- 05 10月, 2006 32 次提交
-
-
由 Mark Assad 提交于
There is a bug in the current version of the itmtouch USB touchscreen driver. The if statment that checks if pressure is being applied to the touch screen is now missing a ! (not), so events are no longer being reported correctly. The original source code for this line was as follows: #define UCP(x) ((unsigned char*)(x)) #define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z)) ... if (!UCOM(urb, 7, 0x20)) { And was cleaned to: unsigned char *data = urb->transfer_buffer; .... if (data[7] & 0x20) { (note the lack of '!') This has been tested on an LG L1510BF and an LG1510SF touch screen. Signed-off-by: NMark Assad <massad@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matthew Wilcox 提交于
klist_iter_exit() only takes one parameter. Also fix warning by adding additional brackets. Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
-
由 David Somayajulu 提交于
open-iSCSI driver for Qlogic Corporation's iSCSI HBAs Signed-off-by: NRavi Anand <ravi.anand@qlogic.com> Signed-off-by: NDavid Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NDoug Maxey <dwm@bubba.enoyolf.org> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
- handle clear_user() error - handle and properly unwind from sysfs errors thrown during mod init - adjust order of calls in megasas_exit() to precisely match registration order in megasas_init() Signed-off-by: NJeff Garzik <jeff@garzik.org> Updated for extra attribute and Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
Handle and unwind from errors returned by driver model functions. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
- Notice and handle sysfs errors in module init, tape init - Properly unwind errors in module init - Remove bogus st_sysfs_class==NULL test, it is guaranteed !NULL at that point Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
- Properly handle and unwind errors in init_sd(). Fixes leaks on error, if class_register() or scsi_register_driver() failed. - Ensure that exit_sd() execution order is the perfect inverse of initialization order. FIXME: If some-but-not-all register_blkdev() calls fail, we wind up calling unregister_blkdev() for block devices we did not register. This was a pre-existing bug. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
- check all sysfs-related return codes, and propagate them back to callers - properly unwind errors in osst_probe(), init_osst(). This fixes a leak that occured if scsi driver registration failed, and fixes an oops if sysfs creation returned an error. (unrelated) - kzalloc() cleanup in new_tape_buf() Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Henne 提交于
Remove the obsolete hosts.h file under drivers/scsi. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Henne 提交于
Changes the obsolete Scsi_Cmnd to struct scsi_cmnd in aic7xxx_old.c. Also replacing lots of whitespaces with tabs in structures and functions which have been changed. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Peter Oberparleiter 提交于
Retry internal operation after unit check instead of aborting them. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Add timeout handler for common-I/O-layer-internal I/O operations. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Ralph Wuerthner 提交于
Fix a race condition during AP device registration and unregistration. Signed-off-by: NRalph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
While the machine owns us an interrupt in these cases (and we should get one), reality isn't always like that... Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sumant Patro 提交于
This patch sets timeout of max 180 seconds for ioctl completion. It also updates the Changelog and hikes the version to 3.05. Signed-off-by: NSumant Patro <Sumant.Patro@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Sumant Patro 提交于
This patch adds a tasklet for command completion. Signed-off-by: NSumant Patro <Sumant.Patro@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Sumant Patro 提交于
This patch adds function to print the pending frame details before returning failure from the reset routine. It also exposes a new variable megasas_dbg_lvl that allows the user to set the debug level for logging. Signed-off-by: NSumant Patro <Sumant.Patro@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Sumant Patro 提交于
This patch adds function pointer to invoke disable interrupt for xscale and ppc IOP based controllers. Removes old implementation that checks for controller type in megasas_disable_intr. Signed-off-by: NSumant Patro <Sumant.Patro@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Sumant Patro 提交于
This patch removes duplicated code in frame calculation & adds megasas_get_frame_count() that also takes into account the number of frames that can be contained in the Main frame. FW uses the frame count to pull sufficient number of frames from host memory. Signed-off-by: NSumant Patro <Sumant.Patro@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Sumant Patro 提交于
This patch has the following enhancements : a. handles new transition states of FW to support controller hotplug. b. It reduces by 1 the maximum cmds that the driver may send to FW. c. Sends "Stop Processing" cmd to FW before returning failure from reset routine d. Adds print in megasas_transition routine e. Sends "RESET" flag to FW to do a soft reset of controller to move from Operational to Ready state. f. Sending correct pointer (cmd->sense) to pci_pool_free Signed-off-by: NSumant Patro <Sumant.Patro@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Haavard Skinnemoen 提交于
The atmel_console_get_options() function initializes the baud, parity and bits settings from the actual hardware setup, in case it has been initialized by a e.g. boot loader. The baud rate, however, is not necessarily exactly equal to one of the standard baud rates (115200, etc.) This means that the baud rate calculated by this function may be slightly higher or slightly lower than one of the standard baud rates. If the baud rate is slightly lower than the target, this causes problems when uart_set_option() tries to match the detected baud rate against the standard baud rate, as it will always select a baud rate that is lower or equal to the target rate. For example if the detected baud rate is slightly lower than 115200, usart_set_options() will select 57600. This patch fixes the problem by subtracting 1 from the value in BRGR when calculating the baud rate. The detected baud rate will thus always be higher than the nearest standard baud rate, and uart_set_options() will end up doing the right thing. Tested on ATSTK1000 and AT91RM9200-EK boards. Both are broken without this patch. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Make CONFIG_SERIAL_ATMEL selectable on AVR32 and #ifdef out some ARM- specific code in the driver. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
In order to initialize the serial console early, the atmel_serial driver had to do a hack where it compared the physical address of the port with an address known to be permanently mapped, and used it as a virtual address. This got around the limitation that ioremap() isn't always available when the console is being initalized. This patch removes that hack and replaces it with a new "regs" field in struct atmel_uart_data that the board-specific code can initialize to a fixed virtual mapping for platform devices where this is possible. It also initializes the DBGU's regs field with the address the driver used to check against. On AVR32, the "regs" field is initialized from the physical base address when this it can be accessed through a permanently 1:1 mapped segment, i.e. the P4 segment. If regs is NULL, the console initialization is delayed until the "real" driver is up and running and ioremap() can be used. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Rename at91_register_uart_fns and associated structs and variables to make it consistent with the atmel_ prefix used by the rest of the driver. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
The at91_serial driver can be used with both AT32 and AT91 devices from Atmel and has therefore been renamed atmel_serial. The only thing left is to rename PORT_AT91 PORT_ATMEL. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Prefix all internal functions and variables with atmel_ instead of at91_. The at91_register_uart_fns() stuff is left as is since I can't find any actual users of it. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Rename the following public definitions: * AT91_NR_UART -> ATMEL_MAX_UART * struct at91_uart_data -> struct atmel_uart_data * at91_default_console_device -> atmel_default_console_device Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Rename the "at91_usart" platform driver "atmel_usart" and update platform devices accordingly. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Rename the following Kconfig symbols: * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Rename at91_serial.c atmel_serial.c Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Haavard Skinnemoen 提交于
Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename it atmel_usart.h. Also delete AVR32's version of this file. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NAndrew Victor <andrew@sanpeople.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 10月, 2006 8 次提交
-
-
由 Alan Cox 提交于
This fixes support for rev c8 of the ALi/ULi PATA, and keeps pcmcia in sync so ide_cs and pata_pcmcia are interchangable, both are only changes to constants. Right now rev 0xC8 and higher don't work with libata but 0xc8 is in the field now. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
Fix obvious build breakage revealed by 'make allyesconfig' in current -git. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Stern 提交于
This patch (as762) changes the cpufreq_transition_notifier_list from a blocking_notifier_head to an srcu_notifier_head. This will prevent errors caused attempting to call down_read() to access the notifier chain at a time when interrupts must remain disabled, during system suspend. It's not clear to me whether this is really necessary; perhaps the chain could be made into an atomic_notifier. However a couple of the callout routines do use blocking operations, so this approach seems safer. The head of the notifier chain needs to be initialized before use; this is done by an __init routine at core_initcall time. If this turns out not to be a good choice, it can easily be changed. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
This moves the declarations for the architecture helpers into include/linux/htirq.h from the generic include/linux/pci.h. Hopefully this will make this distinction clearer. htirq.h is included where it is needed. The dependency on the msi code is fixed and removed. The Makefile is tidied up. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
This is just a few makefile tweaks and some file renames. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
The logic works like this. Since we no longer track the state logic by hand in msi.c startup and shutdown are no longer needed. By updating msi_set_mask_bit to work on msi devices that do not implement a mask bit we can always call the mask/unmask functions. What we really have are mask and unmask so we use them to implement the .mask and .unmask functions instead of .enable and .disable. By switching to the handle_edge_irq handler we only need an ack function that moves the irq if necessary. Which removes the old end and ack functions and their peculiar logic of sometimes disabling an irq. This removes the reliance on pre genirq irq handling methods. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
Currently msi.c is doing sanity checks that make certain before an irq is destroyed it has no more users. By adding irq_has_action I can perform the test is a generic way, instead of relying on a msi specific data structure. By performing the core check in dynamic_irq_cleanup I ensure every user of dynamic irqs has a test present and we don't free resources that are in use. In msi.c this allows me to kill the attrib.state member of msi_desc and all of the assciated code to maintain it. To keep from freeing data structures when irq cleanup code is called to soon changing dyanamic_irq_cleanup is insufficient because there are msi specific data structures that are also not safe to free. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-