- 27 1月, 2007 5 次提交
-
-
由 Avi Kivity 提交于
Check pte permission bits in walk_addr(), instead of scattering the checks all over the code. This has the following benefits: 1. We no longer set the accessed bit for accessed which fail permission checks. 2. Setting the accessed bit is simplified. 3. Under some circumstances, we used to pretend a page fault was fixed when it would actually fail the access checks. This caused an unnecessary vmexit. 4. The error code for guest page faults is now correct. The fix helps netbsd further along booting, and allows kvm to pass the new mmu testsuite. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Avi Kivity 提交于
This allows netbsd 3.1 i386 to get further along installing. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonard Norrgard 提交于
There's an obvious typo in svm_{get,set}_idt, causing it to access the ldt instead. Because these functions are only called for save/load on AMD, the bug does not impact normal operation. With the fix, save/load works as expected on AMD hosts. Signed-off-by: NUri Lublin <uril@qumranet.com> Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
In __writeback_single_inode(), when we find a locked inode and we're not doing a data-integrity sync, we used to just skip writing entirely, since we didn't want to wait for the inode to unlock. However, there's really no reason to skip writing the data pages, which are likely to be the the bulk of the dirty state anyway (and the main reason why writeback was started for the non-data-integrity case, of course!) Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Cc: Andrew Morton <akpm@osdl.org>, Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
It's not pretty, but it appears that ext3 with data=journal will clean pages without ever actually telling the VM that they are clean. This, in turn, will result in the VM (and balance_dirty_pages() in particular) to never realize that the pages got cleaned, and wait forever for an event that already happened. Technically, this seems to be a problem with ext3 itself, but it used to be hidden by 'try_to_free_buffers()' noticing this situation on its own, and just working around the filesystem problem. This commit re-instates that hack, in order to avoid a regression for the 2.6.20 release. This fixes bugzilla 7844: http://bugzilla.kernel.org/show_bug.cgi?id=7844 Peter Zijlstra points out that we should probably retain the debugging code that this removes from cancel_dirty_page(), and I agree, but for the imminent release we might as well just silence the warning too (since it's not a new bug: anything that triggers that warning has been around forever). Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: NJens Axboe <jens.axboe@oracle.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2007 1 次提交
-
-
由 Roland McGrath 提交于
On x86-64, a put_user call using a 64-bit pointer and a constant value that is > 0xffffffff will produce code that doesn't assemble. This patch fixes the asm construct to use the Z constraint for 32-bit constants. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 1月, 2007 13 次提交
-
-
由 Linus Torvalds 提交于
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix wrong checksum calculation on 64-bit MIPS [MIPS] VPE loader: Initialize lists before they're actually being used ... [MIPS] Fix reported amount of freed memory - it's in kB not bytes [MIPS] vr41xx: need one more nop with mtc0_tlbw_hazard() [MIPS] SMTC: Fix module build by exporting symbol [MIPS] SMTC: Fix TLB sizing bug for TLB of 64 >= entries [MIPS] Fix APM build [MIPS] There is no __GNUC_MAJOR__
-
由 Trond Myklebust 提交于
Prevent the call to invalidate_inode_pages2() from racing with file writes by taking the inode->i_mutex across the page cache flush and invalidate. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Trond Myklebust 提交于
Fix the Oops in http://bugzilla.linux-nfs.org/show_bug.cgi?id=138 We shouldn't be calling rpc_release_task() for tasks that are not active. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
The commit 8e3d8433 ([NET]: MIPS checksum annotations and cleanups) broke 64-bit MIPS. The problem is the commit replaces some unsigned long with __be32. On 64bit MIPS, a __be32 (i.e. unsigned int) value is represented as a sign-extented 32-bit value in a 64-bit argument register. So the address 192.168.0.1 (0xc0a80001) is passed as 0xffffffffc0a80001 to csum_tcpudp_nofold() but the asm code in the function expects 0x00000000c0a80001, therefore it returns a wrong checksum. Explicit cast to unsigned long is needed to drop high 32bit. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
kspd which due to makefile order happens to be initialized before the vpe loader causes references to vpecontrol lists before they're actually been initialized. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
While at it, change message on DEC for consistency. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
NEC VR4111 and VR4121 need one more nop with mtc0_tlbw_hazard(). Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Definitions for TIF_FREEZE and _TIF_FREEZE were missing. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexey Dobriyan 提交于
Gcc major version number is in __GNUC__. As side effect fix checking with sparse if sparse was built with gcc 4.1 and mips cross-compiler is 3.4. Sparse will inherit version 4.1, __GNUC__ won't be filtered from "-dM -E -xc" output, sparse will pick only new major, effectively becoming gcc version 3.1 which is unsupported. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix oops when Windows server sent bad domain name null terminator [CIFS] cifs sprintf fix [CIFS] Remove 2 unneeded kzalloc casts [CIFS] Update CIFS version number
-
- 24 1月, 2007 21 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (23 commits) [SCTP]: Fix compiler warning. [IP] TUNNEL: Fix to be built with user application. [IPV6]: Fixed the size of the netlink message notified by inet6_rt_notify(). [TCP]: rare bad TCP checksum with 2.6.19 [NET]: Process include/linux/if_{addr,link}.h with unifdef [NETFILTER]: Fix iptables ABI breakage on (at least) CRIS [IRDA] vlsi_ir.{h,c}: remove kernel 2.4 code [TCP]: skb is unexpectedly freed. [IPSEC]: Policy list disorder [IrDA]: Removed incorrect IRDA_ASSERT() [IrDA]: irda-usb TX path optimization (was Re: IrDA spams logfiles - since 2.6.19) [X.25]: Add missing sock_put in x25_receive_data [SCTP]: Fix SACK sequence during shutdown [SCTP]: Correctly handle unexpected INIT-ACK chunk. [SCTP]: Verify some mandatory parameters. [SCTP]: Set correct error cause value for missing parameters [NETFILTER]: fix xt_state compile failure [NETFILTER]: ctnetlink: fix leak in ctnetlink_create_conntrack error path [SELINUX]: increment flow cache genid [IPV6] MCAST: Fix joining all-node multicast group on device initialization. ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: mv643xx_eth: Fix race condition in mv643xx_eth_free_tx_descs s2io bogus memset
-
由 Jeff Garzik 提交于
-
由 Brian King 提交于
Initialize qc->pad_len for each new command. This ensures that pad_len is not set to a stale value for zero data length commands. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brian King 提交于
Fixup the inialization of qc->n_elem. It currently gets initialized to 1 for commands that do not transfer any data. Fix this by initializing n_elem to 0 and only setting to 1 in ata_scsi_qc_new when there is data to transfer. This fixes some problems seen with SATA devices attached to ipr adapters. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Some ATA/ATAPI devices act weirdly after the link is put into slumber mode. Some hang completely requiring physical power removal while others fail to wake up till the link is hardreset a couple of times. The addition of slumber on power down was never driven by real need. It just followed what ahci spec said literally. The spec itself seems faulty in that it doesn't consider devices (not controllers) which don't support link powersaving mode. Theory never matches reality when it comes to dark allys of cheap ATA/ATAPI world. It's just unrealistic to expect vendors to test rarely used link powersaving feature rigorously. This patch makes ahci more friendly to the coldness of reality. This shouldn't have any negative effect - when suspend operation succeeds, we power off the whole machine; otherwise, we wake up everything. I can't see any reason to be so elaborate with powering down the link in the first place. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Robert Hancock 提交于
Several people reported issues with certain drive commands timing out on sata_nv controllers running in ADMA mode. The commands in question were non-DMA-mapped commands, usually FLUSH CACHE or FLUSH CACHE EXT. From experimentation it appears that the NV_INT_DEV indication isn't always set when a legitimate command completion interrupt is received on a legacy-mode command, at least not on these controllers in ADMA mode. When a command is pending on the port, force the flag on always in the irq_stat value before calling nv_host_intr so that the drive busy state is always checked by ata_host_intr. This also fixes some questionable code in nv_host_intr which called ata_check_status when a command was pending and ata_host_intr returned "unhandled". If the device interrupted at just the wrong time this could cause interrupts to be lost. Signed-off-by: NRobert Hancock <hancockr@shaw.ca> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
As with JMicron controllers, ULi M5288 sets interface fatal error bit on device error including ATAPI CC. This makes libata hardreset the port on ATAPI CC thus making it impossible to use. Ignore interface fatal error bit on ULi M5288. This fixes bugzilla bug #7837. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brian Haley 提交于
> --- a/net/sctp/sm_statefuns.c > +++ b/net/sctp/sm_statefuns.c > @@ -462,24 +461,6 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep, > - if (!init_tag) { > - struct sctp_chunk *reply = sctp_make_abort(asoc, chunk, 0); > - if (!reply) > - goto nomem; This introduced a compiler warning, easily fixed. Signed-off-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
include/linux/if_tunnel.h is broken for user application because it was changed to use __be32 which is required to include linux/types.h in advance but didn't. (This issue is found when building MIPL2 daemon. We are not sure this is the last header to be fixed about __be32.) Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NTAKAMIYA Noriaki <takamiya@po.ntts.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Noriaki TAKAMIYA 提交于
I think the return value of rt6_nlmsg_size() should includes the amount of RTA_METRICS. Signed-off-by: NNoriaki TAKAMIYA <takamiya@po.ntts.co.jp> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
The patch "Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE" changed to unconditional copying of ip_summed field from collapsed skb. This patch reverts this change. The majority of substantial work including heavy testing and diagnosing by: Michael Tokarev <mjt@tls.msk.ru> Possible reasons pointed by: Herbert Xu and Patrick McHardy. Signed-off-by: NJarek Poplawski <jarkao2@o2.pl> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
After commit d3dcc077, include/linux/if_{addr,link}.h should be processed with unifdef. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Patrick McHardy 提交于
With the introduction of x_tables we accidentally broke compatibility by defining IPT_TABLE_MAXNAMELEN to XT_FUNCTION_MAXNAMELEN instead of XT_TABLE_MAXNAMELEN, which is two bytes larger. On most architectures it doesn't really matter since we don't have any tables with names that long in the kernel and the structure layout didn't change because of alignment requirements of following members. On CRIS however (and other architectures that don't align data) this changed the structure layout and thus broke compatibility with old iptables binaries. Changing it back will break compatibility with binaries compiled against recent kernels again, but since the breakage has only been there for three releases this seems like the better choice. Spotted by Jonas Berlin <xkr47@outerspace.dyndns.org>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch removes kernel 2.4 compatibility code. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masayuki Nakagawa 提交于
I encountered a kernel panic with my test program, which is a very simple IPv6 client-server program. The server side sets IPV6_RECVPKTINFO on a listening socket, and the client side just sends a message to the server. Then the kernel panic occurs on the server. (If you need the test program, please let me know. I can provide it.) This problem happens because a skb is forcibly freed in tcp_rcv_state_process(). When a socket in listening state(TCP_LISTEN) receives a syn packet, then tcp_v6_conn_request() will be called from tcp_rcv_state_process(). If the tcp_v6_conn_request() successfully returns, the skb would be discarded by __kfree_skb(). However, in case of a listening socket which was already set IPV6_RECVPKTINFO, an address of the skb will be stored in treq->pktopts and a ref count of the skb will be incremented in tcp_v6_conn_request(). But, even if the skb is still in use, the skb will be freed. Then someone still using the freed skb will cause the kernel panic. I suggest to use kfree_skb() instead of __kfree_skb(). Signed-off-by: NMasayuki Nakagawa <nakagawa.msy@ncos.nec.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The recent hashing introduced an off-by-one bug in policy list insertion. Instead of adding after the last entry with a lesser or equal priority, we're adding after the successor of that entry. This patch fixes this and also adds a warning if we detect a duplicate entry in the policy list. This should never happen due to this if clause. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Ortiz 提交于
With USB2.0 bulk out MTU can be 512 bytes, so checking it only for 64 bytes is incorrect. Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Ortiz 提交于
Since we stop using dev_alloc_skb on the IrDA TX frame, we constantly run into the case of the skb headroom being 0, and thus we call skb_cow for every IrDA TX frame. This patch uses a local buffer and memcpy the skb to it, saving us a kmalloc for each of those IrDA TX frames. Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Hendry 提交于
__x25_find_socket does a sock_hold. This adds a missing sock_put in x25_receive_data. Signed-off-by: NAndrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-