Using kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page() to
split kvm_mmu_zap_page() function, then we can:

- traverse hlist safely
- easily to gather remote tlb flush which occurs during page zapped

Those feature can be used in the later patches
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce for_each_gfn_sp() and for_each_gfn_indirect_valid_sp() to
cleanup hlist traverseing
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In kvm_mmu_unprotect_page(), the invalid sp can be skipped
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

According to SDM, we need check whether single-context INVVPID type is supported
before issuing invvpid instruction.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Reviewed-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Should use linux/uaccess.h instead of asm/uaccess.h
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The type of '*new.rmap' is not 'struct page *', fix it
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We only support 4 levels EPT pagetable now.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch adds a file that documents the usage of KVM-specific
MSRs.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Reviewed-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Instead of instantiating a whole thread_struct on the stack use only the
required parts of it.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Tested-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The vmexit handler returns KVM_EXIT_UNKNOWN since there is no handler
for vmentry failures. This intercepts vmentry failures and returns
KVM_FAIL_ENTRY to userspace instead.
Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

There's no need to calculate quadrant if tdp is enabled.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

When tdp is enabled, the guest's cr0.wp shouldn't have any effect on spte
permissions.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Memory allocation may fail. Propagate such errors.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Must set VCPU register to be the guest notion of EFER even if that
setting is not valid on hardware.  This was masked by the set in
set_efer until 7657fd5ace88e8092f5f3a84117e093d7b893f26 broke that.
Fix is simply to set the VCPU register before stripping bits.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since we have is_writable_pte(), make use of it.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In Documentation/kvm/mmu.txt:
  gfn:
    Either the guest page table containing the translations shadowed by this
    page, or the base page frame for linear translations. See role.direct.

But in function FNAME(fetch)(), sp->gfn is incorrect when one of following
situations occurred:

 1) guest is 32bit paging and the guest PDE maps a 4-MByte page
    (backed by 4k host pages), FNAME(fetch)() miss handling the quadrant.

    And if guest use pse-36, "table_gfn = gpte_to_gfn(gw->ptes[level - delta]);"
    is incorrect.

 2) guest is long mode paging and the guest PDPTE maps a 1-GByte page
    (backed by 4k or 2M host pages).

So we fix it to suit to the document and suit to the code which
requires sp->gfn correct when sp->role.direct=1.

We use the goal mapping gfn(gw->gfn) to calculate the base page frame
for linear translations, it is simple and easy to be understood.
Reported-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reported-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In Document/kvm/mmu.txt:
  gfn:
    Either the guest page table containing the translations shadowed by this
    page, or the base page frame for linear translations. See role.direct.

But in __direct_map(), the base gfn calculation is incorrect,
it does not calculate correctly when level=3 or 4.

Fix by using PT64_LVL_ADDR_MASK() which accounts for all levels correctly.
Reported-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When sp->role.direct is set, sp->gfns does not contain any essential
information, leaf sptes reachable from this sp are for a continuous
guest physical memory range (a linear range).
So sp->gfns[i] (if it was set) equals to sp->gfn + i. (PT_PAGE_TABLE_LEVEL)
Obviously, it is not essential information, we can calculate it when need.

It means we don't need sp->gfns when sp->role.direct=1,
Thus we can save one page usage for every kvm_mmu_page.

Note:
  Access to sp->gfns must be wrapped by kvm_mmu_page_get_gfn()
  or kvm_mmu_page_set_gfn().
  It is only exposed in FNAME(sync_page).
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

For the sake of completeness, this patch adds a symbolic
constant for VMX exit reason 0x21 (invalid guest state).
Signed-off-by: NMohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Allow more page become asynchronous at getting sp time, if need create new
shadow page for gfn but it not allow unsync(level > 1), we should unsync all
gfn's unsync page
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In current code, shadow page can become asynchronous only if one
shadow page for a gfn, this rule is too strict, in fact, we can
let all last mapping page(i.e, it's the pte page) become unsync,
and sync them at invlpg or flush tlb time.

This patch allow more page become asynchronous at gfn mapping time
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

On SVM interrupts are injected by svm_set_irq() not svm_inject_irq().
The later is used only to wait for irq window.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Only unsync pages need updated at invlpg time since other shadow
pages are write-protected
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Two cases maybe happen in kvm_mmu_get_page() function:

- one case is, the goal sp is already in cache, if the sp is unsync,
  we only need update it to assure this mapping is valid, but not
  mark it sync and not write-protect sp->gfn since it not broke unsync
  rule(one shadow page for a gfn)

- another case is, the goal sp not existed, we need create a new sp
  for gfn, i.e, gfn (may)has another shadow page, to keep unsync rule,
  we should sync(mark sync and write-protect) gfn's unsync shadow page.
  After enabling multiple unsync shadows, we sync those shadow pages
  only when the new sp not allow to become unsync(also for the unsyc
  rule, the new rule is: allow all pte page become unsync)
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Split kvm_sync_page() into kvm_sync_page() and kvm_sync_page_transient()
to clarify the code address Avi's suggestion

kvm_sync_page_transient() function only update shadow page but not mark
it sync and not write protect sp->gfn. it will be used by later patch
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Convert KVM to use generic FPU API.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We can avoid unnecessary fpu load when userspace process
didn't use FPU frequently.

Derived from Avi's idea.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Also add some constants.
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Now that all arch specific ioctls have centralized locking, it is easy to
move it to the central dispatcher.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

All vcpu ioctls need to be locked, so instead of locking each one specifically
we lock at the generic dispatcher.

This patch only updates generic ioctls and leaves arch specific ioctls alone.
Signed-off-by: NAvi Kivity <avi@redhat.com>

fix:
 arch/x86/kvm/x86.c: In function ‘handle_emulation_failure’:
 arch/x86/kvm/x86.c:3844: warning: unused variable ‘ctxt’
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

sp->gfns[] contain unaliased gfns, but gpte might contain pointer
to aliased region.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Remove rmap before clear spte otherwise it will trigger BUG_ON() in
some functions such as rmap_write_protect().
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use kmem_cache_free to free objects allocated by kmem_cache_alloc.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>