- 10 7月, 2007 5 次提交
-
-
由 Stefan Richter 提交于
This affects of course only the "soft shutdown" case, e.g. "modprobe -r firewire-sbp2", while it doesn't matter for hot unplug. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
This currently only affects one bridge in the hardwired blacklist. I don't own one of those, hence haven't tested it. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Use a speed probe to determine the speed over 1394b buses and of nodes which report a link speed less than their PHY speed. Log the effective maximum speed of newly created nodes in dmesg. Also, read the config ROM (except bus info block) at the maximum speed rather than S100. This isn't a real optimization though because we still only use quadlet read requests for the entire ROM. The patch also adds support for S1600 and S3200, although such hardware does not exist yet. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Also remove some errno printouts which will be shown by infrastructure code anyway. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
cleanup after support of single-buffer requests was dropped Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Hoegsberg <krh@redhat.com>
-
- 01 6月, 2007 1 次提交
-
-
由 Stefan Richter 提交于
The attribute /sys/bus/scsi/devices/*:*:*:*/ieee1394_id, as generated by the old sbp2 driver, is typically used to create persistently named links in /dev/disk/by-id. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
- 11 5月, 2007 10 次提交
-
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
The SCSI layer only passes sg requests down, so drop the use_sg == 0, request_bufflen != 0 case. Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
This should be the last missing checks. Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Avoids an extra allocation and simplifies lifetime rules for the scsi_host. Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Olaf Hering 提交于
This patch loads fw-sbp2 if sbp2 is still in the config file. So one can go back and forth between releases without worry about the root filesystem drivers. Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Existing mkinitrd scripts still have to be adapted, unless they grok module aliases. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Drop filenames from file preamble, drop editor annotations and use standard indent style for block comments. Signed-off-by: NKristian Hoegsberg <krh@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (fixed typo)
-
- 12 4月, 2007 3 次提交
-
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> (Reverted part which moved it from eh_abort_handler to eh_host_reset_handler) Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
In some situations we can receive the ORB status write before we have received the ORB pointer write response. When this happens, we assume that the fw_transaction is finished and free the ORB struct containing the fw_transaction. This fix make the status write logic only accept status writes for ORBs where the initial ORB pointer write transaction finished. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Or the SAM status codes from the device sense data into the command error code. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
- 16 3月, 2007 2 次提交
-
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
- 10 3月, 2007 18 次提交
-
-
由 Kristian Høgsberg 提交于
The mod_timer based timing out of orb was a little to agressive and would time out legit, but long-lived scsi cmds. Besides, the scsi stack keeps track of this already. Since we're only timing out management orbs, go back to wait_for_completion_timeout. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Use PREPARE_DELAYED_WORK to just change the function pointer. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Pointed out by Pete Zaitcev. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
This lets the SCSI stack retry the command when a SCSI command is interrupted by a FireWire bus reset. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Sometimes we reconnect too soon, sometimes too late. Adding a retry mechanism make the reconnect step much more robust. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
When a management ORB times out, either because the fw_transaction times out or when we don't get the status write, we need to properly cancel the entire operation. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Drivers such as fw-sbp2 had no way to properly cancel in-progress transactions, which could leave a pending transaction or an unset packet in the low-level queues after kfree'ing the containing structure. fw_cancel_transaction() lets drivers cancel a submitted transaction. Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Copied from sbp2: - enable spin-up by START STOP UNIT for all devices - enable INQUIRY (36) workaround on demand - prefer READ/ WRITE (10) over (6) for all devices - prefer MODE SENSE (10) for MMC devices Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Definitions as per IEEE 1212 and IEEE 1394: Node ID: Concatenation of bus ID and local ID. 16 bits long. Bus ID: Identifies a particular bus within a group of buses interconnected by bus bridges. Local ID: Identifies a particular node on a bus. PHY ID: Local ID of IEEE 1394 nodes. 6 bits long. Never ever use a variable called node_id for anything else than a node ID. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
There is no emulation going on here too. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NKristian Høgsberg <krh@redhat.com>
-
由 Stefan Richter 提交于
Instances of struct file_operations and struct fw_card_driver can be qualified as "const". Ditto with struct fw_descriptor.data, struct fw_device_id, and predefined instances of struct fw_address_region, at least in the current implementation. Data qualified as const is placed into the .rodata section which won't be mixed with dirty data. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Stefan Richter 提交于
drivers/firewire/fw-sbp2.c: At top level: drivers/firewire/fw-sbp2.c:1060: error: storage size of '__mod_ieee1394_device_table' isn't known (error pointed out by akpm) Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Andrew Morton 提交于
ia64: drivers/firewire/fw-sbp2.c: In function `sbp2_command_orb_map_scatterlist': drivers/firewire/fw-sbp2.c:826: warning: implicit declaration of function `sg_dma_len' drivers/firewire/fw-sbp2.c:828: warning: implicit declaration of function `sg_dma_address' drivers/firewire/fw-sbp2.c:837: error: invalid use of undefined type `struct scatterlist' drivers/firewire/fw-sbp2.c:838: error: invalid use of undefined type `struct scatterlist' Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-
由 Kristian Høgsberg 提交于
Signed-off-by: NKristian Høgsberg <krh@redhat.com> Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
-