Currently we don't check if the new MTU is valid or not and this allows
one to configure a smaller than minimum allowed by RFCs or even bigger
than interface own MTU, which is a problem as it may lead to packet
drops.

If you have a daemon like NetworkManager running, this may be exploited
by remote attackers by forging RA packets with an invalid MTU, possibly
leading to a DoS. (NetworkManager currently only validates for values
too small, but not for too big ones.)

The fix is just to make sure the new value is valid. That is, between
IPV6_MIN_MTU and interface's MTU.

Note that similar check is already performed at
ndisc_router_discovery(), for when kernel itself parses the RA.
Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Incorrect NAPI polling caused WARNING at net/core/dev.c net_rx_action.
Some stability issues were also seen at high throughput and system
load before this patch.

This patch contains several changes in altera_tse_main.c:

- tse_rx() is fixed to not process more than `limit` frames

- tse_poll() is refactored to match NAPI logic
  - only received frames are counted for return value
  - removed bogus condition `(rxcomplete >= budget || txcomplete > 0)`
  - replace by: if (rxcomplete < budget) -> call __napi_complete and enable irq

- altera_isr()
  - replace spin_lock_irqsave() by spin_lock() - we are in isr
  - use spinlocks just over irq manipulation, not over __napi_schedule
  - reset IRQ first, then disable and schedule napi

This is a cleaned up resubmission from Vlastimil's recent submission.
Signed-off-by: NVlastimil Setka <setka@vsis.cz>
Signed-off-by: NRoman Pisl <rpisl@kky.zcu.cz>
Signed-off-by: NVince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch corrects a typo in the way tx_fifo_depth is read from the
devicetree. This patch was submitted by Vlastimil about a week ago,
and is now cleaned up and resubmitted.
Signed-off-by: NVlastimil Setka <setka@vsis.cz>
Signed-off-by: NVince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With commit a7526eb5 (net: Unbreak compat_sys_{send,recv}msg), the
MSG_CMSG_COMPAT flag is blocked at the compat syscall entry points,
changing the kernel compat behaviour from the one before the commit it
was trying to fix (1be374a0, net: Block MSG_CMSG_COMPAT in
send(m)msg and recv(m)msg).

On 32-bit kernels (!CONFIG_COMPAT), MSG_CMSG_COMPAT is 0 and the native
32-bit sys_sendmsg() allows flag 0x80000000 to be set (it is ignored by
the kernel). However, on a 64-bit kernel, the compat ABI is different
with commit a7526eb5.

This patch changes the compat_sys_{send,recv}msg behaviour to the one
prior to commit 1be374a0.

The problem was found running 32-bit LTP (sendmsg01) binary on an arm64
kernel. Arguably, LTP should not pass 0xffffffff as flags to sendmsg()
but the general rule is not to break user ABI (even when the user
behaviour is not entirely sane).

Fixes: a7526eb5 (net: Unbreak compat_sys_{send,recv}msg)
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

current->state = TASK_RUNNING can be replaced by __set_current_state()

Thanks to Peter Zijlstra for the exact definition of the problem.
Suggested-By: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently following race is possible in team:

CPU0                                        CPU1
                                            team_port_del
                                              team_upper_dev_unlink
                                                priv_flags &= ~IFF_TEAM_PORT
team_handle_frame
  team_port_get_rcu
    team_port_exists
      priv_flags & IFF_TEAM_PORT == 0
    return NULL (instead of port got
                 from rx_handler_data)
                                              netdev_rx_handler_unregister

The thing is that the flag is removed before rx_handler is unregistered.
If team_handle_frame is called in between, team_port_exists returns 0
and team_port_get_rcu will return NULL.
So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister
that team_handle_frame will always see valid rx_handler_data pointer.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Fixes: 3d249d4c ("net: introduce ethernet teaming device")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*") forgot to
initialize the members of struct rhashtable_walker after allocating it, which
caused an undefined value for 'resize' which is used later on.

Fixes: f2dba9c6 ("rhashtable: Introduce rhashtable_walk_*")
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2015-02-23

Here's one important fix for the 4.0-rc series. Refactoring of Intel
Bluetooth controller detection ended up disabling some older ones which
are based on CSR hardware. This patch re-introduces the necessary USB id
and fixes the breakage.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Older Wireless controllers from Intel used CSR chips to provide support
for Bluetooth.

The commit d0ac9eb7 (Bluetooth: btusb: Ignore unknown Intel devices
with generic descriptor) disabled these older controllers. To enable
them again, put them into the blacklist and mark them clearly as CSR
based controllers.

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=07da Rev=78.69
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
Reported-by: NKenneth R. Crudup <kenny@panix.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

tcp_should_expand_sndbuf() does not expand the send buffer if we have
filled the congestion window.

However, it should use tcp_packets_in_flight() instead of
tp->packets_out to make this check.

Testing has established that the difference matters a lot if there are
many SACKed packets, causing a needless performance shortfall.
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NNandita Dukkipati <nanditad@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trying to use burst capability (aka xmit_more) on a virtual device
like bonding is not supported.

For example, skb might be queued multiple times on a qdisc, with
various list corruptions.

Fixes: 38b2cf29 ("net: pktgen: packet bursting via skb->xmit_more")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are certain regressions which are pointing to
these two commits which we are having a hard time
resolving.  So revert them for now.

Specifically this reverts:

	commit 0bec3b70
	Author: Florian Westphal <fw@strlen.de>
	Date:   Wed Jan 7 10:49:49 2015 +0100

	    r8169: add support for xmit_more

and

	commit 1e918876
	Author: Florian Westphal <fw@strlen.de>
	Date:   Wed Oct 1 13:38:03 2014 +0200

	    r8169: add support for Byte Queue Limits

There were some attempts by Eric Dumazet to address some obvious
problems in the TX flow, to see if they would fix the problems,
but none of them seem to help for the regression reporters.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

current->state = TASK_RUNNING is replaced by __set_current_state()

Thanks to Peter Zijlstra for the exact definition of the problem.
Suggested-By: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-By: NJan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

Thanks to Peter Zijlstra for the exact definition of the problem.
Suggested-By: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use helper function to access current->state.
Direct assignments are prone to races and therefore buggy.

Thanks to Peter Zijlstra for the exact definition of the problem.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Packets defragmentation was introduced for PACKET_FANOUT_HASH only,
see 7736d33f ("packet: Add pre-defragmentation support for ipv4
fanouts")

It may be useful to have defragmentation enabled regardless of
fanout type. Without that, the AF_PACKET user may have to:
1. Collect fragments from different rings
2. Defragment by itself
Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct bucket_table contains mostly read fields :

size, locks_mask, locks.

Make sure these are not sharing a cache line with buckets[]
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

colons are used as a separator in netdev device lookup in dev_ioctl.c

Specific functions are SIOCGIFTXQLEN SIOCETHTOOL SIOCSIFNAME
Signed-off-by: NMatthew Thode <mthode@mthode.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reading 64-bits register was not working because we inverted the steps
between reading the lower 32-bits of the register and reading the upper
32-bits. Swapping these operations is how the HW guarantees that 64-bits
reads are latched correctly. We only have a handful of 64-bits registers
for now, mostly MIB counters, so the imapct is low.

Fixes: 246d7f77 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's no good reason why to disallow unloading of the rhashtable
test case module.

Commit 9d6dbe1b moved the code from a boot test into a stand-alone
module, but only converted the subsys_initcall() handler into a
module_init() function without a related exit handler, and thus
preventing the test module from unloading.

Fixes: 9d6dbe1b ("rhashtable: Make selftest modular")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When trying to allocate future tables via bucket_table_alloc(), it seems
overkill on large table shifts that we probe for kzalloc() unconditionally
first, as it's likely to fail.

Only probe with kzalloc() for more reasonable table sizes and use vzalloc()
either as a fallback on failure or directly in case of large table sizes.

Fixes: 7e1e7763 ("lib: Resizable, Scalable, Concurrent Hash Table")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Restore pre 54c5b7d3 behaviour and only probe for expansions on inserts
and shrinks on deletes. Currently, it will happen that on initial inserts
into a sparse hash table, we may i.e. shrink it first simply because it's
not fully populated yet, only to later realize that we need to grow again.

This however is counter intuitive, e.g. an initial default size of 64
elements is already small enough, and in case an elements size hint is given
to the hash table by a user, we should avoid unnecessary expansion steps,
so a shrink is clearly unintended here.

Fixes: 54c5b7d3 ("rhashtable: introduce rhashtable_wakeup_worker helper function")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Ying Xue <ying.xue@windriver.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains updates for your net tree, they are:

1) Fix removal of destination in IPVS when the new mixed family support
   is used, from Alexey Andriyanov via Simon Horman.

2) Fix module refcount undeflow in nft_compat when reusing a match /
   target.

3) Fix iptables-restore when the recent match is used with a new hitcount
   that exceeds threshold, from Florian Westphal.

4) Fix stack corruption in xt_socket due to using stack storage to save
   the inner IPv6 header, from Eric Dumazet.

I'll follow up soon with another batch with more fixes that are still
cooking.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The cfpkt_iterate() function can return -EPROTO on error, but the
function is a u16 so the negative value gets truncated to a positive
unsigned short.  This causes a static checker warning.

The only caller which might care is cffrml_receive(), when it's checking
the frame checksum.  I modified cffrml_receive() so that it never says
-EPROTO is a valid checksum.

Also this isn't ever going to be inlined so I removed the "inline".
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Issue caught by 0-day kernel test infrastructure. Code changed to use sockaddr
members so that %pISc can be used instead.

Fixes: b5a02f50 ('cxgb4 : Update ipv6 address handling api')
Signed-off-by: NAnish Bhatt <anish@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit aafb3e98 (netdev: introduce new NETIF_F_HW_SWITCH_OFFLOAD feature
flag for switch device offloads) add a new feature without adding it to
netdev_features_strings array; this patch fixes this.
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipvlan was added into 3.19 release and iproute2 added support
for the same in iproute2-3.19 package.
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With object runtime debugging enabled, the rhashtable test suite
will rightfully throw a warning "ODEBUG: object is on stack, but
not annotated" from rhashtable_init().

This is because run_work is (correctly) being initialized via
INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning,
rhashtable_init() is okay as is, we just need to move ht e.g.,
into global scope.

It never triggered anything, since test_rhashtable is rather a
controlled environment and effectively runs to completion, so
that stack memory is not vanishing underneath us, we shouldn't
confuse any testers with it though.

Fixes: 7e1e7763 ("lib: Resizable, Scalable, Concurrent Hash Table")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ltpc driver is rather outdated and does not get built on most
platforms because it requires the ISA_DMA_API symbol. However
there are some ARM platforms that have ISA_DMA_API but no virt_to_bus,
and they get this build error when enabling the ltpc driver.

drivers/net/appletalk/ltpc.c: In function 'handlefc':
drivers/net/appletalk/ltpc.c:380:2: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration]
  set_dma_addr(dma,virt_to_bus(ltdmacbuf));
  ^

This adds another dependency in Kconfig to avoid that configuration.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The smc91x driver tries to support multiple platforms at compile
time, but they are mutually exclusive at runtime, and not clearly
defined.

Trying to build for CONFIG_SA1100_ASSABET without CONFIG_ASSABET_NEPONSET
results in this link error:

drivers/built-in.o: In function `smc_drv_probe':
:(.text+0x33310c): undefined reference to `neponset_ncr_frob'

since the neponset_ncr_set function is not defined otherwise.

Similarly, building for both CONFIG_SA1100_ASSABET and CONFIG_SA1100_PLEB
results in a different build error:

smsc/smc91x.c: In function 'smc_drv_probe':
smsc/smc91x.c:2299:2: error: implicit declaration of function 'neponset_ncr_set' [-Werror=implicit-function-declaration]
  neponset_ncr_set(NCR_ENET_OSC_EN);
  ^
smsc/smc91x.c:2299:19: error: 'NCR_ENET_OSC_EN' undeclared (first use in this function)
  neponset_ncr_set(NCR_ENET_OSC_EN);
                   ^

This is an attempt to fix the call site responsible for both
errors, making sure we call the function exactly when the driver
is actually trying to run on the assabet/neponset machine. With
this patch, I no longer see randconfig build errors in this file.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Non NAPI drivers can call skb_tstamp_tx() and then sock_queue_err_skb()
from hard IRQ context.

Therefore, sock_dequeue_err_skb() needs to block hard irq or
corruptions or hangs can happen.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: 364a9e93 ("sock: deduplicate errqueue dequeue")
Fixes: cb820f8e ("net: Provide a generic socket error queue delivery method for Tx time stamps.")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_gro_remcsum_init() initializes the gro_remcsum.delta member only,
leading to compiler warnings about a possibly uninitialized
gro_remcsum.offset member:

drivers/net/vxlan.c: In function ‘vxlan_gro_receive’:
drivers/net/vxlan.c:602: warning: ‘grc.offset’ may be used uninitialized in this function
net/ipv4/fou.c: In function ‘gue_gro_receive’:
net/ipv4/fou.c:262: warning: ‘grc.offset’ may be used uninitialized in this function

While these are harmless for now:
  - skb_gro_remcsum_process() sets offset before changing delta,
  - skb_gro_remcsum_cleanup() checks if delta is non-zero before
    accessing offset,
it's safer to let the initialization function initialize all members.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If both promisc and allmulti are set, promisc should trump allmulti and
disable the MAC filter; otherwise, the interface is not really promisc.

Previously, this code checked IFF_ALLMULTI prior to and without regard for
IFF_PROMISC; if both were set, only multicast and direct unicast traffic
would make it through the filter.
Signed-off-by: NDerrick Pallas <pallas@meraki.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Open vSwitch allows moving internal vport to different namespace
while still connected to the bridge. But when namespace deleted
OVS does not detach these vports, that results in dangling
pointer to netdevice which causes kernel panic as follows.
This issue is fixed by detaching all ovs ports from the deleted
namespace at net-exit.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
IP: [<ffffffffa0aadaa5>] ovs_vport_locate+0x35/0x80 [openvswitch]
Oops: 0000 [#1] SMP
Call Trace:
 [<ffffffffa0aa6391>] lookup_vport+0x21/0xd0 [openvswitch]
 [<ffffffffa0aa65f9>] ovs_vport_cmd_get+0x59/0xf0 [openvswitch]
 [<ffffffff8167e07c>] genl_family_rcv_msg+0x1bc/0x3e0
 [<ffffffff8167e319>] genl_rcv_msg+0x79/0xc0
 [<ffffffff8167d919>] netlink_rcv_skb+0xb9/0xe0
 [<ffffffff8167deac>] genl_rcv+0x2c/0x40
 [<ffffffff8167cffd>] netlink_unicast+0x12d/0x1c0
 [<ffffffff8167d3da>] netlink_sendmsg+0x34a/0x6b0
 [<ffffffff8162e140>] sock_sendmsg+0xa0/0xe0
 [<ffffffff8162e5e8>] ___sys_sendmsg+0x408/0x420
 [<ffffffff8162f541>] __sys_sendmsg+0x51/0x90
 [<ffffffff8162f592>] SyS_sendmsg+0x12/0x20
 [<ffffffff81764ee9>] system_call_fastpath+0x12/0x17
Reported-by: NAssaf Muller <amuller@redhat.com>
Fixes: 46df7b81("openvswitch: Add support for network namespaces.")
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Reviewed-by: NThomas Graf <tgraf@noironetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In tcf_em_validate(), after calling request_module() to load the
kind-specific module, set em->ops to NULL before returning -EAGAIN, so
that module_put() is not called again by tcf_em_tree_destroy().
Signed-off-by: NIgnacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: NCong Wang <cwang@twopensource.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e707706 ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_copy_bits() returns zero on success and negative value on error,
so it is needed to invert the condition in ip_check_defrag().

Fixes: 1bf3751e ("ipv4: ip_check_defrag must not modify skb before unsharing")
Signed-off-by: NAlexander Drozdov <al.drozdov@gmail.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.
Signed-off-by: NBen Shelton <ben.shelton@ni.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>