Opcodes 0x80-0x83
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This adds group decoding for opcode 0x0f 0x01 (group 7).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add group decoding support for opcode 0xfe (group 4) and 0xff (group 5).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This adds group decoding support for opcodes 0xf6, 0xf7 (group 3).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This adds group decode support for opcode 0x8f.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Certain x86 instructions use bits 3:5 of the byte following the opcode as an
opcode extension, with the decode sometimes depending on bits 6:7 as well.
Add support for this in the main decoding table rather than an ad-hock
adaptation per opcode.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move all the architecture-specific fields in kvm_vcpu into a new struct
kvm_vcpu_arch.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Acked-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Stack instructions are always 64-bit on 64-bit mode; many of the
emulated stack instructions did not take that into account.  Fix by
adding a 'Stack' bitflag and setting the operand size appropriately
during the decode stage (except for 'push r/m', which is in a group
with a few other instructions, so it gets its own treatment).

This fixes random crashes on Vista x64.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We prepare eflags for the emulated instruction, then clobber it with an 'andl'.
Fix by popping eflags as the last thing in the sequence.

Patch taken from Xen (16143:959b4b92b6bf)
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

Unify the special instruction switch with the regular instruction switch,
and the two byte special instruction switch with the regular two byte
instruction switch.  That makes it much easier to find an instruction or
the place an instruction needs to be added in.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The rep prefix cleanup left two switch () statements next to each other.
Unify them.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently rep processing is handled somewhere in the middle of instruction
processing.  Move it to a sensible place.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add emulation for the cmps instruction.  This lets OpenBSD boot on kvm.
Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Previous patches have removed the dependency on cr2; we can now stop passing
it to the emulator and rename uses to 'memop'.
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Current implementation is to toggle, which is incorrect.  Patch ported from
corresponding Xen code.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

cmps and scas instructions accept repeat prefixes F3 and F2. So in
order to emulate those prefixed instructions we need to be able to know
if prefixes are REP/REPE/REPZ or REPNE/REPNZ. Currently kvm doesn't make
this distinction. This patch introduces this distinction.
Signed-off-by: NGuillaume Thouvenin <guillaume.thouvenin@ext.bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of fetching one byte at a time, prefetch 15 bytes (or until the next
page boundary) to avoid guest page table walks.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current 'lods' and 'stos' is depending on incoming CR2 rather than decode
memory address from registers.
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

it is removed beacuse it isnt supported on a real host
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

Now that rex_prefix is part of the decode cache, there is no need to pass
it along.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instructions like 'inc reg' that have the register operand encoded
in the opcode are currently specially decoded.  Extend
decode_register_operand() to handle that case, indicated by having
DstReg or SrcReg without ModRM.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Share the common parts of SrcReg and DstReg decoding.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The 'mov abs' instruction family (opcodes 0xa0 - 0xa3) still depends on cr2
provided by the page fault handler.  This is wrong for several reasons:

- if an instruction accessed misaligned data that crosses a page boundary,
  and if the fault happened on the second page, cr2 will point at the
  second page, not the data itself.

- if we're emulating in real mode, or due to a FlexPriority exit, there
  is no cr2 generated.

So, this change adds decoding for this instruction form and drops reliance
on cr2.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

First step to split kvm_vcpu.  Currently, we just use an macro to define
the common fields in kvm_vcpu for all archs, and all archs need to define
its own kvm_vcpu struct.
Signed-off-by: NZhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instruction: cmc, clc, cli, sti
opcodes: 0xf5, 0xf8, 0xfa, 0xfb respectively.

[avi: fix reference to EFLG_IF which is not defined anywhere]
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instructions:
	inc r16/r32 (opcode 0x40-0x47)
	dec r16/r32 (opcode 0x48-0x4f)
Signed-off-by: NNitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NMike D. Day <ncmike@ncultra.org>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch modifies the management of REX prefix according behavior
I saw in Xen 3.1.  In Xen, this modification has been introduced by
Jan Beulich.

http://lists.xensource.com/archives/html/xen-changelog/2007-01/msg00081.htmlSigned-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove no_wb, use dst.type = OP_NONE instead, idea stollen from xen-3.1
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove _eflags and use directly ctxt->eflags. Caching eflags is not needed as
it is restored to vcpu by kvm_main.c:emulate_instruction() from ctxt->eflags
only if emulation doesn't fail.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

To improve readability, move push, writeback, and grp 1a/2/3/4/5/9 emulation
parts into functions.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move emulate_ctxt to kvm_vcpu to keep emulate context when we exit from kvm
module. Call x86_decode_insn() only when needed. Modify x86_emulate_insn() to
not modify the context if it must be re-entered.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

emulate_instruction() calls now x86_decode_insn() and x86_emulate_insn().
x86_emulate_insn() is x86_emulate_memop() without the decoding part.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Split the decoding process into a new function x86_decode_insn().
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move all x86_emulate_memop() common variables between decode and execute to a
structure decode_cache.  This will help in later separating decode and
emulate.

            struct decode_cache {
                u8 twobyte;
                u8 b;
                u8 lock_prefix;
                u8 rep_prefix;
                u8 op_bytes;
                u8 ad_bytes;
                struct operand src;
                struct operand dst;
                unsigned long *override_base;
                unsigned int d;
                unsigned long regs[NR_VCPU_REGS];
                unsigned long eip;
                /* modrm */
                u8 modrm;
                u8 modrm_mod;
                u8 modrm_reg;
                u8 modrm_rm;
                u8 use_modrm_ea;
                unsigned long modrm_ea;
                unsigned long modrm_val;
           };
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove #ifdef functions never used
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>