The special cases of peek and poke on acrs[15] and the fpc register are not
handled correctly.  A poke on acrs[15] will clobber the 4 bytes after the
access registers in the thread_info structure.  That happens to be the kernel
stack pointer.  A poke on the fpc with an invalid value is not caught by the
validity check.  On the next context switch the broken fpc value will cause a
program check in the kernel.  Improving the checks in peek and poke fixes
this.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When fsync() runs wait_on_page_writeback_range() it only inspects pages which
are actually under I/O (PAGECACHE_TAG_WRITEBACK).  If a page completed I/O
prior to wait_on_page_writeback_range() looking at it, it is supposed to have
recorded its I/O error state in the address_space.

But mpage_mpage_end_io_write() forgot to set the address_space error flag in
this case.
Signed-off-by: NQu Fuping <fs@ercist.iscas.ac.cn>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

	rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

A typo in prom_find_machine_type from Ben's recent patch "ppc64: Fix
result code handling in prom_init" prevents pSeries LPAR systems from
booting.

Tested on a pSeries 570 and OpenPower 720 (both Power5 LPAR).
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Re-work the m68knommu specific idle code according to suggestions
from Nick Piggin <nickpiggin@yahoo.com.au>.

A couple of rules that we need to follow:

1. Preempt should now disabled over idle routines. Should only be enabled
to call schedule() then disabled again.

3. When cpu_idle finds (need_resched() == 'true'), it should call schedule().
It should not call schedule() otherwise.

Also fix interrupt locking around the need_resched() and cpu stop state
so that there is no race condition.
Signed-off-by: NGreg Ungerer <gerg@snapgear.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This "obvious" one-liner is needed to recognize Zaurus SL 6000;
it just checks two GUIDs not just one.

OSDL bugids #4512 and #4545 seem to be duplicates of this report.

From: Gerald Skerbitz <gsker@tcfreenet.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_DEBUG_SLAB=y I see slab corruption messages during boot on
pSeries machines with IPR adapters with any 2.6.12-rc kernel.

The change which seems to have introduced the problem is "SCSI: revamp
target scanning routines" and may be found at:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111093946426333&w=2

In order to revert that in a 2.6.12-rc1 tree, I had to revert "target
code updates to support scanned targets" first:
http://marc.theaimsgroup.com/?l=bk-commits-head&m=111094132524649&w=2

With both patches reverted, the corruption messages go away.

ipr: IBM Power RAID SCSI Device Driver version: 2.0.13 (February 21,
2005)
ipr 0001:d0:01.0: Found IOA with IRQ: 167
ipr 0001:d0:01.0: Starting IOA initialization sequence.
ipr 0001:d0:01.0: Adapter firmware version: 020A005C
ipr 0001:d0:01.0: IOA initialized.
scsi0 : IBM 570B Storage Adapter
  Vendor: IBM       Model: VSBPD4E1  U4SCSI  Rev: 4770
  Type:   Enclosure                          ANSI SCSI revision: 02
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM   H0  Model: HUS103036FL3800   Rev: RPQF
  Type:   Direct-Access                      ANSI SCSI revision: 04
  Vendor: IBM       Model: VSBPD4E1  U4SCSI  Rev: 4770
  Type:   Enclosure                          ANSI SCSI revision: 02
Slab corruption: start=c0000001e8de5268, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50)
080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a
Prev obj: start=c0000001e8de5050, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c0000001e8de5480, len=512
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228)
000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98
Slab corruption: start=c0000001e8de5268, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<c00000000029c3a0>](.scsi_target_dev_release+0x28/0x50)
080: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6a
Prev obj: start=c0000001e8de5050, len=512
Redzone: 0x5a2cf071/0x5a2cf071.
Last user: [<0000000000000000>](0x0)
000: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
010: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b
Next obj: start=c0000001e8de5480, len=512
Redzone: 0x170fc2a5/0x170fc2a5.
Last user: [<c000000000228d7c>](.as_init_queue+0x5c/0x228)
000: c0 00 00 01 e8 83 26 08 00 00 00 00 00 00 00 00
010: 00 00 00 00 00 00 00 00 c0 00 00 01 e8 de 54 98
...

I did some digging and the problem seems to be a refcounting issue in
__scsi_add_device.  The target gets freed in scsi_target_reap, and
then __scsi_add_device tries to do another device_put on it.
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Correct incorrect locking order in qla2xxx_eh_abort() handler which
would case a hang during certain code-paths.

With extra pieces to fix the irq state in the locks.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Added support to get/set flow control line levels using TIOCMGET and
TIOCMSET.
Added support for RTSCTS hardware flow control.
cp2101_get_config and cp2101_set_config modified to support long request
strings, required for configuring flow control.

Signed-off-by: Craig Shelley craig@microtron.org.uk
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On Wed, May 04, 2005 at 01:37:30PM -0700, David Brownell wrote:
> On Wednesday 04 May 2005 12:19 pm, Roman Kagan wrote:
> > struct urb {
> > 	/* private, usb core and host controller only fields in the urb */
> > 	...
> > 	struct list_head urb_list;	/* list pointer to all active urbs */
> > 	...
> > };
> >
> > Is it safe to use it for driver's purposes when the driver owns the urb,
> > that is, starting from the completion routine until the urb is submitted
> > with usb_submit_urb()?
>
> Right now, it should be.

Great!  FWIW I've briefly tested a modified version of usbatm using
the list head in struct urb instead of creating a wrapper struct, and I
haven't seen any failures yet.  So I tend to believe that your "should
be" actually means "is" :)

> > If it is, can it be guaranteed in future, e.g.
> > by moving the list head into the public section of struct urb?
>
> In fact I'm not sure why it ever got called "private" to usbcore/hcds.
> I thought the idea was that it should be like urb->status, reserved for
> whoever controls the URB.

OK then how about the following (essentially documentation) patch?
Signed-off-by: NRoman Kagan <rkagan@mail.ru>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The original entry of this patch was submitted by Filippo Bardelli
<filibard@libero.it>, with cleanups and patch-ification by me.

This corrects the subclass that the device reports.
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch makes the code to provide modalias in sysfs for usb devices
56 bytes smaller in i386, while making it clear that the first part of
the modalias string is the same no matter what the device class is.
Signed-Off-By: NPaulo Marques <pmarques@grupopie.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds a new driver for "Option" cards.  This is a GSM data card,
controlled by three "serial ports" which are connected via an OHCI adapter,
all located on an oversized PC-Card.  It's sold by several GSM service
providers.

Traditionally, this card has been accessed via the standard serial driver
and appropriate vendor= and product= options.  However, testing has
revealed several problems with this approach, including hung data transfers
and lost data blocks when receiving.

Therefore, I've written a separate driver.
Signed-off-by: NMatthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

They aren't really HID devices.

Damm microsoft HID driver, that thing has caused more companies to have
to do this kind of hack...
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds the DeLorme Earthmate lt-20 productid to the hid
blacklist table.  This patch ensures the lt-20 can be claimed by the
appropriate driver (cypress_m8).

Adds the product id 0x200, of the DeLorme Earthmate lt-20, to the hid
blacklist table.
Signed-off-by: NLonnie Mendez <lmendez19@austin.rr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- add Intuos3 and Cintiq 21UX
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes the outdated ChangeLog file for this driver.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

diff -urp -X dontdiff linux-2.6.12-rc3/drivers/block/ub.c linux-2.6.12-rc3-lem/drivers/block/ub.c

When the hardware header size is a multiple of HH_DATA_MOD, HH_DATA_OFF()
incorrectly returns HH_DATA_MOD (instead of 0). This affects ieee80211 layer
as 802.11 header is 32 bytes long.
Signed-off-by: NJiri Benc <jbenc@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

 o use a semaphore instead of an opencoded and racy lock
 o move locking out of shaper_kick and into the callers - most just
   released the lock before calling shaper_kick
 o remove in_interrupt() tests.  from ->close we can always block, from
   ->hard_start_xmit and timer context never
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

The times when tricky goto's produced better codes are long gone.

This patch should express the same in a better way.

(Also fixes the final gcc-4.0 x86 compile error)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that we have HZ=1000 there is much less of a need for decr_overclock.
Remove it.

Leave spread_lpevents but move it into iSeries_setup.c.  We should look at
making event spreading the default some day.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The iseries has a bar graph on the front panel that shows how busy it is.
The operating system sets and clears a bit in the CTRL register to control
it.

Instead of going to the complexity of using a thread info bit, just set and
clear it in the idle loop.

Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off.

Finally don't use the short form of the SPR defines.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are a bunch of irrelevant SPR definitions in asm/processer.h.  Cut
them down a bit, also add a DABR_TRANSLATION define which will be used
shortly.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a bug in list scanning that can cause us to skip the last buffer on the
checkpoint list (and hence fail to do any progress under some rather
unfavorable conditions).

The problem is we first do jh=next_jh and then test

	} while (jh!=last_jh);

Hence we skip the last buffer on the list (if it was not the only buffer on
the list).  As we already do jh=next_jh; in the beginning of the loop we
are safe to just remove the assignment in the end.  It can happen that 'jh'
will be freed at the point we test jh != last_jh but that does not matter
as we never *dereference* the pointer.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix possible false assertion failure in log_do_checkpoint().  We might fail
to detect that we actually made a progress when cleaning up the checkpoint
lists if we don't retry after writing something to disk.  The patch was
confirmed to fix observed assertion failures for several users.

When we flushed some buffers we need to retry scanning the list.
Otherwise we can fail to detect our progress.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is no usage of this EXPORT_SYMBOL in the kernel.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NHideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_vs_proto_icmp.c was never finished.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.

This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>