This patch (as1658) cleans up the usage of qh_completions() in
ehci-hcd.  Currently the function's return value indicates whether any
URBs were given back; the idea was that the caller can scan the QH
over again to handle any URBs that were dequeued by a completion
handler.  This is not necessary; when qh_completions() is ready to
give back dequeued URBs, it does its own rescanning.

Therefore the new return value will be a flag indicating whether the
caller needs to unlink the QH.  This is more convenient than forcing
the caller to check qh->needs_rescan, and it makes a lot more sense --
why should "needs_rescan" imply that an unlink is needed?  The callers
are also changed to remove the unneeded rescans.

Lastly, the check for whether qh->qtd_list is non-empty is removed
from the start of qh_completions().  Two of the callers have to make
this test anyway, so the same test can simply be added to the other
two callers.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1638) makes several changes to the ehci-hcd driver, all
related to the qh_refresh() function.  This function must be called
whenever an idle QH gets linked back into either the async or the
periodic schedule.

	Change a BUG_ON() in the qh_update routine to a WARN_ON().
	Since this code runs in atomic context, a BUG_ON() would
	immediately freeze the whole system.

	Remove two unneeded calls to qh_refresh(), one when a QH is
	initialized and one when a QH becomes idle.  Adjust the
	adjacent comments accordingly.

	Move the qh_refresh() and qh_link_periodic() calls for new
	interrupt URBs to after the new TDs have been added.

	As a result of the previous two changes, qh_refresh() is never
	called when the qtd_list is empty.  The corresponding check in
	qh_refresh() can be removed, along with an indentation level.

These changes should not cause any alteration of behavior.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In skel_read,the reader blocked in wait_for_completion before submit
bulk in urb.
Using processed_urb is for retaining the completion in the case that
previous interruptible wait in skel_read was interrupted and complete
before next skel_read.  Replacing completion with waitqueue can avoid
working around the counting nature of completions
and fix the bug.

Signed-off-by: Du Xing duxing2007@gmail.com
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Userspace applications need to know the maximum supported message
size.

The cdc-wdm driver translates between a character device stream
and a message based protocol.  Each message is transported as a
usb control message with no further encapsulation or syncronization.
Each read or write on the character device should translate to
exactly one usb control message to ensure that message boundaries
are kept intact.  That means that the userspace application must
know the maximum message size supported by the device and driver,
making this size a vital part of the cdc-wdm character device API.

CDC WDM and CDC MBIM functions export the maximum supported
message size through CDC functional descriptors.  The cdc-wdm and
cdc_mbim drivers will parse these descriptors and use the value
chosen by the device.  The only current way for a userspace
application to retrive the value is by duplicating the descriptor
parsing. This is an unnecessary complex task, and application
writers are likely to postpone it, using a fixed value and adding
a "todo" item.

QMI functions have no way to tell the host what message size they
support.  The qmi_wwan driver use a fixed value based on protocol
recommendations and observed device behaviour.  Userspace
applications must know and hard code the same value.  This scheme
will break if we ever encounter a QMI device needing a device
specific message size quirk.  We are currently unable to support
such a device because using a non default size would break the
implicit userspace API.

The message size is currently a hidden attribute of the cdc-wdm
userspace API.  Retrieving it is unnecessarily complex, increasing
the possibility of drivers and applications using different limits.
The resulting errors are hard to debug, and can only be replicated
on identical hardware.

Exporting the maximum message size from the driver simplifies the
task for the userspace application, and creates a unified
information source independent of device and function class. It also
serves to document that the message size is part of the cdc-wdm
userspace API.

This proposed API extension has been presented for the authors of
userspace applications and libraries using the current API: libmbim,
libqmi, uqmi, oFono and ModemManager.  The replies were:

Aleksander Morgado:
 "We do really need max message size for MBIM; and as you say, it may be
  good to have the max message size info also for QMI, so the new ioctl
  seems a good addition. So +1 from my side, for what it's worth."

Dan Williams:
 "Yeah, +1 here.  I'd prefer the sysfs file, but the fact that that
  doesn't work for fd passing pretty much kills it."

No negative replies are so far received.

Cc: Aleksander Morgado <aleksander@lanedo.com>
Cc: Dan Williams <dcbw@redhat.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Acked-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Return an error if hub->descriptor->bNbrPorts==0. Without this additional
check, we can end up doing a "hub->ports = kzalloc(0, GFP_KERNEL)".
This hub->ports pointer will therefore be non-NULL and will be used.
Example of dmesg:
   INIT: usb 1-1: New USB device found, idVendor=0424, idProduct=2512
   usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
   hub 1-1:1.0: USB hub found
   version 2.86 bootinghub 1-1:1.0: 0 ports detected
   Unable to handle kernel NULL pointer dereference at virtual address 00000010
Signed-off-by: NDavid Linares <dlinares.linux@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let system sleep go ahead further, so
this patch doesn't recover device under this situation.

Also add comments on this case.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let system sleep go ahead further, so
this patch doesn't recover device under this situation.

Also add comments on the case.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let system sleep go ahead further, so
this patch comments on the case and requires that both
usbnet_suspend() and subdriver->suspend() MUST return 0 in
system sleep context.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let system sleep go ahead further, so
this patch comments on the case and requires that both
usbnet_suspend() and subdriver->suspend() MUST return 0 in
system sleep context.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let the system sleep go ahead further, so this
patch doesn't recover device under this situation, otherwise
may cause resume() confused.
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If suspend callback fails in system sleep context, usb core will
ignore the failure and let system sleep go ahead further, so
this patch comments on the case and requires that serial->type->suspend()
MUST return 0 in system sleep context.
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds comments on interface driver suspend callback
to emphasize that the failure return value is ignored by
USB core in system sleep context, so do not try to recover
device for this case and let resume/reset_resume callback
handle the suspend failure if needed.

Also kerneldoc for usb_suspend_both() is updated with the
fact.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When KMS has parsed an EDID "detailed timing", it leaves the frame rate
zeroed.  Consecutive (debug-) output of that mode thus yields 0 for
vsync.  This simple fix also speeds up future invocations of
drm_mode_vrefresh().

While it is debatable whether this qualifies as a -stable fix I'd apply
it for consistency's sake; drm_helper_probe_single_connector_modes()
does the same thing already for all probed modes.

Cc: stable@vger.kernel.org
Signed-off-by: NTorsten Duwe <duwe@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

EDID spreads some values across multiple bytes; bit-fiddling is needed
to retrieve these.  The current code to parse "detailed timings" has a
cut&paste error that results in a vsync offset of at most 15 lines
instead of 63.

See

   http://en.wikipedia.org/wiki/EDID

and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why
that needs to be a left shift.

Cc: stable@vger.kernel.org
Signed-off-by: NTorsten Duwe <duwe@lst.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some revisions of AT91 SoCs, the RTC IMR register is not working.
Instead of elaborating a workaround for that specific SoC or IP version,
we simply use a software variable to store the Interrupt Mask Register
and modify it for each enabling/disabling of an interrupt.  The overhead
of this is negligible anyway.

The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5
sub-family of SoCs (good overview of the members here:
http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ).  The "user visible
effect" is the RTC doesn't work.

That sub-family is less than two years old and only has devicetree (DT)
support and came online circa lk 3.7 .  The dust is yet to settle on the
DT stuff at least for AT91 SoCs (translation: lots of stuff is still
broken, so much that it is hard to know where to start).

The fix in the patch is pretty simple: just shadow the silicon IMR
register with a variable in the driver.  Some older SoCs (pre-DT) use the
the rtc-at91rm9200 driver (e.g.  obviously the AT91RM9200) and they should
not be impacted by the change.  There shouldn't be a large volume of
interrupts associated with a RTC.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Reported-by: NDouglas Gilbert <dgilbert@interlog.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit be867814 ("drivers/video/ep93xx-fb.c: use devm_ functions")
introduced a build error:

  drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe':
  drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap'
  drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast

Include <linux/io.h> to pickup the declaration of 'devm_ioremap'.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: NRyan Mallon <rmallon@gmail.com>
Cc: Damien Cassou <damien.cassou@lifl.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the virtual irq since now MFD only handles virtual irq
Without this patch rtc device will fail in registration.

(akpm: Ashish has a different version whcih will be needed for 3.8.x and
earlier kernels)
Signed-off-by: NAshish <ashish.jangam@kpitcummins.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The AcpiMmioSel bit is bit 1 in the AcpiMmioEn register, but the current
sp5100_tco driver is using bit 2.

See 2.3.3 Power Management (PM) Registers page 150 of the
AMD SB800-Series Southbridges Register Reference Guide [1].

        AcpiMmioEn - RW – 8/16/32 bits - [PM_Reg: 24h]
        Field Name        Bits  Default  Description
        AcpiMMioDecodeEn  0     0b       Set to 1 to enable AcpiMMio space.
        AcpiMMIoSel       1     0b       Set AcpiMMio registers to be memory-mapped or IO-mapped space.
                                         0: Memory-mapped space
                                         1: I/O-mapped space

The sp5100_tco driver expects zero as a value of AcpiMmioSel (bit 1).

Fortunately, no problems were caused by this typo, because the default
value of the undocumented misused bit 2 seems to be zero.

However, the sp5100_tco driver should use the correct bitmask value.

[1] http://support.amd.com/us/Embedded_TechDocs/45482.pdfSigned-off-by: NTakahisa Tanaka <mc74hc00@gmail.com>
Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

A problem was found on PC's with the SB700 chipset: The PC fails to
load BIOS after running the 3.8.x kernel until the power is completely
cut off. It occurs in all 3.8.x versions and the mainline version as of
2/4. The issue does not occur with the 3.7.x builds.

There are two methods for accessing the watchdog registers.

 1. Re-programming a resource address obtained by allocate_resource()
to chipset.
 2. Use the direct memory-mapped IO access.

The method 1 can be used by all the chipsets (SP5100, SB7x0, SB8x0 or
later). However, experience shows that only PC with the SB8x0 (or
later) chipsets can use the method 2.

This patch removes the method 1, because the critical problem was found.
That's why the watchdog timer was able to be used on SP5100 and SB7x0
chipsets until now.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1116835
Link: https://lkml.org/lkml/2013/2/14/271Signed-off-by: NTakahisa Tanaka <mc74hc00@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

The LBA Range Type feature is optional in the NVMe specification,
so we should continue with adding namespaces for controllers that do
not implement this feature.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>

My old e-mail address is no longer working.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

This patch adds the iSMT SMBus Controller DeviceIDs for the Intel Avoton SOC.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

NVIDIA's Tegra SoC allows read/write of controller register only
if controller clock is enabled. System hangs if read/write happens
to registers without enabling clock.

clk_prepare_enable() can be fail due to unknown reason and hence
adding check for return value of this function. If this function
success then only access register otherwise return to caller with
error.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure waiting processes are woken on modem-status changes.

Currently processes are only woken on termios changes regardless of
whether the modem status has changed.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

When switching to tty ports, some lifetime assumptions were changed.
Specifically, close can now be called before the final tty reference is
dropped as part of hangup at device disconnect. Even with the ftdi
private-data refcounting this means that the port private data can be
freed while a process is sleeping on modem-status changes and thus
cannot be relied on to detect disconnects when woken up.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Also remove bogus test for private data pointer being NULL as it is
never assigned in the loop.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the port wait queue and make sure to check the serial disconnected
flag before accessing private port data after waking up.

This is is needed as the private port data (including the wait queue
itself) can be gone when waking up after a disconnect.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure the interface is not released before our serial device.

Note that drivers are still not allowed to access the interface in
any way that may interfere with another driver that may have gotten
bound to the same interface after disconnect returns.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>