Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 13 4月, 2006 8 次提交
  3. 11 4月, 2006 3 次提交
  5. 01 4月, 2006 3 次提交
  7. 31 3月, 2006 14 次提交
  9. 30 3月, 2006 8 次提交
    • M
      [PATCH] sata_mv: three bug fixes · 63af2a5c
      由 Mark Lord 提交于 
      (1) A DMA transfer size of 0x10000 was not being written
as 0x0000 in the PRDs.  Fixed.

(1) The DEV_IRQ interrupt cause bit happens spuriously
during EDMA operation, and was not being ignored by the driver.
This led to various "drive busy" errors being reported,
with associated unpredictable behaviour.  Fixed.

(2) If a SATA or PCI interrupt was received with no outstanding
command, the interrupt handler still attempted to invoke
ata_qc_complete(), triggering assert()/BUG_ON() behaviour
elsewhere in libata.  Fixed.

The driver still has issues with confusion after error-recovery,
but should now  be reliable in the absence of drive errors.
I will be looking more into the error-handling bugs next.
Signed-Off-By: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      63af2a5c
    • A
      [PATCH] libata: ata_dev_init_params() fixes · 00b6f5e9
      由 Albert Lee 提交于 
      ata_dev_init_params() fixes:
- Get the "heads" and "sectors" parameters from caller instead of implicitly from dev->id[].
- Return AC_ERR_INVALID instead of 0 if an invalid parameter is found
Signed-off-by: NAlbert Lee <albertcc@tw.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      00b6f5e9
    • A
      [PATCH] libata: Fix interesting use of "extern" and also some bracketing · 17efc5f7
      由 Alan Cox 提交于 
      Signed-off-by: NAlan Cox <alan@redhat.com>

Last of the set, just clean up some oddments. Assuming the whole set is
now ok then the remaining differences are the setup of PIO_0 at reset
and the ->data_xfer method.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      17efc5f7
    • A
      [PATCH] libata: Simplex and other mode filtering logic · 5444a6f4
      由 Alan Cox 提交于 
      Add a field to the host_set called 'flags' (was host_set_flags changed
to suit Jeff)
Add a simplex_claimed field so we can remember who owns the DMA channel
Add a ->mode_filter() hook to allow drivers to filter modes
Add docs for mode_filter and set_mode
Filter according to simplex state
Filter cable in core

This provides the needed framework to support all the mode rules found
in the PATA world. The simplex filter deals with 'to spec' simplex DMA
systems found in older chips. The cable filter avoids duplicating the
same rules in each chip driver with PATA. Finally the mode filter is
neccessary because drive/chip combinations have errata that forbid
certain modes with some drives or types of ATA object.

Drive speed setup remains per channel for now and the filters now use
the framework Tejun put into place which cleans them up a lot from the
older libata-pata patches.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      5444a6f4
    • A
      [PATCH] libata - ATA is both ATA and CFA · 692785e7
      由 Alan Cox 提交于 
      I think this is still needed with the new probe code (which btw seems to
be missing docs in upstream ?).
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      692785e7
    • A
      [PATCH] libata: Add ->set_mode hook for odd drivers · e35a9e01
      由 Alan Cox 提交于 
      Some hardware doesn't want the usual mode setup logic running. This
allows the hardware driver to replace it for special cases in the least
invasive way possible.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      e35a9e01
    • A
      [PATCH] libata: BMDMA handling updates · 4e5ec5db
      由 Alan Cox 提交于 
      This is the minimal patch set to enable the current code to be used with
a controller following SFF (ie any PATA and early SATA controllers)
safely without crashes if there is no BMDMA area or if BMDMA is not
assigned by the BIOS for some reason.

Simplex status is recorded but not acted upon in this change, this isn't
a problem with the current drivers as none of them are for simplex
hardware. A following diff will deal with that.

The flags in the probe structure remain ->host_set_flags although Jeff
asked me to rename them, simply because the rename would break the usual
Linux rules that old code should break when there are changes. not
compile and run and then blow up/eat your computer/etc. Renaming this
later is a trivial exercise once a better name is chosen.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      4e5ec5db
    • T
      [PATCH] libata: kill trailing whitespace · 05c8e0ac
      由 Tejun Heo 提交于 
      Kill trailing whitespace.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
      05c8e0ac
  11. 29 3月, 2006 3 次提交
  13. 28 3月, 2006 1 次提交