VMware tends to report PCM positions and period updates at utterly
wrong timing.  This screws up the recent PCM core code that tries
to correct the position based on the irq timing.

Now, when a backward irq position is detected, skip the update
instead of rebasing.  (This is almost the old behavior before
2.6.30.)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: fix race between write_metadata_buffer and get_write_access
  ext4: Fix ext4_mb_initialize_context() to initialize all fields
  ext4: fix null handler of ioctls in no journal mode
  ext4: Fix buffer head reference leak in no-journal mode
  ext4: Move __ext4_journalled_writepage() to avoid forward declaration
  ext4: Fix mmap/truncate race when blocksize < pagesize && !nodellaoc
  ext4: Fix mmap/truncate race when blocksize < pagesize && delayed allocation
  ext4: Don't look at buffer_heads outside i_size.
  ext4: Fix goal inum check in the inode allocator
  ext4: fix no journal corruption with locale-gen
  ext4: Calculate required journal credits for inserting an extent properly
  ext4: Fix truncation of symlinks after failed write
  jbd2: Fix a race between checkpointing code and journal_get_write_access()
  ext4: Use rcu_barrier() on module unload.
  ext4: naturally align struct ext4_allocation_request
  ext4: mark several more functions in mballoc.c as noinline
  ext4: Fix potential reclaim deadlock when truncating partial block
  jbd2: Remove GFP_ATOMIC kmalloc from inside spinlock critical region
  ext4: Fix type warning on 64-bit platforms in tracing events header

The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal.  Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.
Signed-off-by: Ndingdinghua <dingdinghua85@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
  Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
  Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
  Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
  Staging: rtl8192su: convert to net_device_ops
  Staging: serqt_usb2: declare qt_open static in serqt_usb2
  Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
  Staging: comedi: jr3_pci.c: add required includes
  Staging: meilhaus: add email address to TODO
  Staging: rspiusb: use NULL virtual address instead of a bogus one
  Staging: vt6655: compile fix
  Staging: rt2870: Add USB ID for Sitecom WL-608

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  wm97xx_batery: replace driver_data with dev_get_drvdata()
  omap: video: remove direct access of driver_data
  Sound: remove direct access of driver_data
  driver model: fix show/store prototypes in doc.
  Firmware: firmware_class, fix lock imbalance
  Driver Core: remove BUS_ID_SIZE
  sparc: remove driver-core BUS_ID_SIZE
  partitions: fix broken uevent_suppress conversion
  devres: WARN() and return, don't crash on device_del() of uninitialized device

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (48 commits)
  USB: otg: fix module reinsert issue
  USB: handle zero-length usbfs submissions correctly
  USB: EHCI: report actual_length for iso transfers
  USB: option: remove unnecessary and erroneous code
  USB: cypress_m8: remove invalid Clear-Halt
  USB: musb_host: undo incorrect change in musb_advance_schedule()
  USB: fix LANGID=0 regression
  USB: serial: sierra driver id_table additions
  USB serial: Add ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
  USB: fix race leading to a write after kfree in usbfs
  USB: Sierra: fix oops upon device close
  USB: option.c: add A-Link 3GU device id
  USB: Serial: Add support for Arkham Technology adapters
  USB: Fix option_ms regression in 2.6.31-rc2
  USB: gadget audio: select SND_PCM
  USB: ftdi: support NDI devices
  Revert USB: usbfs: deprecate and hide option for !embedded
  USB: usb.h: fix kernel-doc notation
  USB: RNDIS gadget, fix issues talking from PXA
  USB: serial: FTDI with product code FB80 and vendor id 0403
  ...

JFS hasn't really been supported for a while.  It's still maintained,
but saying it's supported is a stretch.  Updating my preferred email
address as well.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove duplicated #include('s) in
  arch/mn10300/kernel/sys_mn10300.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 405f5571 ("headers: smp_lock.h
redux") broke the build of two staging drivers. Fix them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pavel Roskin pointed out that kmemcheck indicated that
ext4_mb_store_history() was accessing uninitialized values of
ac->ac_tail and ac->ac_buddy leading to garbage in the mballoc
history.  Fix this by initializing the entire structure to all zeros
first.

Also, two fields were getting doubly initialized by the caller of
ext4_mb_initialize_context, so remove them for efficiency's sake.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The EXT4_IOC_GROUP_ADD and EXT4_IOC_GROUP_EXTEND ioctls should not
flush the journal in no_journal mode.  Otherwise, running resize2fs on
a mounted no_journal partition triggers the following error messages:

BUG: unable to handle kernel NULL pointer dereference at 00000014
IP: [<c039d282>] _spin_lock+0x8/0x19
*pde = 00000000 
Oops: 0002 [#1] SMP
Signed-off-by: NPeng Tao <bergwolf@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

We found a problem with buffer head reference leaks when using an ext4
partition without a journal.  In particular, calls to ext4_forget() would
not to a brelse() on the input buffer head, which will cause pages they
belong to to not be reclaimable.

Further investigation showed that all places where ext4_journal_forget() and
ext4_journal_revoke() are called are subject to the same problem.  The patch
below changes __ext4_journal_forget/__ext4_journal_revoke to do an explicit
release of the buffer head when the journal handle isn't valid.
Signed-off-by: NCurt Wohlgemuth <curtw@google.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Platform_device instance (pd) is not set to NULL in
usb_nop_xceiv_unregister() causing usb_nop_xceiv_register()
to fail during module reinsert.

From: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NBabu Ravi <ravibabu@ti.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>

This patch (as1262) fixes a bug in usbfs: It refuses to accept
zero-length transfers, and it insists that the buffer pointer be valid
even if there is no data being transferred.

The patch also consolidates a bunch of repetitive access_ok() checks
into a single check, which incidentally fixes the lack of such a check
for Isochronous URBs.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1259b) makes ehci-hcd return the total number of bytes
transferred in urb->actual_length for Isochronous transfers.
Until now, the actual_length value was unaccountably left at 0.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1264) removes a bunch of unnecessary and erroneous stuff
from the option USB-serial driver.  Clearly there's no need to verify
that the device pointer stored in the URBs is right or to store the
same pointer over again.  After all, the pointer can't change once it
has been set up.

There's also no need to call usb_clear_halt for the IN endpoint
multiple times -- in fact, doing so is an error since every time after
the first there will be active URBs queued for that endpoint.  Since
the Clear-Halts don't appear to be needed at all, the patch simply
removes them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1265) removes an erroneous call to usb_clear_halt from
the cypress_m8 driver.  The call isn't valid because it is made from
interrupt context whereas usb_clear_halt is a blocking routine.

Presumably the code has never been executed; if it did it would cause
an oops.  So instead treat -EPIPE like any other sort of unexplained
error.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit c9cd06b3 (musb_host: refactor
URB giveback) included due to my overlook the change incorrect in the
context of the current kernel -- undo it.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

commit b7af0bb2 ("USB: allow malformed LANGID descriptors") broke support
for devices without string descriptor support.

Reporting string descriptors is optional to USB devices, and a device
lets us know it can't deal with strings by responding to the LANGID
request with a STALL token.

The kernel handled that correctly before b7af0bb2 came in, but failed
hard if the LANGID was reported but broken. More than that, if a device
was not able to provide string descriptors, the LANGID was retrieved
over and over again at each string read request.

This patch changes the behaviour so that

 a) the LANGID is only queried once
 b) devices which can't handle string requests are not asked again
 c) devices with malformed LANGID values have a sane fallback to 0x0409
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- Updated the id_table with all devices that Sierra Wireless currently
   support
 - Re-ordered the contents of the id_table for better readability
Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adds USB ID for Turtelizer, an FT2232L-based JTAG/RS-232 adapter.
Signed-off-by: NKrzysztof Ha³asa <khc@pm.waw.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this fixes a race between async_completed() and proc_reapurbnonblock().

CPU A                   CPU B

spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
spin_unlock(&ps->lock);

                                if (!(as = async_getcompleted(ps)))
                                        return -EAGAIN;
                                return processcompl(as, (void __user * __user *)arg);

processcompl() calls free_async() which calls kfree(as)

as->status = urb->status;
if (as->signr) {
        sinfo.si_signo = as->signr;
        sinfo.si_errno = as->status;
        sinfo.si_code = SI_ASYNCIO;
        sinfo.si_addr = as->userurb;
        kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
                              as->euid, as->secid);
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);

write after kfree
Signed-off-by: NOliver Neukum <oliver@neukum.org>

This patch (as1263) fixes a mixup that occurred when conflicting
patches for the sierra driver were merged incorrectly.  The former
sierra_shutdown routine should have been become sierra_release, not
sierra_disconnect.

The symptom this fixes is an oops when the device file is closed after
a Sierra device has been unplugged (Bugzilla #13675).
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NPeter Naulls <peter@mushroomnetworks.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add A-Link 3GU device id 1e0e:9200 into option driver. The device
has 4 interfaces, of which 1 is handled by storage and the other 3
by option driver.

The device appears first as CD-only 1e0e:f000 device and must be
switched to 1e0e:9200 mode either by using "eject CD" or
usb_modeswitch.

For the record, the device does not work with generic usbserial
driver (usb disconnect when sending the ATDT command).
Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As reported by David Potts from Arkham Technology, the current driver
works with their hardware on addition of the device ids.
Signed-off-by: NAmit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit 32ebbe7b which filters the
SCSI REZERO command in option_ms based on a SCSI INQUIRY with a vendor
of Option breaks my Option Icon 225 (0af0:6971). This device returns a
vendor of ZCOPTION for the ZeroCD device. The following trivial patch
fixes things for me.
Signed-Off-By: NJonathan McDowell <noodles@earth.li>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix USB gadget audio: select SND_PCM, like many other sound
drivers do, to fix build errors:

drivers/built-in.o: In function `f_audio_playback_work':
audio.c:(.text+0x15a3e7): undefined reference to `snd_pcm_kernel_ioctl'
audio.c:(.text+0x15a471): undefined reference to `snd_pcm_lib_write'
drivers/built-in.o: In function `_snd_pcm_hw_param_set':
audio.c:(.text+0x15aca7): undefined reference to `snd_interval_refine'
drivers/built-in.o: In function `gaudio_setup':
(.init.text+0x12adf): undefined reference to `_snd_pcm_hw_params_any'
drivers/built-in.o: In function `gaudio_setup':
(.init.text+0x12b43): undefined reference to `snd_pcm_kernel_ioctl'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It enhances the driver for FTDI-based USB serial adapters to recognize and
support Northern Digital Inc (NDI) measurement equipment. NDI has been
providing this patch for various kernel flavors for several years and we would
like to see these changes built in to the driver so that our equipement works
without the need for customers to patch the kernel themselves.

The patch makes small modifications to 2 files: ./drivers/usb/serial/ftdi_sio.c
and ./drivers/usb/serial/ftdi_sio.h. It accomplishes 3 things:

1. Define the VID and PIDs to allow the driver to recognize the NDI devices.
2. Map the 19200 baud rate setting to our higher baud rate of 1.2Mb
   We would have chosen to map 38400 to the higher rate, similar to what
   several other vendors have done, but some of our legacy customers actually
   use 38400, therefore we remap 19200 to the higher rate.
3. We set the default transmit latency in the FTDI chip to 1ms for our devices.
   Our devices are typically polled at 60Hz and the default ftdi latency
   seriously affects turn-around time and results in missed data frames. We
   have created a modprobe option that allows this setting to be increased.
   This has proven necessary particularly in some virtualized environments.
Signed-off-by: NMartin P. Geleynse <mgeleyns@ndigital.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit cc71329b, so that
Red Hat machines can boot properly.  It seems that the Red Hat initrd
code tries to watch the /proc/bus/usb/devices file to monitor usb
devices showing up.  While this task is prone to lots of races and does
not show the true state of the system, they seem to like it.

So for now, don't move this option under the EMBEDDED config option.


Cc: Scott James Remnant <scott@canonical.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix usb.h kernel-doc warnings:

Warning(include/linux/usb.h:918): Excess struct/union/enum/typedef member 'nodename' description in 'usb_device_driver'
Warning(include/linux/usb.h:939): No description found for parameter 'nodename'
Warning(include/linux/usb.h:1219): No description found for parameter 'sg'
Warning(include/linux/usb.h:1219): No description found for parameter 'num_sgs'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The reworked Ethernet gadget has an RNDIS interop problem when used
with the CDC subset driver ... e.g. on PXA 2xx and 3xx hardware,
which currently has a hard time talking to MS-Windows hosts.

The issue is that Microsoft requires USB_CLASS_COMM.  Fix by tweaking
the CDC subset driver to not switch to USB_CLASS_VENDOR_SPEC if RNDIS
is used in some other device configuration.

[ UPDATED:  some "statements" were comma-terminated; fix that. ]
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Aric Blumer <aric@sdgsystems.net>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It seems an USB device with vendor id 0403 and product code FB80 has an
FTDI serial io chip as well: http://ftdichip.com/Drivers/D2XX.htm
This device in fact is a true random generantor by comsci:
http://comscire.com/Products/R2000KU/
So the following patch should add support for this device if I am
correct. Not tested as I do not own this device (I would like support in
the kernel so that my entropybroker application (which distributes
entrop data (random values) between servers and clients)).


From: Folkert van Heusden <folkert@vanheusden.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The commit 335f8514 introduced a
regression which stopped usb consoles from working correctly as a
kernel boot console as well as interactive login device.

The addition of the serial_close() which in turn calls
tty_port_close_start() will change the reference count of port.count
and warn about it.  The usb console code had previously incremented
the port.count to indicate it was making use of the device as a
console and the forced change causes a double open on the usb device
which leads to a non obvious kernel oops later on when the tty is
freed.

To fix the problem instead make use of port->console to track if the
port is in fact an active console port to avoid double initialization
of the usb serial device.  The port.count is incremented and
decremented only with in the scope of usb_console_setup() for the
purpose of the low level driver initialization.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added descriptions (for WIRELESS_CONTROLLER and MISC) were taken from
the usb-devices script now included in usbutils.

Also sort the classes in the same order as in include/linux/usb/ch9.h
for easier comparison for future updates.
Signed-off-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a memory leak in devio.c::processcompl

If writing to user space fails the packet must be discarded, as it
already has been removed from the queue of completed packets.
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1257) revises the way ehci-hcd detects STALLs.  The
logic is a little peculiar because there's no hardware status bit
specifically meant to indicate a STALL.  You just have to guess that a
STALL was received if the BABBLE bit (which is fatal) isn't set and
the transfer stopped before all its retries were used up.

The existing code doesn't do this properly, because it tests for MMF
(Missed MicroFrame) and DBE (Data Buffer Error) before testing the
retry counter.  Thus, if a transaction gets either MMF or DBE the
corresponding flag is set and the transaction is retried.  If the
second attempt receives a STALL then -EPIPE is the correct return
value.  But the existing code would see the MMF or DBE flag instead
and return -EPROTO, -ENOSR, or -ECOMM.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1256) changes ehci-hcd and all the other drivers in the
EHCI family to make use of the new clear_tt_buffer callbacks.  When a
Clear-TT-Buffer request is in progress for a QH, the QH is not allowed
to be linked into the async schedule until the request is finished.
At that time, if there are any URBs queued for the QH, it is linked
into the async schedule.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1255) updates the interface for calling
usb_hub_clear_tt_buffer().  Even the name of the function is changed!

When an async URB (i.e., Control or Bulk) going through a high-speed
hub to a non-high-speed device is cancelled or fails, the hub's
Transaction Translator buffer may be left busy still trying to
complete the transaction.  The buffer has to be cleared; that's what
usb_hub_clear_tt_buffer() does.

It isn't safe to send any more URBs to the same endpoint until the TT
buffer is fully clear.  Therefore the HCD needs to be told when the
Clear-TT-Buffer request has finished.  This patch adds a callback
method to struct hc_driver for that purpose, and makes the hub driver
invoke the callback at the proper time.

The patch also changes a couple of names; "hub_tt_kevent" and
"tt.kevent" now look rather antiquated.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NOliver Neukum <oliver@neukum.org>
Cc: stable <stable@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>