- 25 8月, 2017 34 次提交
-
-
由 Bodong Wang 提交于
Set the field to allow posting multi packet send WQEs if hardware supports this feature. This doesn't mean the send WQEs will be for multi packet unless the send WQE was prepared according to multi packet send WQE format. User space shall use flag MLX5_IB_ALLOW_MPW to check if hardware supports MPW and allows MPW in SQ context. Signed-off-by: NBodong Wang <bodong@mellanox.com> Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yishai Hadas 提交于
Set underlay QPN as part of flow rule when it's applicable. There is one root flow table in the NIC RX namespace and all the underlay QPs steer the traffic to this flow table. In order to prevent QP to get traffic which is not target to its underlay QP, we need to set the underlay QP number as part of the steering matching. Note: When multicast traffic is sent the QPN filtering is done by the firmware as some early step. Adding the QPN match on the flow table entry is wrong as by that time the target QPN holds the multicast address (e.g. FF(s)) and it won't match. Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ilya Lesokhin 提交于
Fix a bug where MR registration fails when mlx5_ib_cont_pages indicates that the MR can be mapped using 2GB pages (page_shift == 31). Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Kamal Heib 提交于
In clean_mr error path the 'mr' should be freed. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: NKamal Heib <kamalh@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ilya Lesokhin 提交于
mlx5 compatible devices have two ways of populating the MTT table of an MKEY: using a FW command and using a UMR WQE. A UMR is much faster, so it should be used whenever possible. Unfortunately the code today uses UMR only if the MKEY was allocated from the MR cache. Fix the code to use UMR even for MKEYs that were allocated using a FW command. Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ilya Lesokhin 提交于
This patch is the first step in decoupling UMR usage and allocation from the MR cache. The only functional change in this patch is to enables UMR for MRs created with reg_create. This change fixes a bug where ODP memory regions that were not allocated from the MR cache did not have UMR enabled. Signed-off-by: NIlya Lesokhin <ilyal@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Software parsing (SWP) is a feature that can be used to instruct the device to stop using its internal parser and to parse packets on the transmit path according to offsets set for each packets. Through this feature, the device allows the handling of checksum and LSO by the hardware according to the location of IP and TCP/UDP headers. Enable SW parsing on Raw Ethernet send queue by default if firmware supports it and report these capabilities to user space. Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
There is no need to explicitly zero parameters, because the structure requested to be filled already initialized to zeros. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The rdma_port_get_link_layer() returns enum rdma_link_layer as a return value, hence it is better to store the return value in specially annotated variable and not in int. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The mlx5_ib_get_vector_affinity() call is local to main.c file and there is no need to be declared globally visible. Fixes: 40b24403 ("mlx5: support ->get_vector_affinity") Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Kamal Heib 提交于
rxe_counter_name is used in rxe_hw_counters.c only. Make it static. Fixes: 0b1e5b99 ('IB/rxe: Add port protocol stats') Signed-off-by: NKamal Heib <kamalh@mellanox.com> Reviewed-by: NYonatan Cohen <yonatanc@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Erez Shitrit 提交于
In order to avoid deadlock between sysfs functions (like create/delete child) and remove_one (both of them are using the sysfs lock and rtnl_lock) the driver will use a state mutex for sync. That will fix traces as the following: schedule+0x3e/0x90 kernfs_drain+0x75/0xf0 ? wait_woken+0x90/0x90 __kernfs_remove+0x12e/0x1c0 kernfs_remove+0x25/0x40 sysfs_remove_dir+0x57/0x90 kobject_del+0x22/0x60 device_del+0x195/0x230 pm_runtime_set_memalloc_noio+0xac/0xf0 netdev_unregister_kobject+0x71/0x80 rollback_registered_many+0x205/0x2f0 rollback_registered+0x31/0x40 unregister_netdevice_queue+0x58/0xb0 unregister_netdev+0x20/0x30 ipoib_remove_one+0xb7/0x240 [ib_ipoib] ib_unregister_device+0xbc/0x1b0 [ib_core] ib_unregister_mad_agent+0x29/0x30 [ib_core] mlx4_ib_remove+0x67/0x280 [mlx4_ib] INFO: task echo:24082 blocked for more than 120 seconds. Tainted: G OE 4.1.12-37.5.1.el6uek.x86_64 #2 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call Trace: schedule+0x3e/0x90 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0x95/0x110 ? _rcu_barrier+0x177/0x220 mutex_lock+0x23/0x40 rtnl_lock+0x15/0x20 netdev_run_todo+0x81/0x1f0 rtnl_unlock+0xe/0x10 ipoib_vlan_delete+0x12f/0x1c0 [ib_ipoib] delete_child+0x69/0x80 [ib_ipoib] dev_attr_store+0x20/0x30 sysfs_kf_write+0x41/0x50 Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Reviewed-by: NAlex Vesker <valex@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Guy Levi 提交于
According to mlx4 convention, need to fail the command due to a non-zero value in the user data which is expected to be zero. Fixes: 3078f5f1 ("IB/mlx4: Add support for RSS QP") Signed-off-by: NGuy Levi <guyle@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Guy Levi 提交于
rx_key_len is not in use and needs to be removed. Fixes: 3078f5f1 ("IB/mlx4: Add support for RSS QP") Signed-off-by: NGuy Levi <guyle@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Guy Levi 提交于
The mlx4 ABI defines to have structures with alignment of 64B. Fixes: 400b1ebc ("IB/mlx4: Add support for WQ related verbs") Signed-off-by: NGuy Levi <guyle@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Guy Levi 提交于
The mlx4 was designed to support QP type of MLX4_IB_QPT_RAW_PACKET. Fixes: 3078f5f1 ("IB/mlx4: Add support for RSS QP") Signed-off-by: NGuy Levi <guyle@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Assign the statistics and configuration structure pointer on success. Fixes: fe248c3a ('IB/mlx5: Add delay drop configuration and statistics') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Talat Batheesh 提交于
Fix spelling mistakes in remarks "retrun"->"return" "Decalring"->"Declaring" Signed-off-by: NTalat Batheesh <talatb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Talat Batheesh 提交于
Fix spelling mistakes in remarks "retrun"->"return" "cancell"->"cancel" Signed-off-by: NTalat Batheesh <talatb@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The "lg" variable is declared as int so in all places where this variable is used as a shift operand, the output will be int too. This produces the following smatch warning: drivers/infiniband/hw/mthca/mthca_cmd.c:701 mthca_map_cmd() warn: should '1 << lg' be a 64 bit type? Simple declaration of "1" to be "1ULL" will fix the issue. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Sparse tool complains with the following error: drivers/infiniband/hw/usnic/usnic_ib_main.c:445:16: warning: cast removes address space of expression Fix it by doing casting on correct field and convert function helper which sets ifaddr to be void, because there are no users who are interested in returned value. Fixes: c7845bca ("IB/usnic: Add UDP support in u*verbs.c, u*main.c and u*util.h") Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
All callers of acquire_group() passed the same gfp_mask to it and it is safe to remove it. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The return values from rdma_node_get_transport() are strict and IB_LINK_LAYER_UNSPECIFIED is unreachable in this flow. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Remove call to BUG() in case wrong node_type was provided. This flow is unreachable, because node_types are supplied from specific enum. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Cleanup patch prior exporting the ib_device_cap_flags to the user space. In this patch, we are aligning the indentation, removing IB_DEVICE_INIT_TYPE and IB_DEVICE_RESERVED fields, because it is not used in the kernel. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
The functions ib_register_event_handler() and ib_unregister_event_handler() always returned success and they can't fail. Let's convert those functions to be void, remove redundant checks and cleanup tons of goto statements. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maor Gottlieb 提交于
Avoid extra padding by replacing the order of inl_recv_sz and reserved, otherwise 'mlx4_ib_create_qp' structure might be larger than legacy user input leading to copy of some garbage data from the user space buffer. Fixes: ea30b966 ('IB/mlx4: Add inline-receive support') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Avoid usage of uninitialized variable. Fixes: 3078f5f1 ("IB/mlx4: Add support for RSS QP") Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Parav Pandit 提交于
This patch introduces two helper functions to copy ah attributes from uverbs to internal ib_ah_attr structure and the other way during modify qp and query qp respectively. Signed-off-by: NParav Pandit <parav@mellanox.com> Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
When rdma_cm is initializing a cma_device it checks if this device supports the preferred default GID type. This check was done in a wrong way and therefore sometimes rdma_cm is coming up with default GID type that is not supported by the device. Fix that by checking for supported GID type properly. Fixes: 3c7f67d1 ("IB/cma: Fix default RoCE type setting") Signed-off-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NSelvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Doug Ledford 提交于
Pick up -rc fixes. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Majd Dibbiny 提交于
CM layer calls ib_modify_port() regardless of the link layer. For the Ethernet ports, qkey violation and Port capabilities are meaningless. Therefore, always return success for ib_modify_port calls on the Ethernet ports. Cc: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Reviewed-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Majd Dibbiny 提交于
In case we have SQ and RQ for Raw Packet QP, the SQ's event handler wasn't assigned. Fixing this by assigning event handler for each WQ after creation. [ 1877.145243] Call Trace: [ 1877.148644] <IRQ> [ 1877.150580] [<ffffffffa07987c5>] ? mlx5_rsc_event+0x105/0x210 [mlx5_core] [ 1877.159581] [<ffffffffa0795bd7>] ? mlx5_cq_event+0x57/0xd0 [mlx5_core] [ 1877.167137] [<ffffffffa079208e>] mlx5_eq_int+0x53e/0x6c0 [mlx5_core] [ 1877.174526] [<ffffffff8101a679>] ? sched_clock+0x9/0x10 [ 1877.180753] [<ffffffff810f717e>] handle_irq_event_percpu+0x3e/0x1e0 [ 1877.188014] [<ffffffff810f735d>] handle_irq_event+0x3d/0x60 [ 1877.194567] [<ffffffff810f9fe7>] handle_edge_irq+0x77/0x130 [ 1877.201129] [<ffffffff81014c3f>] handle_irq+0xbf/0x150 [ 1877.207244] [<ffffffff815ed78a>] ? atomic_notifier_call_chain+0x1a/0x20 [ 1877.214829] [<ffffffff815f434f>] do_IRQ+0x4f/0xf0 [ 1877.220498] [<ffffffff815e94ad>] common_interrupt+0x6d/0x6d [ 1877.227025] <EOI> [ 1877.228967] [<ffffffff814834e2>] ? cpuidle_enter_state+0x52/0xc0 [ 1877.236990] [<ffffffff81483615>] cpuidle_idle_call+0xc5/0x200 [ 1877.243676] [<ffffffff8101bc7e>] arch_cpu_idle+0xe/0x30 [ 1877.249831] [<ffffffff810b4725>] cpu_startup_entry+0xf5/0x290 [ 1877.256513] [<ffffffff815cfee1>] start_secondary+0x265/0x27b [ 1877.263111] Code: Bad RIP value. [ 1877.267296] RIP [< (null)>] (null) [ 1877.273264] RSP <ffff88046fd63df8> [ 1877.277531] CR2: 0000000000000000 Fixes: 19098df2 ("IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types") Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Noa Osherovich 提交于
Commit 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") introduced the concept of type in ah_attr: * During ib_register_device, each port is checked for its type which is stored in ib_device's port_immutable array. * During uverbs' modify_qp, the type is inferred using the port number in ib_uverbs_qp_dest struct (address vector) by accessing the relevant port_immutable array and the type is passed on to providers. IB spec (version 1.3) enforces a valid port value only in Reset to Init. During Init to RTR, the address vector must be valid but port number is not mentioned as a field in the address vector, so its value is not validated, which leads to accesses to a non-allocated memory when inferring the port type. Save the real port number in ib_qp during modify to Init (when the comp_mask indicates that the port number is valid) and use this value to infer the port type. Avoid copying the address vector fields if the matching bit is not set in the attr_mask. Address vector can't be modified before the port, so no valid flow is affected. Fixes: 44c58487 ('IB/core: Define 'ib' and 'roce' rdma_ah_attr types') Signed-off-by: NNoa Osherovich <noaos@mellanox.com> Reviewed-by: NYishai Hadas <yishaih@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 23 8月, 2017 6 次提交
-
-
由 Jason Gunthorpe 提交于
If a message comes in and we do not have the client in the table, then try to load the module supplying that client using MODULE_ALIAS to find it. This duplicates the scheme seen in other netlink muxes (eg nfnetlink). Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jason Gunthorpe 提交于
Provide a module alias so that if userspace opens a netlink socket for RDMA the kernel support is loaded automatically. Signed-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Li Dongyang 提交于
We could use kvmalloc_array instead of the kmalloc and __vmalloc combination. After this we don't need to include linux/vmalloc.h Signed-off-by: NLi Dongyang <dongyang.li@anu.edu.au> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Li Dongyang 提交于
We observed multiple times on our Lustre OSS servers that when the system memory is fragmented, kmalloc() in create_kernel_qp() could fail order 4/5 allocations while we still have many free pages. Switch to kvmalloc_array() to allow the operation to contine. Signed-off-by: NLi Dongyang <dongyang.li@anu.edu.au> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Selvin Xavier 提交于
ib_get_eth_speed() return 0 on success. Fixing the condition checking and prevent reporting failure for query_port verb. Fixes: d4186194 ("Add generic function to extract IB speed from netdev") Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yuval Shaia 提交于
The function pvrdma_idx_ring_is_valid_idx is not in used so let's remove it. Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Acked-by: NAdit Ranadive <aditr@vmware.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-