The KVM PSCI code blindly assumes that vcpu_id and MPIDR are
the same thing. This is true when vcpus are organized as a flat
topology, but is wrong when trying to emulate any other topology
(such as A15 clusters).

Change the KVM PSCI CPU_ON code to look at the MPIDR instead
of the vcpu_id to pick a target CPU.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Now that the KVM/arm code knows about affinity, remove the hard
limit of 4 vcpus per VM.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The L2CTLR register contains the number of CPUs in this cluster.

Make sure the register content is actually relevant to the vcpu
that is being configured by computing the number of cores that are
part of its cluster.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

In order to be able to support more than 4 A7 or A15 CPUs,
we need to fix the MPIDR computing to reflect the fact that
both A15 and A7 can only exist in clusters of at most 4 CPUs.

Fix the MPIDR computing to allow virtual clusters to be exposed
to the guest.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Support transparent huge pages in KVM/ARM and KVM/ARM64.  The
transparent_hugepage_adjust is not very pretty, but this is also how
it's solved on x86 and seems to be simply an artifact on how THPs
behave.  This should eventually be shared across architectures if
possible, but that can always be changed down the road.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Support huge pages in KVM/ARM and KVM/ARM64.  The pud_huge checking on
the unmap path may feel a bit silly as the pud_huge check is always
defined to false, but the compiler should be smart about this.

Note: This deals only with VMAs marked as huge which are allocated by
users through hugetlbfs only.  Transparent huge pages can only be
detected by looking at the underlying pages (or the page tables
themselves) and this patch so far simply maps these on a page-by-page
level in the Stage-2 page tables.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Update comments to reflect what is really going on and add the TWE bit
to the comments in kvm_arm.h.

Also renames the function to kvm_handle_wfx like is done on arm64 for
consistency and uber-correctness.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

On an (even slightly) oversubscribed system, spinlocks are quickly
becoming a bottleneck, as some vcpus are spinning, waiting for a
lock to be released, while the vcpu holding the lock may not be
running at all.

This creates contention, and the observed slowdown is 40x for
hackbench. No, this isn't a typo.

The solution is to trap blocking WFEs and tell KVM that we're
now spinning. This ensures that other vpus will get a scheduling
boost, allowing the lock to be released more quickly. Also, using
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance
when the VM is severely overcommited.

Quick test to estimate the performance: hackbench 1 process 1000

2xA15 host (baseline):	1.843s

2xA15 guest w/o patch:	2.083s
4xA15 guest w/o patch:	80.212s
8xA15 guest w/o patch:	Could not be bothered to find out

2xA15 guest w/ patch:	2.102s
4xA15 guest w/ patch:	3.205s
8xA15 guest w/ patch:	6.887s

So we go from a 40x degradation to 1.5x in the 2x overcommit case,
which is vaguely more acceptable.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Updates for KVM/ARM including cpu=host and Cortex-A7 support

Update comments to reflect what is really going on and add the TWE bit
to the comments in kvm_arm.h.

Also renames the function to kvm_handle_wfx like is done on arm64 for
consistency and uber-correctness.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

On an (even slightly) oversubscribed system, spinlocks are quickly
becoming a bottleneck, as some vcpus are spinning, waiting for a
lock to be released, while the vcpu holding the lock may not be
running at all.

This creates contention, and the observed slowdown is 40x for
hackbench. No, this isn't a typo.

The solution is to trap blocking WFEs and tell KVM that we're
now spinning. This ensures that other vpus will get a scheduling
boost, allowing the lock to be released more quickly. Also, using
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance
when the VM is severely overcommited.

Quick test to estimate the performance: hackbench 1 process 1000

2xA15 host (baseline):	1.843s

2xA15 guest w/o patch:	2.083s
4xA15 guest w/o patch:	80.212s
8xA15 guest w/o patch:	Could not be bothered to find out

2xA15 guest w/ patch:	2.102s
4xA15 guest w/ patch:	3.205s
8xA15 guest w/ patch:	6.887s

So we go from a 40x degradation to 1.5x in the 2x overcommit case,
which is vaguely more acceptable.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Some strange character leaped into the documentation, which makes
git-send-email behave quite strangely.  Get rid of this before it bites
anyone else.

Cc: Anup Patel <anup.patel@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Page pinning is not mandatory in kvm async page fault processing since
after async page fault event is delivered to a guest it accesses page once
again and does its own GUP.  Drop the FOLL_GET flag in GUP in async_pf
code, and do some simplifying in check/clear processing.
Suggested-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NGu zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Nchai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The KVM_HPAGE_DEFINES are a little artificial on ARM, since the huge
page size is statically defined at compile time and there is only a
single huge page size.

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The gfn_to_index function relies on huge page defines which either may
not make sense on systems that don't support huge pages or are defined
in an unconvenient way for other architectures.  Since this is
x86-specific, move the function to arch/x86/include/asm/kvm_host.h.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This patch adds support for running Cortex-A7 guests on Cortex-A7 hosts.

As Cortex-A7 is architecturally compatible with A15, this patch is largely just
generalising existing code. Areas where 'implementation defined' behaviour
is identical for A7 and A15 is moved to allow it to be used by both cores.

The check to ensure that coprocessor register tables are sorted correctly is
also moved in to 'common' code to avoid each new cpu doing its own check
(and possibly forgetting to do so!)
Signed-off-by: NJonathan Austin <jonathan.austin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

The T{0,1}SZ fields of TTBCR are 3 bits wide when using the long descriptor
format. Likewise, the T0SZ field of the HTCR is 3-bits. KVM currently
defines TTBCR_T{0,1}SZ as 3, not 7.

The T0SZ mask is used to calculate the value for the HTCR, both to pick out
TTBCR.T0SZ and mask off the equivalent field in the HTCR during
read-modify-write. The incorrect mask size causes the (UNKNOWN) reset value
of HTCR.T0SZ to leak in to the calculated HTCR value. Linux will hang when
initializing KVM if HTCR's reset value has bit 2 set (sometimes the case on
A7/TC2)

Fixing T0SZ allows A7 cores to boot and T1SZ is also fixed for completeness.
Signed-off-by: NJonathan Austin <jonathan.austin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

KVM does not have a notion of multiple clusters for CPUs, just a linear
array of CPUs. When using a system with cores in more than one cluster, the
current method for calculating the virtual MPIDR will leak the (physical)
cluster information into the virtual MPIDR. One effect of this is that
Linux under KVM fails to boot multiple CPUs that aren't in the 0th cluster.

This patch does away with exposing the real MPIDR fields in favour of simply
using the virtual CPU number (but preserving the U bit, as before).
Signed-off-by: NJonathan Austin <jonathan.austin@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch contains the following two changes:
1. Fix the bug in nested preemption timer support. If vmexit L2->L0
with some reasons not emulated by L1, preemption timer value should
be save in such exits.
2. Add support of "Save VMX-preemption timer value" VM-Exit controls
to nVMX.

With this patch, nested VMX preemption timer features are fully
supported.
Signed-off-by: NArthur Chunqi Li <yzt356@gmail.com>
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_mmu initialization is mostly filling in function pointers, there is
no way for it to fail.  Clean up unused return values.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

They do the same thing, and destroy_kvm_mmu can be confused with
kvm_mmu_destroy.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The new_cr3 MMU callback has been a wrapper for mmu_free_roots since commit
e676505a (KVM: MMU: Force cr3 reload with two dimensional paging on mov
cr3 emulation, 2012-07-08).

The commit message mentioned that "mmu_free_roots() is somewhat of an overkill,
but fixing that is more complicated and will be done after this minimal fix".
One year has passed, and no one really felt the need to do a different fix.
Wrap the call with a kvm_mmu_new_cr3 function for clarity, but remove the
callback.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The free MMU callback has been a wrapper for mmu_free_roots since mmu_free_roots
itself was introduced (commit 17ac10ad, [PATCH] KVM: MU: Special treatment
for shadow pae root pages, 2007-01-05), and has always been the same for all
MMU cases.  Remove the indirection as it is useless.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

This makes the interface more deterministic for userspace, which can expect
(after configuring only the features it supports) to get exactly the same
state from the kernel, independent of the host CPU and kernel version.
Suggested-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

A guest can still attempt to save and restore XSAVE states even if they
have been masked in CPUID leaf 0Dh.  This usually is not visible to
the guest, but is still wrong: "Any attempt to set a reserved bit (as
determined by the contents of EAX and EDX after executing CPUID with
EAX=0DH, ECX= 0H) in XCR0 for a given processor will result in a #GP
exception".

The patch also performs the same checks as __kvm_set_xcr in KVM_SET_XSAVE.
This catches migration from newer to older kernel/processor before the
guest starts running.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

XSAVE entries that KVM does not support are reported by
KVM_GET_SUPPORTED_CPUID for leaf 0Dh index 0 if the host supports them;
they should be left out unless there is also hypervisor support for them.

Sub-leafs are correctly handled in supported_xcr0_bit, fix index 0
to match.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

When KVM (de)assigns PCI(e) devices to VMs, a debug message is printed
including the BDF notation of the respective device. Currently, the BDF
notation does not have the commonly used leading zeros. This produces
messages like "assign device 0:1:8.0", which look strange at first sight.

The patch fixes this by exchanging the printk(KERN_DEBUG ...) with dev_info()
and also inserts "kvm" into the debug message, so that it is obvious where
the message comes from. Also reduces LoC.
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAndre Richter <andre.o.richter@gmail.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

To implement CPU=Host we have added KVM_ARM_PREFERRED_TARGET
vm ioctl which provides information to user space required for
creating VCPU matching underlying Host.

This patch adds info related to this new KVM_ARM_PREFERRED_TARGET
vm ioctl in the KVM API documentation.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

For implementing CPU=host, we need a mechanism for querying
preferred VCPU target type on underlying Host.

This patch implements KVM_ARM_PREFERRED_TARGET vm ioctl which
returns struct kvm_vcpu_init instance containing information
about preferred VCPU target type and target specific features
available for it.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch implements kvm_vcpu_preferred_target() function for
KVM ARM64 which will help us implement KVM_ARM_PREFERRED_TARGET
ioctl for user space.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

This patch implements kvm_vcpu_preferred_target() function for
KVM ARM which will help us implement KVM_ARM_PREFERRED_TARGET ioctl
for user space.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Very minor typo in comments of inject_abt() when we update fault status
register for injecting prefetch abort.
Signed-off-by: NAnup Patel <anup.patel@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

In commit e935b837 ("KVM: Convert kvm_lock to raw_spinlock"),
the kvm_lock was made a raw lock.  However, the kvm mmu_shrink()
function tries to grab the (non-raw) mmu_lock within the scope of
the raw locked kvm_lock being held.  This leads to the following:

BUG: sleeping function called from invalid context at kernel/rtmutex.c:659
in_atomic(): 1, irqs_disabled(): 0, pid: 55, name: kswapd0
Preemption disabled at:[<ffffffffa0376eac>] mmu_shrink+0x5c/0x1b0 [kvm]

Pid: 55, comm: kswapd0 Not tainted 3.4.34_preempt-rt
Call Trace:
 [<ffffffff8106f2ad>] __might_sleep+0xfd/0x160
 [<ffffffff817d8d64>] rt_spin_lock+0x24/0x50
 [<ffffffffa0376f3c>] mmu_shrink+0xec/0x1b0 [kvm]
 [<ffffffff8111455d>] shrink_slab+0x17d/0x3a0
 [<ffffffff81151f00>] ? mem_cgroup_iter+0x130/0x260
 [<ffffffff8111824a>] balance_pgdat+0x54a/0x730
 [<ffffffff8111fe47>] ? set_pgdat_percpu_threshold+0xa7/0xd0
 [<ffffffff811185bf>] kswapd+0x18f/0x490
 [<ffffffff81070961>] ? get_parent_ip+0x11/0x50
 [<ffffffff81061970>] ? __init_waitqueue_head+0x50/0x50
 [<ffffffff81118430>] ? balance_pgdat+0x730/0x730
 [<ffffffff81060d2b>] kthread+0xdb/0xe0
 [<ffffffff8106e122>] ? finish_task_switch+0x52/0x100
 [<ffffffff817e1e94>] kernel_thread_helper+0x4/0x10
 [<ffffffff81060c50>] ? __init_kthread_worker+0x

After the previous patch, kvm_lock need not be a raw spinlock anymore,
so change it back.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>