Drivers should depend on rather than select their MFDs.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220707111753.16581-1-broonie@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

max597x is hot swap controller.
This regulator driver controls the same & also configures fault
protection features supported by the chip.
Signed-off-by: NPatrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: NMarcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: NNaresh Solanki <Naresh.Solanki@9elements.com>
Link: https://lore.kernel.org/r/20220705122244.472894-4-Naresh.Solanki@9elements.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add mt6370 DisplayBias and VibLDO support.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20220623115631.22209-10-peterwu.pub@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add RT5120 PMIC regulator support.

It integrates 4 buck convertes, 1 LDO voltage regulator, 1 external
enable signal to control the external power source.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1655892104-10874-4-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.
Signed-off-by: NMarkuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add support for Richtek RT5759 high-performance DCDC converter.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1648294788-11758-3-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add support for Richtek RT5190A PMIC.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1646812903-32496-3-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

TI's TPS62864/TPS6286/TPS62868/TPS62869 are high-frequency synchronous
step-down converters controlled via I2C.  There are differences in the
electrical characteristics and packaging between the variants, but the
register interfaces are identical.
Signed-off-by: NVincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220204155241.576342-3-vincent.whitchurch@axis.comSigned-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

We need independent control of the resets for the panel&bridge,
vs the touch controller.

Expose the reset lines that are on the Atmel's port C via the GPIO
API so that they can be controlled appropriately.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: NDetlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20220124220129.158891-7-detlev.casanova@collabora.comSigned-off-by: NMark Brown <broonie@kernel.org>

The MAX20086-MAX20089 are dual/quad power protectors for cameras. Add a
driver that supports controlling the outputs individually. Additional
features, such as overcurrent detection, may be added later if needed.
Signed-off-by: NWatson Chow <watson.chow@avnet.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220106224350.16957-3-laurent.pinchart+renesas@ideasonboard.comSigned-off-by: NMark Brown <broonie@kernel.org>

The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in
the kernel the Regulators and Clocks are controlled by an OpRegion
driver designed to work with power control methods defined in ACPI, but
some platforms lack those methods, meaning drivers need to be able to
consume the resources of these chips through the usual frameworks.

This commit adds a driver for the regulators provided by the tps68470,
and is designed to bind to the platform_device registered by the
intel_skl_int3472 module.

This is based on this out of tree driver written by Intel:
https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/regulator/tps68470-regulator.c
with various cleanups added.
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-6-hdegoede@redhat.comSigned-off-by: NMark Brown <broonie@kernel.org>

Driver was upstreamed in 2013 and never got a user, remove it.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211021192258.21968-3-digetx@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

The MFD for SY7636A still isn't merged so we need a dependency even if
it ends up not having a real driver due to the header file.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20211015122551.38951-5-alistair@alistair23.meSigned-off-by: NMark Brown <broonie@kernel.org>

MAX8973 is supposed to be MAX8973A. Kconfig and the
initial comment of max8973-regulator.c were modified
accordingly.
Signed-off-by: NRamona Alexandra Nechita <ramona.nechita@analog.com>
Link: https://lore.kernel.org/r/20210920061137.10884-1-ramona.nechita@analog.comSigned-off-by: NMark Brown <broonie@kernel.org>

COMPILE_TEST is helpful to find compilation errors in other platform(e.g.X86).
In this case, the support of COMPILE_TEST is added, so this module could
be compiled in other platform(e.g.X86), without ARCH_SYNQUACER configuration.
Signed-off-by: NCai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210908105738.1933-1-caihuoqing@baidu.comSigned-off-by: NMark Brown <broonie@kernel.org>

This adds support for Richtek RTQ2134 SubPMIC.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1626422636-29458-2-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

There are a couple of spelling mistakes in the Kconfig text. Fix them.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210719103429.15544-1-colin.king@canonical.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add suport for Richtek RTQ6752.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1625845236-30285-2-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Fix build error if REGMAP_I2C is not set.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210622141526.472175-1-axel.lin@ingics.comSigned-off-by: NMark Brown <broonie@kernel.org>

MAX8893 is a simple regulator which can be found on some of Sasmsung
phones.
Signed-off-by: NSergey Larin <cerg2010cerg2010@mail.ru>
Link: https://lore.kernel.org/r/20210618141607.884-1-cerg2010cerg2010@mail.ruSigned-off-by: NMark Brown <broonie@kernel.org>

Initial support for the Silergy SY7636A-regulator Power Management chip.
Signed-off-by: NAlistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210615103400.946-3-alistair@alistair23.meSigned-off-by: NMark Brown <broonie@kernel.org>

Richtek RT6245 is a high-performance, synchronous step-down converter
that can deliver up to 14A output current with an input supply voltage
range of 4.5V to 17V.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622699844-19203-2-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Add support for Richtek RT6160 voltage regulator. It can provide up
to 3A output current within the adjustable voltage from 2025mV
to 5200mV. It integrate a buckboost converter to support wide input
voltage range from 2200mV to 5500mV.
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1622611906-2403-2-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

The MT6359 is a regulator found on boards based on MediaTek MT6779 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Signed-off-by: NWen Su <wen.su@mediatek.com>
Signed-off-by: NHsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

The only known BD70528 use-cases are such that the PMIC is controlled
from separate MCU which is not running Linux. I am not aware of
any Linux driver users. Furthermore, it seems there is no demand for
this IC. Let's ease the maintenance burden and drop the driver. We can
always add it back if there is sudden need for it.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/d7271362129edceebc512b49efed9ee7c3efcb6a.1622116622.git.matti.vaittinen@fi.rohmeurope.comSigned-off-by: NMark Brown <broonie@kernel.org>

The other Richtek drivers has Richtek prefix, make it consistent.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210530124101.477727-2-axel.lin@ingics.comSigned-off-by: NMark Brown <broonie@kernel.org>

Mend the Kconfig for REGULATOR_BD71815 to prevent build errors:

riscv32-linux-ld: drivers/regulator/bd71815-regulator.o: in function `.L0 ':
regulator.c:289: undefined reference to `rohm_regulator_set_dvs_levels'
riscv32-linux-ld: drivers/regulator/bd71815-regulator.c:370: undefined reference to `rohm_regulator_set_dvs_levels'

Fixes: 1aad3900 ("regulator: Support ROHM BD71815 regulators")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Reviewed-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210523001427.13500-1-rdunlap@infradead.orgSigned-off-by: NMark Brown <broonie@kernel.org>

Support voltage control for regulators on ROHM BD71815 PMIC.

ROHM BD71815 contains 5 bucks, 7 LDOs and a boost (intended for LED).
Bucks 1 and 2 support HW state based voltage level and enable states. Other
regulators support HW state based enable states. All bucks and LDOs 1-5
allow voltage changes for RUN state and LDO4 can be enabled/disabled via
GPIO.

LDO3 does support changing between two predetermined voltages by using
a GPIO but this functionality is not included in this commit.

This work is derived from driver originally written by Tony Luo
<luofc@embedinfo.com> - although not much of original work is left.
Signed-off-by: NMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

This driver is ready for mainstream. Move it out of staging.
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: NMark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/815b79a4e93f133478d9a5b2dd429526dcfe1dde.1616695231.git.mchehab+huawei@kernel.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The MT6315 is a regulator found on boards based on MediaTek MT8192 and
probably other SoCs. It connects as a slave to SoC using SPMI.
Signed-off-by: NHsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1612678457-11548-3-git-send-email-hsin-hsiung.wang@mediatek.comSigned-off-by: NMark Brown <broonie@kernel.org>

The ST-Ericsson U300 platform is getting removed, so this driver is no
longer needed.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210120151307.1726876-1-arnd@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

pf8x00 module build was not documented.
Signed-off-by: NAdrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: NJagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20210114174714.122561-2-adrien.grassein@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Driver for regulators exposed by the DVFSRC (dynamic voltage and
frequency scaling resource collector) found in devices based on
mt8183 and newer platforms.
Signed-off-by: NHenry Chen <henryc.chen@mediatek.com>
Link: https://lore.kernel.org/r/1608790134-27425-12-git-send-email-henryc.chen@mediatek.comSigned-off-by: NMark Brown <broonie@kernel.org>

A built-in regulator driver cannot link against a modular cmd_db driver:

qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr'

There is already a dependency for RPMh, so add another one of this
type for cmd_db.

Fixes: 34c5aa26 ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error")
Fixes: 46fc033e ("regulator: add QCOM RPMh regulator driver")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.orgSigned-off-by: NMark Brown <broonie@kernel.org>

Add support for the DC-DC converters and LDO regulators found in
the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x
family of PMICs.
Co-developed-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NCristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/1117b1a01b3948446cb3cc407e52de3a5d4212b0.1609258905.git.cristian.ciocaltea@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Adds support for Richtek RT4831 DSV Regulator
Signed-off-by: NChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1608217244-314-6-git-send-email-u0084500@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>

Restrict REGULATOR_QCOM_RPMH to QCOM_COMMAND_DB it the latter is enabled.

Fixes this build error:
  microblaze-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe':
  (.text+0x354): undefined reference to `cmd_db_read_addr'

Fixes: 778279f4 ("soc: qcom: cmd-db: allow loading as a module")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: NLina Iyer <ilina@codeaurora.org>
Link: https://lore.kernel.org/r/20201225185004.20747-1-rdunlap@infradead.orgSigned-off-by: NMark Brown <broonie@kernel.org>

Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201210212748.5849-1-festevam@gmail.comSigned-off-by: NMark Brown <broonie@kernel.org>