- 22 1月, 2012 4 次提交
-
-
由 Javier Martin 提交于
Visstrim_M10 has an external class D amplifier. This patch provides support for controlling the 4 possible gain levels and per channel muting. Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The problem was introduced due to the obscure formatting some of the older drivers use. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
If a driver is using regmap directly ensure that we're coherent with non-ASoC register updates by using the regmap API directly to do our read/modify/write cycles. This will bypass the ASoC cache but drivers using regmap directly should not be using the ASoC cache. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
On the off chance that an application both pays attention and gets confused. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 1月, 2012 36 次提交
-
-
由 Mark Brown 提交于
This is more what the device model wants us to do and will allow use by non-audio functions before the audio part of the device has come up. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This will allow us to move the interrupt allocation out of the ASoC part of the driver and simplifies the locking by removing any reliance in the bulk of the interrupt path on the big CODEC lock. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The framework should bring the device down before it calls the driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
McPDM internal FIFO is 24 bit wide. From the 32 bit sample 8 bit is discarded. Let application know about this via msbits constraint. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Core can set the msbits constraint in behalf of the dai. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Core can set the msbits constraint in behalf of the dai. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
Core can set the msbits constraint in behalf of the dai. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Fabio Estevam 提交于
Throughout the sgtl5000 driver source code and also in the sgtl5000 datasheet the revision code is shown in hexadecimal. Print it hex format, for consistency. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Reset is active low, make sure we leave it asserted when release the device. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The WM8993 only supports I2C so don't ifdef the I2C support in the driver. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
If an interrupt is supplied then use it for thermal warning and FLL lock notifications. When using the interrupt raise the timeout for the FLL lock substantially to reduce the chances of spurious warnings. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Most devices accept data in formats that don't correspond directly to their internal format. ALSA allows us to set a msbits constraint which tells userspace about this in case it finds it useful (for example, in order to avoid wasting effort dithering bits that will be ignored when raising the sample size of data) so provide a mechanism for drivers to specify the number of bits that are actually significant on a DAI and add the appropriate constraints along with all the others. This is done slightly awkwardly as the constraint is specified per sample size - we loop over every possible sample size, including ones that the device doesn't support and including ones that have fewer bits than are actually used, but this is harmless as the upper layers do the right thing in these cases. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Mark Brown 提交于
Simple switches since there's no per-channel control. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dimitris Papastamos 提交于
This must be a leftover from a previous driver. Signed-off-by: NDimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Axel Lin 提交于
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Much more compact, both in terms of source and especially in terms of RAM used at runtime. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Javier Martin 提交于
Visstrim_M10 board uses an external microphone that can be enabled/disabled by the user Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Ryan Mallon 提交于
Both the Snapper CL15 and EDB93xx audio drivers set the same audio configuration in ep93xx_i2s_acquire. Remove the arguments to ep93xx_i2s_acquire so that the audio drivers no longer need the EP93XX_SYSCON defines exported. Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NRyan Mallon <rmallon@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
We only support I2C so no need to ifdef. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Manjunath Hadli 提交于
remove unnecessary inclusion of machine specific header file mach/dm365.h from cq93vc.c voice codec driver which comes in the way of platform code consolidation. Signed-off-by: NManjunath Hadli <manjunath.hadli@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Liam Girdwood 提交于
This is useful to create dummy codec devices where we need to have some DAI links without a real Codec. e.g. could be used to represent dumb FM, MODEM, etc This is also used by dynamic PCM for DAI links that have no codec. Signed-off-by: NLiam Girdwood <lrg@ti.com> [Fixed the indentation -- broonie] Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Liam Girdwood 提交于
Provide a method for mach drivers to query the HS DC offset step size in mV. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Liam Girdwood 提交于
Print out the offending DAI link entry when a naming error occurs. Makes thing easier to debug for machines with a large number of DAI links. Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Joachim Eastwood 提交于
Signed-off-by: NJoachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-