Seem like quite a few splipped through the cracks.  Here's a patch to
update all references I could find:
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

bump version to 3.04.01
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* removing obsolete 1066, 1066E from Kconfig
* initializing aen_event_read_flag after host reset
* remove oem references
* remove obsolete mpt_pq_filter command line option
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix's to insure download boot could occur when
either channel of 1030 is reset. Necessary in order
for onboard controller in flashless environment
to become operational.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix's to insure proper status is returned to midlayer
when a task abort failed to be aborted by controller
firmware.

Also sanity checks to prevent scsi cmd from being
double completed during error recovery.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

sas nexus loss support for systems that suport failover.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Adding more sas loginfo strings.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix panic for when mptctl is loading at the same time
when one of the fusion llds (mptsas/mptfc/mptspi) is loading.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Adding support for sas enclosures with smart drives.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Apparently the D700 has had an argument ordering issue for quite a while
which can cause it to get the wrong scsi_id (I just got an unbootable
voyager system because of this).  Hopefully this patch also fixes up all
the sectional mismatches within the driver.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Check all __must_check warnings in scsi_debug.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Using the port_id for the channel is completely unnecessary since the
host_id/target_id are constructed to be globally unique.  Also move
the mptsas driver on to virtual channel 1 for its raid devices.
Acked-by: N"Moore, Eric" <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch adds the ability to add a backlink to a particular port.  The
idea is to represent properly ports on expanders that are used
specifically for linking to the parent device in the topology.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Currently struct scsi_cmnd has various fields that are used to backup
original data after the corresponding fields have been overridden for
EH commands.  This means drivers can easily get at it and misuse it.
Due to the old_ naming this doesn't happen for most of them, but two
that have different names have been used wrong a lot (see previous
patch).  Another downside is that they unessecarily bloat the scsi_cmnd
size.

This patch moves them onstack in scsi_send_eh_cmnd to fix those two
issues aswell as allowing future EH fixes like moving the EH command
submissions to use SG lists like everything else.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Without this patch we register an interrupt with request_irq,
but then return a bad return code from the module probe.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Allocate the correct number of lp events when running
ibmvscsi on legacy iseries
Signed-off-by: NDave Boutcher <sleddog@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove last vestiges of the reverse_scan paramater from aic7xxx and aic79xx.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Stop poking into the old_ & co scsi_cmnd fields that should only be used
in the EH code.  Untested, but this is required to move ahead with the
EH fixes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Convert this:
st0: Error with sense data: <6>st: Current: sense key: Illegal Request
    Additional sense: Invalid field in cdb

To this:
st0: Current: sense key: Illegal Request
    Additional sense: Invalid field in cdb
Signed-off-by: NLuben Tuikov <ltuikov@yahoo.com>
Acked-by: NKai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Change version number to 8.1.7
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Misc Fixes:
 - Fix some sparse warnings - casts of address space
 - Fix handling of the adapter registration string. Each invocation
   was byteswapping, so every other adapter init attempt failed.
 - Correct comments and default value for the lpfc_max_luns parameter
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Add lpfc_sli_flush_mbox_queue() function and use it in lpfc_offline() call
to avoid deadlock on thread block.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Correct the wait in attachment that delays for topology discovery
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove depricated sysfs attribute board_online, as it's replaced by the new
issue_reset attribute
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Adding new issue_reset sysfs attribute
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix panic in lpfc_sli_validate_fcp_iocb due to access of scsi_cmnd after
returning it to the midlayer
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Consolidate dma buf cleanup into a separate function
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Correct bogus nodev_tmo message on NPort that changes its NPort Id
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix txcmplq related panics on heavy IO while downloading firmware
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Issue DOWN_LINK prior to INIT_LINK to work around link failure issue
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fixed infinite retry of REG_LOGIN mailbox failed due to MBXERR_RPI_FULL
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix memory leak and cleanup code related to per ring lookup array.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Standardize the driver on a single define for the maximum supported targets.
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Use mod_timer instead of add_timer in lpfc_els_timeout_handler

This patch was formerly posted by Mark Haverkamp.
http://marc.theaimsgroup.com/?l=linux-scsi&m=114246089015681&w=2Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Smart <James.Smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This allows us to be rid of the machinery in mptsas for creating and
tracking port numbers.  Since mptsas is merely inventing the numbers,
the SAS transport class may as well do it instead.
Signed-off-by: NEric Moore <Eric.Moore@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Following on from my post titled: "additional sense codes
need update" see the attachment against lk 2.6.17 .

ChangeLog:
  - update additional sense codes table to agree with
    SPC-4 revision 5a  (14 June 2006)
  - adjust some of the opcode names
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Some SAS HBAs don't want to go to the trouble of tracking port numbers,
so they'd simply like to say "add this port and give it a number".
This is especially beneficial from the hotplug point of view, since
tracking ports and the available number space can be a real pain.

The current implementation uses an incrementing number per expander to
add the port on.  However, since there can never be more ports than
there are phys, a later implementation will try to be more intelligent
about this.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch makes a needlessly global function static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Use "+m" rather than a combination of "=m" and "m" for improved clarity
and consistency.

This also fixes some inlines that incorrectly didn't tell the compiler
that they read the old value at all, potentially causing the compiler to
generate bogus code.  It appear that all of those potential bugs were
hidden by the use of extra "volatile" specifiers on the data structures
in question, though.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use "+m" rather than a combination of "=m" and "m" for improved
clarity and consistency.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>