- 05 8月, 2006 5 次提交
-
-
由 Tejun Heo 提交于
In the error path, ata_device_add() * dereferences null host_set->ports[] element. * calls scsi_remove_host() on not-yet-added shost. This patch fixes both bugs. The first problem was spotted and initial patch submitted by Dave Jones <davej@redhat.com>. The second problem was mentioned and fixed by Jeff Garzik <jgarzik@pobox.com> in a larger cleanup patch. Cc: Dave Jones <davej@redhat.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NTejun Heo <htejun@gmail.com>
-
由 Jeff Garzik 提交于
(tj: this is for the following ata_device_add() fix) Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NTejun Heo <htejun@gmail.com>
-
由 Tejun Heo 提交于
sata_sil24 doesn't make use of probe_ent->mmio_base and setting this field causes the area to be released twice on detach. Don't set probe_ent->mmio_base. Signed-off-by: NTejun Heo <htejun@gmail.com>
-
由 Tejun Heo 提交于
To get host_set->private_data initialized reliably, all pinfos need to point to the same hpriv. Restore pinfo->private_data after pata pinfo assignment. Signed-off-by: NTejun Heo <htejun@gmail.com>
-
由 Tejun Heo 提交于
ata_prot_detach() did nothing for old EH ports and thus SCSI hosts associated with those ports are left dangling after they are detached leaving stale devices and causing oops eventually. Make ata_port_detach() remove SCSI hosts for old EH ports. Signed-off-by: NTejun Heo <htejun@gmail.com>
-
- 04 8月, 2006 1 次提交
-
-
由 Unicorn Chang 提交于
Skip protocol test altogether in spurious interrupt code. If PIOS is received when it shouldn't, ahci will raise protocol violation. Signed-off-by: NUnicorn Chang <uchang@tw.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 01 8月, 2006 1 次提交
-
-
由 Sam Ravnborg 提交于
When we introduced -rR then aic7xxx no loger could pick up definition of YACC&LEX from make - so do it explicit now. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 28 7月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
HAL and friends have a tendency to trigger this one all the time. It's not really interesting, so kill it. The vendor kernels all do anyways. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 26 7月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
This fixes three drivers to compile again after my patch that removes the data_cmnd member from struct scsi_cmnd. The fas216 change is trivial, it should have been using ->cmnd all the time. NCR53C9 (which seem to be mostly duplicate driver with esp.c!) is doing something odd, it should only have looked at ->cmnd before not the saved copy that is kept for the error handlers sake. Note that it really should deal with the sync setting themselves but use the generic domain validation code that get this right - but that's for later let's push this simple compile fix for now. And sorry for the late fix for this, I have been busy with OLS and associated activities last week. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 7月, 2006 1 次提交
-
-
由 David S. Miller 提交于
The data_cmd[] member got deleted, so do not use it any more. Scsi commands do not have their ->cmd[] overwritten temporary to probe for status after an error before retrying. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 7月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
This is just the for-RC fix. A 'TODO' command is added, describing what's needed for the more-complete fix.
-
- 20 7月, 2006 3 次提交
-
-
由 Tejun Heo 提交于
Update ata_eh_about_to_do() and ata_eh_done() to improve EH action and EHI flag handling. * There are two types of EHI flags - one which expires on successful EH and the other which expires on a successful reset. Make this distinction clear. * Unlike other EH actions, reset actions are represented by two EH action masks and a EHI modifier. Implement correct about_to_do/done semantics for resets. That is, prior to reset, related EH info is sucked in from ehi and cleared, and after reset is complete, related EH info in ehc is cleared. These changes improve consistency and remove unnecessary EH actions caused by stale EH action masks and EHI flags. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
* (ata_dev_absent() || ata_dev_ready()) test doesn't indicate SUSPENDED state properly. Fix it. * Link resuming resets shouldn't be skipped. Don't skip recovery on EHI_RESUME_LINK. This doesn't matter for host ports as EHI_RESUME always coincides with EHI_HOTPLUGGED which makes attached disabled devices vacant. However, PMP reset causes non-hotplug link-resuming resets which shouldn't be skipped. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Commit 0662c58b updated ata_eh_autopsy() to OR determined action to ehc->i.action to preserve action mask set directly into ehc->i.action by nested functions. This broke action mask clearing on SENSE_VALID case causing revalidation and EH complete message on successful ATAPI CC. This patch removes two local variables - action and failed_dev - which cache ehc->i.action and ehc->i.dev respectively, and make the function directly modify ehc->i.* fields to remove aliasing issues. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 7月, 2006 5 次提交
-
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
* delete unused PIIX_FLAG_COMBINED* * port_enable should be u16 rather than u32 Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Take into account the fact that ICH8 changed the register layout of the MAP and PCS register bits. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Prior to this patch, the driver would do this for each port: read 8-bit PCS write 8-bit PCS read 8-bit PCS write 8-bit PCS In the field, flaky behavior has been observed related to this register. In particular, these overzealous register writes can cause misdetection problems. Update to do the following once (not once per port) at boot: read 16-bit PCS if needs changing, write 16-bit PCS And thereafter, we only perform a 'read 16-bit PCS' per port. This should eliminate all PCS writes in many cases, and be more friendly in the cases where we do need to enable ports. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Add host_set private structure piix_host_priv. Currently the only field is ->map which used to be stored directly at host_set->private_data. This change allows more host_set private fields to be added. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 14 7月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
Seem like quite a few splipped through the cracks. Here's a patch to update all references I could find: Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 13 7月, 2006 1 次提交
-
-
由 James Bottomley 提交于
Apparently the D700 has had an argument ordering issue for quite a while which can cause it to get the wrong scsi_id (I just got an unbootable voyager system because of this). Hopefully this patch also fixes up all the sectional mismatches within the driver. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 12 7月, 2006 3 次提交
-
-
由 Randy Dunlap 提交于
Check all __must_check warnings in scsi_debug. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDouglas Gilbert <dougg@torque.net> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
Using the port_id for the channel is completely unnecessary since the host_id/target_id are constructed to be globally unique. Also move the mptsas driver on to virtual channel 1 for its raid devices. Acked-by: N"Moore, Eric" <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
This patch adds the ability to add a backlink to a particular port. The idea is to represent properly ports on expanders that are used specifically for linking to the parent device in the topology. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 11 7月, 2006 1 次提交
-
-
由 David Howells 提交于
Move the roundup() macro from binfmt_elf.c into linux/kernel.h as it's generally useful. [akpm@osdl.org: nuke all the other implementations] Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 7月, 2006 6 次提交
-
-
由 Christoph Hellwig 提交于
Currently struct scsi_cmnd has various fields that are used to backup original data after the corresponding fields have been overridden for EH commands. This means drivers can easily get at it and misuse it. Due to the old_ naming this doesn't happen for most of them, but two that have different names have been used wrong a lot (see previous patch). Another downside is that they unessecarily bloat the scsi_cmnd size. This patch moves them onstack in scsi_send_eh_cmnd to fix those two issues aswell as allowing future EH fixes like moving the EH command submissions to use SG lists like everything else. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Dave C Boutcher 提交于
Without this patch we register an interrupt with request_irq, but then return a bad return code from the module probe. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Dave C Boutcher 提交于
Allocate the correct number of lp events when running ibmvscsi on legacy iseries Signed-off-by: NDave Boutcher <sleddog@us.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Matthew Wilcox 提交于
Remove last vestiges of the reverse_scan paramater from aic7xxx and aic79xx. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Stop poking into the old_ & co scsi_cmnd fields that should only be used in the EH code. Untested, but this is required to move ahead with the EH fixes. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Luben Tuikov 提交于
Convert this: st0: Error with sense data: <6>st: Current: sense key: Illegal Request Additional sense: Invalid field in cdb To this: st0: Current: sense key: Illegal Request Additional sense: Invalid field in cdb Signed-off-by: NLuben Tuikov <ltuikov@yahoo.com> Acked-by: NKai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 09 7月, 2006 9 次提交
-
-
由 James Smart 提交于
Change version number to 8.1.7 Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Misc Fixes: - Fix some sparse warnings - casts of address space - Fix handling of the adapter registration string. Each invocation was byteswapping, so every other adapter init attempt failed. - Correct comments and default value for the lpfc_max_luns parameter Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Add lpfc_sli_flush_mbox_queue() function and use it in lpfc_offline() call to avoid deadlock on thread block. Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Correct the wait in attachment that delays for topology discovery Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Remove depricated sysfs attribute board_online, as it's replaced by the new issue_reset attribute Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Adding new issue_reset sysfs attribute Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Fix panic in lpfc_sli_validate_fcp_iocb due to access of scsi_cmnd after returning it to the midlayer Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Consolidate dma buf cleanup into a separate function Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Smart 提交于
Correct bogus nodev_tmo message on NPort that changes its NPort Id Signed-off-by: NJames Smart <James.Smart@emulex.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-