- 12 2月, 2013 3 次提交
-
-
由 Subhash Jadavani 提交于
When SDIO3.0 card is detected, incorrect bus speed mode is printed as part of card detection print in kernel logs. This change fixes it so that user won't be confused by looking at incorrect card detection message in logs. Signed-off-by: NSubhash Jadavani <subhashj@codeaurora.org> Tested-by: NJackey Shen <Jackey.Shen@amd.com> Acked-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Sujit Reddy Thumma 提交于
According to UHS-I initialization sequence for SDIO 3.0 cards, the host must set bit[24] (S18R) of OCR register during OCR handshake to know whether the SDIO card is capable of doing 1.8V I/O. Signed-off-by: NSujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: NSubhash Jadavani <subhashj@codeaurora.org> Reviewed-by: NJohan Rudholm <johan.rudholm@stericsson.com> Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
由 Subhash Jadavani 提交于
If SDIO keep power flag (MMC_PM_KEEP_POWER) is not set, card would be reinitialized during resume but as we are not resetting (CMD52 reset) the SDIO card during this reinitialization, card may fail to respond back to subsequent commands (CMD5 etc...). This change resets the card before the reinitialization of card during resume. Signed-off-by: NSubhash Jadavani <subhashj@codeaurora.org> Acked-by: NUlf Hansson <ulf.hansson@linaro.org> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 01 2月, 2013 1 次提交
-
-
由 Benjamin Tissoires 提交于
i2c_hid_output_raw_report is used by hidraw to forward set_report requests. The current implementation of i2c_hid_set_report needs to take the report_id as an argument. The report_id is stored in the first byte of the buffer in argument of i2c_hid_output_raw_report. Not removing the report_id from the given buffer adds this byte 2 times in the command, leading to a non working command. Reported-by: NAndrew Duggan <aduggan@synaptics.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 1月, 2013 4 次提交
-
-
由 Alasdair G Kergon 提交于
When processing write same requests, fix dm to send the configured number of WRITE SAME requests to the target rather than the number of discards, which is not always the same. Device-mapper WRITE SAME support was introduced by commit 23508a96 ("dm: add WRITE SAME support"). Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Acked-by: NMike Snitzer <snitzer@redhat.com>
-
由 Mike Snitzer 提交于
thin_io_hints() is blindly copying the queue limits from the thin-pool which can lead to incorrect limits being set. The fix here simply deletes the thin_io_hints() hook which leaves the existing stacking infrastructure to set the limits correctly. When a thin-pool uses an MD device for the data device a thin device from the thin-pool must respect MD's constraints about disallowing a bio from spanning multiple chunks. Otherwise we can see problems. If the raid0 chunksize is 1152K and thin-pool chunksize is 256K I see the following md/raid0 error (with extra debug tracing added to thin_endio) when mkfs.xfs is executed against the thin device: md/raid0:md99: make_request bug: can't convert block across chunks or bigger than 1152k 6688 127 device-mapper: thin: bio sector=2080 err=-5 bi_size=130560 bi_rw=17 bi_vcnt=32 bi_idx=0 This extra DM debugging shows that the failing bio is spanning across the first and second logical 1152K chunk (sector 2080 + 255 takes the bio beyond the first chunk's boundary of sector 2304). So the bio splitting that DM is doing clearly isn't respecting the MD limits. max_hw_sectors_kb is 127 for both the thin-pool and thin device (queue_max_hw_sectors returns 255 so we'll excuse sysfs's lack of precision). So this explains why bi_size is 130560. But the thin device's max_hw_sectors_kb should be 4 (PAGE_SIZE) given that it doesn't have a .merge function (for bio_add_page to consult indirectly via dm_merge_bvec) yet the thin-pool does sit above an MD device that has a compulsory merge_bvec_fn. This scenario is exactly why DM must resort to sending single PAGE_SIZE bios to the underlying layer. Some additional context for this is available in the header for commit 8cbeb67a ("dm: avoid unsupported spanning of md stripe boundaries"). Long story short, the reason a thin device doesn't properly get configured to have a max_hw_sectors_kb of 4 (PAGE_SIZE) is that thin_io_hints() is blindly copying the queue limits from the thin-pool device directly to the thin device's queue limits. Fix this by eliminating thin_io_hints. Doing so is safe because the block layer's queue limits stacking already enables the upper level thin device to inherit the thin-pool device's discard and minimum_io_size and optimal_io_size limits that get set in pool_io_hints. But avoiding the queue limits copy allows the thin and thin-pool limits to be different where it is important, namely max_hw_sectors_kb. Reported-by: NDaniel Browning <db@kavod.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Matt Fleming 提交于
It has been reported that running this driver on some Samsung laptops with EFI can cause those machines to become bricked as detailed in the following report, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 There have also been reports of this driver causing Machine Check Exceptions on recent EFI-enabled Samsung laptops, https://bugzilla.kernel.org/show_bug.cgi?id=47121 So disable it if booting from EFI since this driver relies on grovelling around in the BIOS memory map which isn't going to work. Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 Matt Fleming 提交于
Originally 'efi_enabled' indicated whether a kernel was booted from EFI firmware. Over time its semantics have changed, and it now indicates whether or not we are booted on an EFI machine with bit-native firmware, e.g. 64-bit kernel with 64-bit firmware. The immediate motivation for this patch is the bug report at, https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 which details how running a platform driver on an EFI machine that is designed to run under BIOS can cause the machine to become bricked. Also, the following report, https://bugzilla.kernel.org/show_bug.cgi?id=47121 details how running said driver can also cause Machine Check Exceptions. Drivers need a new means of detecting whether they're running on an EFI machine, as sadly the expression, if (!efi_enabled) hasn't been a sufficient condition for quite some time. Users actually want to query 'efi_enabled' for different reasons - what they really want access to is the list of available EFI facilities. For instance, the x86 reboot code needs to know whether it can invoke the ResetSystem() function provided by the EFI runtime services, while the ACPI OSL code wants to know whether the EFI config tables were mapped successfully. There are also checks in some of the platform driver code to simply see if they're running on an EFI machine (which would make it a bad idea to do BIOS-y things). This patch is a prereq for the samsung-laptop fix patch. Cc: David Airlie <airlied@linux.ie> Cc: Corentin Chary <corentincj@iksaif.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Peter Jones <pjones@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Steve Langasek <steve.langasek@canonical.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@vger.kernel.org> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 30 1月, 2013 4 次提交
-
-
由 Joe Perches 提交于
First number, then size. Signed-off-by: NJoe Perches <joe@perches.com> Cc: <stable@vger.kernel.org> Signed-off-by: NBorislav Petkov <bp@suse.de>
-
由 Dan Carpenter 提交于
We're testing for ->show but calling ->store(). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: NBorislav Petkov <bp@suse.de>
-
由 Arnd Bergmann 提交于
nmk_prcm_gpiocr_get_mode is only needed for debugfs output at the moment, which can be compile-time disabled. Marking the function __maybe_unused still gives us compile-time coverage, but avoids a gcc warning. Without this patch, building nhk8815_defconfig results in: drivers/pinctrl/pinctrl-nomadik.c:676:12: warning: 'nmk_prcm_gpiocr_get_mode' defined but not used [-Wunused-function] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Jean-Nicolas Graux <jean-nicolas.graux@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Arnd Bergmann 提交于
Functions called from a driver probe() method must not be marked __init, because they may get called after the init phase is done, when the device shows up late, or because of deferred probing. Without this patch, building exynos_defconfig results in multiple warnings like: WARNING: drivers/pinctrl/built-in.o(.text+0x51bc): Section mismatch in reference from the function exynos5440_pinctrl_probe() to the function .init.text:exynos5440_gpiolib_register() The function exynos5440_pinctrl_probe() references the function __init exynos5440_gpiolib_register(). This is often because exynos5440_pinctrl_probe lacks a __init annotation or the annotation of exynos5440_gpiolib_register is wrong. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Tomasz Figa <t.figa@samsung.com> Acked-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 28 1月, 2013 6 次提交
-
-
由 Suravee Suthikulpanit 提交于
The IOMMU may stop processing page translations due to a perceived lack of credits for writing upstream peripheral page service request (PPR) or event logs. If the L2B miscellaneous clock gating feature is enabled the IOMMU does not properly register credits after the log request has completed, leading to a potential system hang. BIOSes are supposed to disable L2B micellaneous clock gating by setting L2_L2B_CK_GATE_CONTROL[CKGateL2BMiscDisable](D0F2xF4_x90[2]) = 1b. This patch corrects that for those which do not enable this workaround. Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com> Acked-by: NBorislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Signed-off-by: NJoerg Roedel <joro@8bytes.org>
-
由 Peter Korsgaard 提交于
dm9620 is a newer variant of dm9601 with more features (usb 2.0, checksum offload, ..), but it can also be put in a dm9601 compatible mode, allowing us to reuse the existing driver. This does mean that the extended features like checksum offload cannot be used, but that's hardly critical on a 100mbps interface. Thanks to Sławek Wernikowski <slawek@wernikowski.net> for providing me with a dm9620 based device to test. Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch fixes the setting of the INTR pin that is valid for IP101 A/G device and not for the IP1001. Reported-by: NAnunay Saxena <anunay.saxena@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stuart Menefy 提交于
Like several other PHY devices which support RGMII, the IC+1001 allows additional delays to by added to the RX_CLK and TX_CLK signals to compensate for skew between the clock and data signals. Previously this was always enabled, but this change makes use of the different RGMII interface modes to allow the user to specify whether this should be enabled. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 françois romieu 提交于
Control of receive descriptor must not be returned to ethernet chipset before vlan tag processing is done. VLAN tag receive word is now reset both in normal and error path. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Spotted-by: NTimo Teras <timo.teras@iki.fi> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
commit 9992c2e2 (net: cdc_ncm: workaround for missing CDC Union) added code to lookup an IAD for the interface we are probing. This is redundant. The USB core has already done the lookup and saved the result in the USB interface struct. Use that instead. Cc: Greg Suarez <gsuarez@smithmicro.com> Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2013 14 次提交
-
-
由 Eric Dumazet 提交于
Ben Greear reported crashes in ip_rcv_finish() on a stress test involving many macvlans. We tracked the bug to a dst use after free. ip_rcv_finish() was calling dst->input() and got garbage for dst->input value. It appears the bug is in loopback driver, lacking a skb_dst_force() before calling netif_rx(). As a result, a non refcounted dst, normally protected by a RCU read_lock section, was escaping this section and could be freed before the packet being processed. [<ffffffff813a3c4d>] loopback_xmit+0x64/0x83 [<ffffffff81477364>] dev_hard_start_xmit+0x26c/0x35e [<ffffffff8147771a>] dev_queue_xmit+0x2c4/0x37c [<ffffffff81477456>] ? dev_hard_start_xmit+0x35e/0x35e [<ffffffff8148cfa6>] ? eth_header+0x28/0xb6 [<ffffffff81480f09>] neigh_resolve_output+0x176/0x1a7 [<ffffffff814ad835>] ip_finish_output2+0x297/0x30d [<ffffffff814ad6d5>] ? ip_finish_output2+0x137/0x30d [<ffffffff814ad90e>] ip_finish_output+0x63/0x68 [<ffffffff814ae412>] ip_output+0x61/0x67 [<ffffffff814ab904>] dst_output+0x17/0x1b [<ffffffff814adb6d>] ip_local_out+0x1e/0x23 [<ffffffff814ae1c4>] ip_queue_xmit+0x315/0x353 [<ffffffff814adeaf>] ? ip_send_unicast_reply+0x2cc/0x2cc [<ffffffff814c018f>] tcp_transmit_skb+0x7ca/0x80b [<ffffffff814c3571>] tcp_connect+0x53c/0x587 [<ffffffff810c2f0c>] ? getnstimeofday+0x44/0x7d [<ffffffff810c2f56>] ? ktime_get_real+0x11/0x3e [<ffffffff814c6f9b>] tcp_v4_connect+0x3c2/0x431 [<ffffffff814d6913>] __inet_stream_connect+0x84/0x287 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff8108d695>] ? _local_bh_enable_ip+0x84/0x9f [<ffffffff8108d6c8>] ? local_bh_enable+0xd/0x11 [<ffffffff8146763c>] ? lock_sock_nested+0x6e/0x79 [<ffffffff814d6b38>] ? inet_stream_connect+0x22/0x49 [<ffffffff814d6b49>] inet_stream_connect+0x33/0x49 [<ffffffff814632c6>] sys_connect+0x75/0x98 This bug was introduced in linux-2.6.35, in commit 7fee226a (net: add a noref bit on skb dst) skb_dst_force() is enforced in dev_queue_xmit() for devices having a qdisc. Reported-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wanlong Gao 提交于
Add a cpu notifier to virtio-net, so that we can reset the virtqueue affinity if the cpu hotplug happens. It improve the performance through enabling or disabling the virtqueue affinity after doing cpu hotplug. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wanlong Gao 提交于
Split out the clean affinity function to virtnet_clean_affinity(). Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wanlong Gao 提交于
As Michael mentioned, set affinity and select queue will not work very well when CPU IDs are not consecutive, this can happen with hot unplug. Fix this bug by traversal the online CPUs, and create a per cpu variable to find the mapping from CPU to the preferable virtual-queue. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Eric Dumazet <erdnetdev@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: virtualization@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei WANG 提交于
If rtsx_pci_sdmmc is not probed, function pointer pcr->slots[].card_event will point to NULL, and thus rtsx_pci_card_detect will reference a NULL pointer. Check card_event pointer before referencing it can avoid kernel panic. Signed-off-by: NWei WANG <wei_wang@realsil.com.cn> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Mark Brown 提交于
Updated in latest datasheet. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Arnd Bergmann 提交于
If the twl4030_write_script function gets called with a zero length argument, its return value does not get set. We know that all scripts have a nonzero length, but returning an error in case they ever do is probably appropriate. Without this patch, building omap2plus_defconfig results in: drivers/mfd/twl4030-power.c: In function 'load_twl4030_script': drivers/mfd/twl4030-power.c:414:5: error: 'err' may be used uninitialized in this function Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: NAmit Kucheria <amit.kucheria@linaro.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: "Kristo, Tero" <t-kristo@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Ashish Jangam 提交于
An issue has been reported where the PMIC either locks up or fails to respond following a system Reset. This could result in a second write in which the bus writes the current content of the write buffer to address of the last I2C access. The failure case is where this unwanted write transfers incorrect data to a critical register. This patch fixes this issue to by following any read or write with a dummy read to a safe register address. A safe register address is one where the contents will not affect the operation of the system. Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Wei WANG 提交于
Add callback function conv_clk_and_div_n to convert between SSC clock and its divider N. For rtl8411, the formula to calculate SSC clock divider N is different with the other card reader models. Signed-off-by: NWei WANG <wei_wang@realsil.com.cn> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Wei WANG 提交于
Different card reader has different method to switch output voltage, so we have to use the callback function provided by MFD driver to switch output pad voltage. Signed-off-by: NWei WANG <wei_wang@realsil.com.cn> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Wei WANG 提交于
Different card reader has different method to switch output voltage, add this callback to let the card reader implement its individual switch function. This is needed as rtl8411 has a specific switch output voltage procedure. Signed-off-by: NWei WANG <wei_wang@realsil.com.cn> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Olivier Sobrie 提交于
Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Olivier Sobrie 提交于
Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable <stable@vger.kernel.org> Cc: Anant Gole <anantgole@ti.com> Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Olivier Sobrie 提交于
Errors in CAN protocol (location) are reported in data[3] of the can frame instead of data[2]. Cc: linux-stable <stable@vger.kernel.org> Cc: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: NOlivier Sobrie <olivier@sobrie.be> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
- 26 1月, 2013 2 次提交
-
-
由 Axel Lin 提交于
regulator_register() does not return NULL, it returns ERR_PTR on error. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Steven Rostedt 提交于
Building for the snowball board, I ran into this compile failure: CC drivers/regulator/dbx500-prcmu.o arm-test.git/drivers/regulator/dbx500-prcmu.c:119:11: error: 'THIS_MODULE' undeclared here (not in a function) make[3]: *** [drivers/regulator/dbx500-prcmu.o] Error 1 make[2]: *** [drivers/regulator] Error 2 Commit 38e96838 "regulators/db8500: split off shared dbx500 code" separated out the dbx500 code but did not copy over the required include to linux/module.h. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 1月, 2013 6 次提交
-
-
由 Shirish S 提交于
V2: Add mutex protection, while read. The hdmi and mixer win_commit calls currently are not checking the status of IP before updating the respective registers, this patch adds this check. Signed-off-by: NShirish S <s.shirish@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_hdmi.c:111:13: warning: symbol 'drm_hdmi_get_edid' was not declared. Should it be static? Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Arnd Bergmann 提交于
While the exynos DRM support in principle can work on multiplatform, the FIMD and IPP sections of it both include the plat/map-base.h header file, which is not available on multiplatform. Rather than disabling the entire driver, we can just conditionally build these two parts. Without this patch, building allyesconfig results in: drivers/gpu/drm/exynos/exynos_drm_fimc.c:19:27: fatal error: plat/map-base.h: No such file or directory drivers/gpu/drm/exynos/exynos_drm_ipp.c:20:27: fatal error: plat/map-base.h: No such file or directory Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Arnd Bergmann 提交于
Patch 9eb3e9e6 "drm/exynos: add support for ARCH_MULTIPLATFORM" allowed building the exynos hdmi driver on non-samsung platforms, which unfortunately broke compilation in combination with 22c4f428 "drm: exynos: hdmi: add support for exynos5 hdmi", which added an inclusion of the samsung-specific plat/gpio-cfg.h header file. Fortunately, that header file is not required any more here, so we can simply revert the inclusion in order to build the ARM allyesconfig again without getting this error: drivers/gpu/drm/exynos/exynos_hdmi.c:37:27: fatal error: plat/gpio-cfg.h: No such file or directory Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Sean Paul 提交于
Remove the "internal" interrupt handling since it's never invoked and remove "external" reference. This patch removes a bunch of dead code and clarifies how hotplugging is handled in the HDMI driver. Signed-off-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sachin Kamat 提交于
Fixes the following warnings: drivers/gpu/drm/exynos/exynos_drm_rotator.c:737:24: warning: symbol 'rot_limit_tbl' was not declared. Should it be static? drivers/gpu/drm/exynos/exynos_drm_rotator.c:754:27: warning: symbol 'rotator_driver_ids' was not declared. Should it be static? Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-