There is no need to send RNR immediately when entring local busy.
Also upper layer might clear local busy condition before ack timer
expires saving few cycles for sending RNR.

This also prevents sending two RNRs in some cases where sending one
would be enough i.e received N I-frame can trigger local busy
(sending RNR acking up to N-1 I-frame) and later sending ack (RNR
acking up to N I-frame).

This was affecting TC_ERM_BV_07_C and TC_ERM_BV_22_C with some non
default channel parameters (tx window and receiving buffer sizes).
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

ack_timer should be cleared when sending ACK to avoid acking I-frames
twice.

This commit introduces helper function (only send ack, not clearing
timer) which is used by l2cap_send_ack and l2cap_ack_timeout. This is
to avoid clearing ack timer in timer function.
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

SREJ frame with P-bit set acknowledges I-frames numbered up to
(ReqSeq - 1). With this patch P-bit in SREJ is set only when there are
some I-frames to ack.

This fixes ambiguous situation when lost of I-frame with TxSeq=0 would
result in sending SREJ acking all previous I-frames.
Consider following scenario:
TxWindow=3

HostA: sent I-frame TxSeq=0
HostA: sent I-frame TxSeq=1
HostA: sent I-frame TxSeq=2
HostB: missed I-frame TxSeq=0
HostB: received I-frame TxSeq=1
HostB: sent SREJ ReqSeq=0 Pbit=1
HostA: received SREJ ReqSeq=0 Pbit=1   <- All I-frames acked or not?
...
Signed-off-by: NSzymon Janc <szymon.janc@tieto.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Fix the following build warning:

  CC [M]  net/bluetooth/hci_core.o
net/bluetooth/hci_core.c: In function ‘__check_enable_hs’:
net/bluetooth/hci_core.c:2587: warning: return from incompatible pointer type

module_param in hci_core.c passes 'enable_hs' as bool format, so fix
this variable definition type.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch makes sure that devices with stronger signal (RSSI closer to
0) are sorted first in the resolve list and will therefore get their
names resolved first during device discovery. Since it's more likely
that the device the user is trying to discover has a strong signal due
to its proximity this ensures that the user gets the "device found"
event for it more quickly.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

The HCI_MGMT flag should not be cleared when resetting a HCI device.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

There's no point in exposing these to user-space (which is what happens
to everything in hdev->flags) so move them to dev_flags instead.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

As reported by Dan Carpenter this function causes a Sparse warning and
shouldn't be declared inline:

include/net/bluetooth/l2cap.h:837:30 error: marked inline, but without a
definition"
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

Since we remove the owner field of hci_dev hci_dev_put and __hci_dev_put
do the same so we can merge them into one function. Same for
hci_dev_hold and __hci_dev_hold.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

The hci_dev->dev device structure has an internal refcount. This
refcount is used to protect the whole hci_dev object. However, we
currently do not use it.  Therefore, if someone calls hci_free_dev() we
currently immediately destroy the hci_dev object because we never took
the device refcount.

This even happens if the hci_dev->refcnt is not 0. In fact, the
hci_dev->refcnt is totally useless in its current state. Therefore, we
simply remove hci_dev->refcnt and instead use hci_dev->dev refcnt.

This fixes all the symptoms and also correctly integrates the device
structure into our bluetooth bus system.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

After unregistering an hci_dev object a bluetooth driver does not have
any callbacks in the hci_dev structure left over. Therefore, there is no
need to keep a reference to the module.

Previously, we needed this to protect the hci-destruct callback.
However, this callback is no longer available so we do not need this
owner field, anymore.  Drivers now call hci_unregister_dev() and they
are done with the object.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

We provide a device-object to other subsystems and we provide our own
release-function. Therefore, the device-object must own a reference to
our module, otherwise the release-function may get deleted before the
device-object does.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Several drivers already provide an empty callback so we can actually
make this optional and then remove all those empty callbacks in the
drivers.

This callback isn't needed at all by most drivers as they can remove
their allocated structures on device disconnect and not on hci
destruction.
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Adds HCI_ACL_TX_TIMEOUT and clear conversion from msec to jiffies
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

After moving L2CAP timers to workqueues l2cap_set_timer expects timeout
value to be specified in jiffies but constants defined in miliseconds
are used. This makes timeouts unreliable when CONFIG_HZ is not set to
1000.

__set_chan_timer macro still uses jiffies as input to avoid multiple
conversions from/to jiffies for sk_sndtimeo value which is already
specified in jiffies.
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Ackec-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

sk_sndtime value should be specified in jiffies thus initial value
needs to be converted from miliseconds. Otherwise this timeout is
unreliable when CONFIG_HZ is not set to 1000.
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

Adds support for Number Of Completed Data Blocks Event.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch adds the necessary logic to perform name lookups after
inquiry completes. This is done by checking for entries in the resolve
list after each inquiry complete and remote name complete HCI event.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds proper state tracking to the device discovery process.
This makes it possible to return appropriate errors when trying to stop
a non-active discovery or start discovery when it is already ongoing.
Once name resolving is implemented this also makes it possible to know
what the right action to do is when a remote name lookup is cancelled.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

This struct is used for not just inquiry caching but also for general
device discovery state tracking so it's better to rename it to something
more appropriate.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

For the remote name state tracking for the management interface to work
the cache needs to be flushed whenever inquiry is started. The
hci_do_inquiry function is only used by the management interface so by
having the flushing done from it ensures that old ioctl based
functionality isn't affected.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

If user-space has already confirmed the name for a remote device we
shouldn't request confirmation again. The simplest way to do this is to
return the name state from hci_inquiry_cache_update (if it is anything
else than unknown then we do not need confirmation from user-space).
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds initial support for mgmt_confirm_name. It adds the
necessary tracking of the name state by extending the inquiry cache. The
actual name resolving operation (to be done once inquiry is finished) is
not yet part of this patch.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

The EIR defines are needed also outside of mgmt.c (e.g. in hci_event.c
to check if EIR data has the complete name) so it's better to have them
in a single public place, i.e. hci.h.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

This makes it possible to use the convenience functions provided for
standard kernel list types and it also makes it easier to extend the use
of the cache for the management interface where e.g. name resolving
control will be needed.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>

Remove unneeded skb_pull and correct packet length calculation
removing magic number. Move BT_DBG after len check otherwise
it could possibly access wrong memory.
Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Those vars need to be in sync, otherwise l2cap_core.c can get the wrong
state.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Those locks are not shared between interrupt and process context anymore,
so remove the part that disable interrupts.  We are still safe because
preemption is disabled.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Stop Discovery Command Status Event should use mgmt status code.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Acked-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

This patch queues hdev->adv_work on the system-wide workqueue
instead of on hdev->workqueue. This way we keep only tx/rx works
on hdev->workqueue.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

This patch fixes the adv_work delay. It should be set to ADV_
CLEAR_TIMEOUT instead of (jiffies + ADV_CLEAR_TIMEOUT) since
queue_delayed_work() receives the number of jiffies to wait
before queueing. It also removes the unnecessary cancel_delayed_
work_sync() call in case LE scan has been disabled.
Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Copy the Features value according to the Page number.
Signed-off-by: NAndre Guedes <aguedespe@gmail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

This patch renames hdev->extfeatures to hdev->host_features since it
holds the extended features Page 1 (aka host features).
Signed-off-by: NAndre Guedes <aguedespe@gmail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

We don't need it anymore.
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Everything is in process context now, we do not need such a call.
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Those locks are not shared between interrupt and process context anymore,
so remove the part that disable interrupts. We are still safe because
preemption is disabled.
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

We now run in process context, no need to disable interrupts.
Calls from the tty layer also run in process context.

rw_lock was converted to spinlock, we have more writers than readers in
this case.
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

Code now run in process context, does not need to disable interrupt
anymore.
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

It should be the dst in the copy not src. 03a00194 introduced this bug.
Reported-by: NVinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

sock and sk were leftover from another change.
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>