ctl_table
  IB/cm: Convert to using idr_alloc_cyclic()
  IB/mlx5: Fix page shift in create CQ for userspace
  IB/mlx4: Fix device max capabilities check
  IB/mlx5: Fix list_del of empty list
  IB/mlx5: Remove dead code
  IB/core: Encorce MR access rights rules on kernel consumers
  IB/mlx4: Fix endless loop in resize CQ
  RDMA/cma: Remove unused argument and minor dead code
  RDMA/ucma: Discard events for IDs not yet claimed by user space
  IB/core: Add Cisco usNIC rdma node and transport types
  RDMA/nes: Remove self-assignment from nes_query_qp()
  IB/srp: Report receive errors correctly
  ...

Pull battery updates from Anton Vorontsov:
 "Highlights:
   - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia.
   - Device tree bindings for TWL4030 chips.
   - Random fixes and cleanups"

* tag 'for-v3.13' of git://git.infradead.org/battery-2.6:
  pm2301-charger: Remove unneeded NULL checks
  twl4030_charger: Add devicetree support
  power_supply: Fix documentation for TEMP_*ALERT* properties
  max17042_battery: Support regmap to access device's registers
  max17042_battery: Use SIMPLE_DEV_PM_OPS
  charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code
  bq2415x_charger: Fix max battery regulation voltage
  tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code
  tps65090-charger: Drop devm_free_irq of devm_ allocated irq
  power_supply: Add support for bq24735 charger
  pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt
  pm2301-charger: Check return value of regulator_enable
  ab8500-charger: Remove redundant break
  ab8500-charger: Check return value of regulator_enable
  isp1704_charger: Fix driver to work with changes introduced in v3.5

Merge branch 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media build fixes from Mauro Carvalho Chehab:
 "A series of patches that fix compilation on non-x86 archs.

  While most of them are just build fixes, there are some fixes for real
  bugs, as there are a number of drivers using dynamic stack allocation.
  A few of those might be considered a security risk, if the i2c-dev
  module is loaded, as someone could be sending very long I2C data that
  could potentially overflow the Kernel stack.  Ok, as using /dev/i2c-*
  devnodes usually requires root on usual distros, and exploiting it
  would require a DVB board or USB stick, the risk is not high"

* 'topic/kbuild-fixes-for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (28 commits)
  [media] platform drivers: Fix build on frv arch
  [media] lirc_zilog: Don't use dynamic static allocation
  [media] mxl111sf: Don't use dynamic static allocation
  [media] af9035: Don't use dynamic static allocation
  [media] af9015: Don't use dynamic static allocation
  [media] dw2102: Don't use dynamic static allocation
  [media] dibusb-common: Don't use dynamic static allocation
  [media] cxusb: Don't use dynamic static allocation
  [media] v4l2-async: Don't use dynamic static allocation
  [media] cimax2: Don't use dynamic static allocation
  [media] tuner-xc2028: Don't use dynamic static allocation
  [media] tuners: Don't use dynamic static allocation
  [media] av7110_hw: Don't use dynamic static allocation
  [media] stv090x: Don't use dynamic static allocation
  [media] stv0367: Don't use dynamic static allocation
  [media] stb0899_drv: Don't use dynamic static allocation
  [media] dvb-frontends: Don't use dynamic static allocation
  [media] dvb-frontends: Don't use dynamic static allocation
  [media] s5h1420: Don't use dynamic static allocation
  [media] uvc/lirc_serial: Fix some warnings on parisc arch
  ...

After merging the final tree, today's linux-next build (sparc64 defconfig)
failed like this:

arch/sparc/mm/init_64.c: In function 'pte_alloc_one':
arch/sparc/mm/init_64.c:2568:9: error: unused variable 'pte' [-Werror=unused-variable]

Caused by the merge between commit 37b3a8ff ("sparc64: Move from 4MB
to 8MB huge pages") and commit 1ae9ae5f ("sparc: handle
pgtable_page_ctor() fail") (I had the following merge fix in linux-next,
but it didn't seem to propagate upstream - may have forgotten to point it
out :-().
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull media updates from Mauro Carvalho Chehab:
 "This series include:
   - a new Remote Controller driver for ST SoC with the corresponding DT
     bindings
   - a new frontend (cx24117)
   - a new I2C camera flash driver (lm3560)
   - a new mem2mem driver for TI SoC (ti-vpe)
   - support for Raphael r828d added to r820t driver
   - some improvements on buffer allocation at VB2 core
   - usual driver fixes and improvements

  PS this time, we have a smaller number of patches.  While it is hard
  to pinpoint to the reasons, I believe that it is mainly due to:

   1) there are several patch series ready, but depending on DT review.
      I decided to grant some extra time for DT maintainers to look on
      it, as they're expecting to have more time with the changes agreed
      during ARM mini-summit and KS.  If they can't review in time for
      3.14, I'll review myself and apply for the next merge window.

   2) I suspect that having both LinuxCon EU and LinuxCon NA happening
      during the same merge window affected the development
      productivity, as several core media developers participated on
      both events"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits)
  [media] media: st-rc: Add ST remote control driver
  [media] gpio-ir-recv: Include linux/of.h header
  [media] tvp7002: Include linux/of.h header
  [media] tvp514x: Include linux/of.h header
  [media] ths8200: Include linux/of.h header
  [media] adv7343: Include linux/of.h header
  [media] v4l: Fix typo in v4l2_subdev_get_try_crop()
  [media] media: i2c: add driver for dual LED Flash, lm3560
  [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2
  [media] rtl28xxu: add RTL2832P + R828D support
  [media] rtl2832: add new tuner R828D
  [media] r820t: add support for R828D
  [media] media/i2c: ths8200: fix build failure with gcc 4.5.4
  [media] Add support for KWorld UB435-Q V2
  [media] staging/media: fix msi3101 build errors
  [media] ddbridge: Remove casting the return value which is a void pointer
  [media] ngene: Remove casting the return value which is a void pointer
  [media] dm1105: remove unneeded not-null test
  [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED
  [media] media: rcar_vin: Add preliminary r8a7790 support
  ...

Commit ea1e7ed3 triggers build regression on sparc64.

include/linux/mm.h:1391:2: error: implicit declaration of function 'pgtable_cache_init' [-Werror=implicit-function-declaration]
arch/sparc/include/asm/pgtable_64.h:978:13: error: conflicting types for 'pgtable_cache_init' [-Werror]

It happens due headers include loop:

<linux/mm.h> -> <asm/pgtable.h> -> <asm/pgtable_64.h> ->
	<asm/tlbflush.h> -> <asm/tlbflush_64.h> -> <linux/mm.h>

Let's drop <linux/mm.h> include from asm/tlbflush_64.h.
Build tested with allmodconfig.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull EDAC driver updates from Mauro Carvalho Chehab:
 - sb_edac: add support for Ivy Bridge support
 - cell_edac: add a missing of_node_put() call

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  cell_edac: fix missing of_node_put
  sb_edac: add support for Ivy Bridge
  sb_edac: avoid decoding the same error multiple times
  sb_edac: rename mci_bind_devs()
  sb_edac: enable multiple PCI id tables to be used
  sb_edac: rework sad_pkg
  sb_edac: allow different interleave lists
  sb_edac: allow different dram_rule arrays
  sb_edac: isolate TOHM retrieval
  sb_edac: rename pci_br
  sb_edac: isolate TOLM retrieval
  sb_edac: make RANK_CFG_A value part of sbridge_info

Pull EDAC updates from Borislav Petkov:
 "Following up on last week's discussion, here's my part of the EDAC
  pile, highlights in the signed tag.

  The last two patches have a date from just now because I've just
  applied them to the tree after Johannes sent them to me earlier.  I
  decided to forward them now because they're trivial.

  There's a third one for MPC85xx which adds PCIe error interrupt
  support but since it is not so trivial and hasn't seen any linux-next
  time, I'm deferring it to 3.14

  EDAC update highlights:
   - Support for Calxeda ECX-2000 memory controller, from Robert Richter
   - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob
     Herring and Robert Richter
   - New maintainer for Freescale's MPC85xx EDAC driver: Johannes
     Thumshirn"

* tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac/85xx: Remove mpc85xx_pci_err_remove
  EDAC: Add edac-mpc85xx driver to MAINTAINERS
  edac, highbank: Moving error injection to sysfs for edac
  edac, highbank: Add MAINTAINERS entry
  edac: Unify reporting of device info for device, mc and pci
  edac, highbank: Improve and unify naming
  edac, highbank: Add Calxeda ECX-2000 support
  ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
  edac, highbank: Fix interrupt setup of mem and l2 controller