Pktgen can use only one IPv6 source address from output device or src6
command setting. In pressure test we need create lots of sessions more
than 65535. So add src6_min and src6_max command to set the range.
Signed-off-by: NNiu Xilei <niu_xilei@163.com>

Changes since v3:
 - function set_src_in6_addr use static instead of static inline
 - precompute min_in6_l,min_in6_h,max_in6_h,max_in6_l in setup time
Changes since v2:
 - reword subject line
Changes since v1:
 - only create IPv6 source address over least significant 64 bit range
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a conversion case for the new function, keeping the flow of the
existing code as intact as possible. We also switch over to using
skb_mark_not_on_list instead of a null write to skb->next.

Finally, this code appeared to have a memory leak in the case where
header building fails before the last gso segment. In that case, the
remaining segments are not freed. So this commit also adds the proper
kfree_skb_list call for the remainder of the skbs.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a straight-forward conversion case for the new function, keeping
the flow of the existing code as intact as possible.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a straight-forward conversion case for the new function, keeping
the flow of the existing code as intact as possible.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a straight-forward conversion case for the new function, keeping
the flow of the existing code as intact as possible.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a straight-forward conversion case for the new function, keeping
the flow of the existing code as intact as possible.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is converts xfrm segment iteration to use the new function, keeping
the flow of the existing code as intact as possible. One case is very
straight-forward, whereas the other case has some more subtle code that
likes to peak at ->next and relink skbs. By keeping the variables the
same as before, we can upgrade this code with minimal surgery required.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a straight-forward conversion case for the new function,
iterating over the return value from udp_rcv_segment, which actually is
a wrapper around skb_gso_segment.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When peernet2id() had to lock "nsid_lock" before iterating through the
nsid table, we had to disable BHs, because VXLAN can call peernet2id()
from the xmit path:
  vxlan_xmit() -> vxlan_fdb_miss() -> vxlan_fdb_notify()
    -> __vxlan_fdb_notify() -> vxlan_fdb_info() -> peernet2id().

Now that peernet2id() uses RCU protection, "nsid_lock" isn't used in BH
context anymore. Therefore, we can safely use plain
spin_lock()/spin_unlock() and let BHs run when holding "nsid_lock".
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__peernet2id() can be protected by RCU as it only calls idr_for_each(),
which is RCU-safe, and never modifies the nsid table.

rtnl_net_dumpid() can also do lockless lookups. It does two nested
idr_for_each() calls on nsid tables (one direct call and one indirect
call because of rtnl_net_dumpid_one() calling __peernet2id()). The
netnsid tables are never updated. Therefore it is safe to not take the
nsid_lock and run within an RCU-critical section instead.
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__peernet2id_alloc() was used for both plain lookups and for netns ID
allocations (depending the value of '*alloc'). Let's separate lookups
from allocations instead. That is, integrate the lookup code into
__peernet2id() and make peernet2id_alloc() responsible for allocating
new netns IDs when necessary.

This makes it clear that __peernet2id() doesn't modify the idr and
prepares the code for lockless lookups.

Also, mark the 'net' argument of __peernet2id() as 'const', since we're
modifying this line.
Signed-off-by: NGuillaume Nault <gnault@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we can allocate the extension only after the skb,
this change allows the user to do the opposite, will simplify
allocation failure handling from MPTCP.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the SACK check to work with zero option space available, a case
that's possible with MPTCP but not MD5+TS. Maintained only one
conditional branch for insufficient SACK space.

v1 -> v2:
- Moves the check inside the SACK branch by taking recent SACK fix:

    9424e2e7 (tcp: md5: fix potential overestimation of TCP option space)

  in to account, but modifies it to work in MPTCP scenarios beyond the
  MD5+TS corner case.
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MPTCP will make use of tcp_send_mss() and tcp_push() when sending
data to specific TCP subflows.

tcp_request_sock_ipvX_ops and ipvX_specific will be referenced
during TCP subflow creation.
Co-developed-by: NPeter Krystad <peter.krystad@linux.intel.com>
Signed-off-by: NPeter Krystad <peter.krystad@linux.intel.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Coalesce and collapse of packets carrying MPTCP extensions is allowed
when the newer packet has no extension or the extensions carried by both
packets are equal.

This allows merging of TSO packet trains and even cross-TSO packets, and
does not require any additional action when moving data into existing
SKBs.

v3 -> v4:
 - allow collapsing, under mptcp_skb_can_collapse() constraint

v5 -> v6:
 - clarify MPTCP skb extensions must always be cleared at allocation
   time
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add enum value for MPTCP and update config dependencies

v5 -> v6:
 - fixed '__unused' field size
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If ULP is used on a listening socket, icsk_ulp_ops and icsk_ulp_data are
copied when the listener is cloned. Sometimes the clone is immediately
deleted, which will invoke the release op on the clone and likely
corrupt the listening socket's icsk_ulp_data.

The clone operation is invoked immediately after the clone is copied and
gives the ULP type an opportunity to set up the clone socket and its
icsk_ulp_data.

The MPTCP ULP clone will silently fallback to plain TCP on allocation
failure, so 'clone()' does not need to return an error code.

v6 -> v7:
 - move and rename ulp clone helper to make it inline-friendly
v5 -> v6:
 - clarified MPTCP clone usage in commit message
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Match the 16-bit width of skbuff->protocol. Fills an 8-bit hole so
sizeof(struct sock) does not change.

Also take care of BPF field access for sk_type/sk_protocol. Both of them
are now outside the bitfield, so we can use load instructions without
further shifting/masking.

v5 -> v6:
 - update eBPF accessors, too (Intel's kbuild test robot)
v2 -> v3:
 - keep 'sk_type' 2 bytes aligned (Eric)
v1 -> v2:
 - preserve sk_pacing_shift as bit field (Eric)

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: bpf@vger.kernel.org
Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Co-developed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SK_PROTOCOL_MAX is only used in two places, for DECNet and AX.25. The
limits have more to do with the those protocol definitions than they do
with the data type of sk_protocol, so remove SK_PROTOCOL_MAX and use
U8_MAX directly.
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

using correct input parameter name to fix the below warning:

net/core/flow_dissector.c:242: warning: Function parameter or member 'thoff' not described in 'skb_flow_get_icmp_tci'
net/core/flow_dissector.c:242: warning: Excess function parameter 'toff' description in 'skb_flow_get_icmp_tci'
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Multi host Mellanox cards require MAC affinity to be set
before receiving any config commands. All config commands
should also have unicast address for source address in
command header.

Adding GMA and SMAF(Set Mac Affinity) for Mellanox card
and call these in channel probe state machine if it is
defined in device tree.
Signed-off-by: NVijay Khemka <vijaykhemka@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Smatch complains that the NULL checking isn't done consistently:

    net/ethtool/strset.c:253 strset_prepare_data()
    error: we previously assumed 'dev' could be null (see line 233)

It looks like there is a missing return on this path.

Fixes: 71921690 ("ethtool: provide string sets with STRSET_GET request")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The "ret < 0" comparison is never true because "ret" is still zero.

Fixes: 728480f1 ("ethtool: default handlers for GET requests")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If ethnl_default_parse() fails then we need to free a couple
memory allocations before returning.

Fixes: 728480f1 ("ethtool: default handlers for GET requests")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible to stack multiple DSA switches in a way that they are not
part of the tree (disjoint) but the DSA master of a switch is a DSA
slave of another. When that happens switch drivers may have to know this
is the case so as to determine whether their tagging protocol has a
remove chance of working.

This is useful for specific switch drivers such as b53 where devices
have been known to be stacked in the wild without the Broadcom tag
protocol supporting that feature. This allows b53 to continue supporting
those devices by forcing the disabling of Broadcom tags on the outermost
switches if necessary.

The get_tag_protocol() function is therefore updated to gain an
additional enum dsa_tag_protocol argument which denotes the current
tagging protocol used by the DSA master we are attached to, else
DSA_TAG_PROTO_NONE for the top of the dsa_switch_tree.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.

This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.

In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...

The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.

In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NTuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

add a devlink notification when reporter update the health
state.
Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible that a reporter recovery completion do not finish
successfully when recovery is triggered via
devlink_health_reporter_recover as recovery could be processed in
different context. In such scenario an error is returned by driver when
recover hook is invoked and successful recovery completion is
intimated later.
Expose devlink recover done API to update recovery stats.
Signed-off-by: NVikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When procfs is disabled, the fdinfo code causes a harmless
warning:

net/socket.c:1000:13: error: 'sock_show_fdinfo' defined but not used [-Werror=unused-function]
 static void sock_show_fdinfo(struct seq_file *m, struct file *f)

Move the function definition up so we can use a single #ifdef
around it.

Fixes: b4653342 ("net: Allow to show socket-specific information in /proc/[pid]/fdinfo/[fd]")
Suggested-by: NAl Viro <viro@zeniv.linux.org.uk>
Acked-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().

syzkaller managed to generate a netlink message that calls this with
LINENO attr present:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
 ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563

pass a dummy lineno storage, its easier than patching all set
implementations.

This seems to be a day-0 bug.

Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Reported-by: syzbot+34bd2369d38707f3f4a7@syzkaller.appspotmail.com
Fixes: a7b4f989 ("netfilter: ipset: IP set core support")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The timeout pointer can be NULL which means we should modify the
per-nets timeout instead.

All do this, except sctp and dccp which instead give:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477

Reported-by: syzbot+46a4ad33f345d1dd346e@syzkaller.appspotmail.com
Fixes: c779e849 ("netfilter: conntrack: remove get_timeout() indirection")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The hsr_debugfs_rename prototype got an extra 'void' that needs to
be removed again:

In file included from /git/arm-soc/net/hsr/hsr_main.c:12:
net/hsr/hsr_main.h:194:20: error: two or more data types in declaration specifiers
 static inline void void hsr_debugfs_rename(struct net_device *dev)

Fixes: 4c2d5e33 ("hsr: rename debugfs file when interface name is changed")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After receiving device mac address from device, send this as
a source address for further commands instead of broadcast
address.

This will help in multi host NIC cards.
Signed-off-by: NVijay Khemka <vijaykhemka@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.

Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As diagnosed by Florian :

If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :

if (f->credit <= 0) {
  f->credit += q->quantum;
  goto begin;
}

... because f->credit is either 0 or -2147483648.

Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.

Fixes: afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Diagnosed-by: NFlorian Westphal <fw@strlen.de>
Reported-by: syzbot+dc9071cc5a85950bdfce@syzkaller.appspotmail.com
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no module named tipc_diag.

The assignment to tipc_diag-y has no effect.
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/tipc/Makefile adds socket.o twice.

tipc-y	+= addr.o bcast.o bearer.o \
           core.o link.o discover.o msg.o  \
           name_distr.o  subscr.o monitor.o name_table.o net.o  \
           netlink.o netlink_compat.o node.o socket.o eth_media.o \
                                             ^^^^^^^^
           topsrv.o socket.o group.o trace.o
                    ^^^^^^^^
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The variable failed is being assigned a value that is never read, the
following goto statement jumps to the end of the function and variable
failed is not referenced at all.  Remove the redundant assignment.

Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both vlan_dev_change_flags() and vlan_dev_set_egress_priority()
can return an error. vlan_changelink() should not ignore them.

Fixes: 07b5b17e ("[VLAN]: Use rtnl_link API")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>