This patch prevents the changed CPU state to be written back
when the emulator detected that the instruction was
intercepted by the guest.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add intercept codes for instructions defined by SVM as
interceptable.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When running in guest mode, certain instructions can be intercepted by
hardware.  This also holds for nested guests running on emulated
virtualization hardware, in particular instructions emulated by kvm
itself.

This patch adds a framework for intercepting instructions.  If an
instruction is marked for interception, and if we're running in guest
mode, a callback is called to check whether an intercept is needed or
not.  The callback is called at three points in time: immediately after
beginning execution, after checking privilge exceptions, and after
checking memory exception.  This suits the different interception points
defined for different instructions and for the various virtualization
instruction sets.

In addition, a new X86EMUL_INTERCEPT is defined, which any callback or
memory access may define, allowing the more complicated intercepts to be
implemented in existing callbacks.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add support for marking an instruction as SSE, switching registers used
to the SSE register file.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Needed for emulating fpu instructions.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently we store a rep prefix as 1 or 2 depending on whether it is a REPE or
REPNE.  Since sse instructions depend on the prefix value, store it as the
original opcode to simplify things further on.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since sse instructions can issue 16-byte mmios, we need to support them.  We
can't increase the kvm_run mmio buffer size to 16 bytes without breaking
compatibility, so instead we break the large mmios into two smaller 8-byte
ones.  Since the bus is 64-bit we aren't breaking any atomicity guarantees.
Signed-off-by: NAvi Kivity <avi@redhat.com>

We may read the cpl quite often in the same vmexit (instruction privilege
check, memory access checks for instruction and operands), so we gain
a bit if we cache the value.
Signed-off-by: NAvi Kivity <avi@redhat.com>

If called several times within the same exit, return cached results.
Signed-off-by: NAvi Kivity <avi@redhat.com>

We use io_apic_setup_irq_pin() in order to configure pin's interrupt
number polarity and type. This is done on every irq_create_of_mapping()
which happens for instance during pci enable calls. Level typed
interrupts are masked by default, edge are unmasked.

On the first ->xlate() call the level interrupt is configured and
masked. The driver calls request_irq() and the line is unmasked. Lets
assume the interrupt line is shared with another device and we call
pci_enable_device() for this device. The ->xlate() configures the pin
again and it is masked. request_irq() does not unmask the line because
it _is_ already unmasked according to its internal state. So the
interrupt will never be unmasked again.

This patch is based on an earlier work by Torben Hohn and solves the
problem by configuring the pin only once. Since all devices must agree
on the same type and polarity there is no point in configuring the pin
more than once.

[ tglx: Split out the ce4100 part into a separate patch ]

Cc: Torben Hohn <torbenh@linutronix.de>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/%3C20110427143052.GA15211%40linutronix.de%3ESigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The cpu<->node mappings under CONFIG_DEBUG_PER_CPU_MAPS=y
when NUMA emulation is enabled is currently broken because it does
not iterate through every emulated node and bind cpus that have
affinity to it.

NUMA emulation should bind each cpu to every local node to
accurately represent the true NUMA topology of the underlying
machine.

debug_cpumask_set_cpu() needs to be fixed at the same time so
that the debugging information that it emits shows the new
cpumask of the node being assigned when the cpu is being added
or removed.

It can now take responsibility of setting or clearing the cpu
itself to remove the need for duplicate code.

Also change its last parameter, "enable", to have the correct bool
type since it can only be true or false.

 -v2: Fix the return statements, by Kosaki Motohiro
Acked-and-Tested-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1104201918470.12634@chino.kir.corp.google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The DISTLBWALKPRB bit must be set for the GART because the
gatt table is mapped UC. But the current code does not set
the bit at boot when the BIOS setup the aperture correctly.
Fix that by setting this bit when enabling the GART instead
of the other places.

Cc: <stable@kernel.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1303134346-5805-4-git-send-email-joerg.roedel@amd.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Probably by copy&paste this function was indented by spaces.
Convert this to tabs.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/1303134346-5805-3-git-send-email-joerg.roedel@amd.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch disables GartTlbWlk errors on AMD Fam10h CPUs if
the BIOS forgets to do is (or is just too old). Letting
these errors enabled can cause a sync-flood on the CPU
causing a reboot.

The AMD BKDG recommends disabling GART TLB Wlk Error completely.

This patch is the fix for

	https://bugzilla.kernel.org/show_bug.cgi?id=33012

on my machine.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Link: http://lkml.kernel.org/r/20110415131152.GJ18463@8bytes.orgTested-by: NAlexandre Demers <alexandre.f.demers@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

On 32bit systems without SSE (that is, they use FSAVE/FRSTOR for FPU
context switches), FPU exceptions in user mode cause Oopses, BUGs,
recursive faults and other nasty things:

fpu exception: 0000 [#1]
last sysfs file: /sys/power/state
Modules linked in: psmouse evdev pcspkr serio_raw [last unloaded: scsi_wait_scan]

Pid: 1638, comm: fxsave-32-excep Not tainted 2.6.35-07798-g58a992b9-dirty #633 VP3-596B-DD/VT82C597
EIP: 0060:[<c1003527>] EFLAGS: 00010202 CPU: 0
EIP is at math_error+0x1b4/0x1c8
EAX: 00000003 EBX: cf9be7e0 ECX: 00000000 EDX: cf9c5c00
ESI: cf9d9fb4 EDI: c1372db3 EBP: 00000010 ESP: cf9d9f1c
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process fxsave-32-excep (pid: 1638, ti=cf9d8000 task=cf9be7e0 task.ti=cf9d8000)
Stack:
00000000 00000301 00000004 00000000 00000000 cf9d3000 cf9da8f0 00000001
<0> 00000004 cf9b6b60 c1019a6b c1019a79 00000020 00000242 000001b6 cf9c5380
<0> cf806b40 cf791880 00000000 00000282 00000282 c108a213 00000020 cf9c5380
Call Trace:
[<c1019a6b>] ? need_resched+0x11/0x1a
[<c1019a79>] ? should_resched+0x5/0x1f
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c108a213>] ? do_sys_open+0xbd/0xc7
[<c100353b>] ? do_coprocessor_error+0x0/0x11
[<c12d5965>] ? error_code+0x65/0x70
Code: a8 20 74 30 c7 44 24 0c 06 00 03 00 8d 54 24 04 89 d9 b8 08 00 00 00 e8 9b 6d 02 00 eb 16 8b 93 5c 02 00 00 eb 05 e9 04 ff ff ff <9b> dd 32 9b e9 16 ff ff ff 81 c4 84 00 00 00 5b 5e 5f 5d c3 c6
EIP: [<c1003527>] math_error+0x1b4/0x1c8 SS:ESP 0068:cf9d9f1c

This usually continues in slight variations until the system is reset.

This bug was introduced by commit 58a992b9:
	x86-32, fpu: Rewrite fpu_save_init()
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Link: http://lkml.kernel.org/r/1302106003-366952-1-git-send-email-hans.rosenfeld@amd.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

Stop including <linux/delay.h> in x86 header files which don't
need it. This will let the compiler complain when this header is
not included by source files when it should, so that
contributors can fix the problem before building on other
architectures starts to fail.

Credits go to Geert for the idea.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: James E.J. Bottomley <James.Bottomley@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
LKML-Reference: <20110325152014.297890ec@endymion.delvare>
[ this also fixes an upstream build bug in drivers/media/rc/ite-cir.c ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Omit the segment prefix in the UP case. GS is not used then
and we will generate segfaults if cmpxchg16b is used otherwise.
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no user now.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This tag is intended to mirror the thread info TIF_IA32 flag.  Will be used to
identify mm's which support 32 bit tasks running in compatibility mode without
requiring a reference to the task itself.
Signed-off-by: NStephen Wilson <wilsons@start.ca>
Reviewed-by: NMichel Lespinasse <walken@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Not all 64-bit systems require ISA-style DMA, so allow it to be
configurable.  x86 utilizes the generic ISA DMA allocator from
kernel/dma.c, so require it only when CONFIG_ISA_DMA_API is enabled.

Disabling CONFIG_ISA_DMA_API is dependent on x86_64 since those machines
do not have ISA slots and benefit the most from disabling the option (and
on CONFIG_EXPERT as required by H.  Peter Anvin).

When disabled, this also avoids declaring claim_dma_lock(),
release_dma_lock(), request_dma(), and free_dma() since those interfaces
will no longer be provided.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All architectures can use the common dma_addr_t typedef now. We can
remove the arch specific dma_addr_t.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a node parameter to alloc_thread_info(), and change its name to
alloc_thread_info_node()

This change is needed to allow NUMA aware kthread_create_on_cpu()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is frequently useful to sync a single file system, instead of all
mounted file systems via sync(2):

 - On machines with many mounts, it is not at all uncommon for some of
   them to hang (e.g. unresponsive NFS server).  sync(2) will get stuck on
   those and may never get to the one you do care about (e.g., /).
 - Some applications write lots of data to the file system and then
   want to make sure it is flushed to disk.  Calling fsync(2) on each
   file introduces unnecessary ordering constraints that result in a large
   amount of sub-optimal writeback/flush/commit behavior by the file
   system.

There are currently two ways (that I know of) to sync a single super_block:

 - BLKFLSBUF ioctl on the block device: That also invalidates the bdev
   mapping, which isn't usually desirable, and doesn't work for non-block
   file systems.
 - 'mount -o remount,rw' will call sync_filesystem as an artifact of the
   current implemention.  Relying on this little-known side effect for
   something like data safety sounds foolish.

Both of these approaches require root privileges, which some applications
do not have (nor should they need?) given that sync(2) is an unprivileged
operation.

This patch introduces a new system call syncfs(2) that takes an fd and
syncs only the file system it references.  Maybe someday we can

 $ sync /some/path

and not get

 sync: ignoring all arguments

The syscall is motivated by comments by Al and Christoph at the last LSF.
syncfs(2) seems like an appropriate name given statfs(2).

A similar ioctl was also proposed a while back, see
	http://marc.info/?l=linux-fsdevel&m=127970513829285&w=2Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

According to intel CPU manual, every time PGD entry is changed in i386 PAE
mode, we need do a full TLB flush. Current code follows this and there is
comment for this too in the code.

But current code misses the multi-threaded case. A changed page table
might be used by several CPUs, every such CPU should flush TLB. Usually
this isn't a problem, because we prepopulate all PGD entries at process
fork. But when the process does munmap and follows new mmap, this issue
will be triggered.

When it happens, some CPUs keep doing page faults:

  http://marc.info/?l=linux-kernel&m=129915020508238&w=2

Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Cc: Mallick Asit K <asit.k.mallick@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm <linux-mm@kvack.org>
Cc: stable <stable@kernel.org>
LKML-Reference: <1300246649.2337.95.camel@sli10-conroe>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Current stack dump code scans entire stack and check each entry
contains a pointer to kernel code. If CONFIG_FRAME_POINTER=y it
could mark whether the pointer is valid or not based on value of
the frame pointer. Invalid entries could be preceded by '?' sign.

However this was not going to happen because scan start point
was always higher than the frame pointer so that they could not
meet.

Commit 9c0729dc ("x86: Eliminate bp argument from the stack
tracing routines") delayed bp acquisition point, so the bp was
read in lower frame, thus all of the entries were marked
invalid.

This patch fixes this by reverting above commit while retaining
stack_frame() helper as suggested by Frederic Weisbecker.

End result looks like below:

before:

 [    3.508329] Call Trace:
 [    3.508551]  [<ffffffff814f35c9>] ? panic+0x91/0x199
 [    3.508662]  [<ffffffff814f3739>] ? printk+0x68/0x6a
 [    3.508770]  [<ffffffff81a981b2>] ? mount_block_root+0x257/0x26e
 [    3.508876]  [<ffffffff81a9821f>] ? mount_root+0x56/0x5a
 [    3.508975]  [<ffffffff81a98393>] ? prepare_namespace+0x170/0x1a9
 [    3.509216]  [<ffffffff81a9772b>] ? kernel_init+0x1d2/0x1e2
 [    3.509335]  [<ffffffff81003894>] ? kernel_thread_helper+0x4/0x10
 [    3.509442]  [<ffffffff814f6880>] ? restore_args+0x0/0x30
 [    3.509542]  [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2
 [    3.509641]  [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10

after:

 [    3.522991] Call Trace:
 [    3.523351]  [<ffffffff814f35b9>] panic+0x91/0x199
 [    3.523468]  [<ffffffff814f3729>] ? printk+0x68/0x6a
 [    3.523576]  [<ffffffff81a981b2>] mount_block_root+0x257/0x26e
 [    3.523681]  [<ffffffff81a9821f>] mount_root+0x56/0x5a
 [    3.523780]  [<ffffffff81a98393>] prepare_namespace+0x170/0x1a9
 [    3.523885]  [<ffffffff81a9772b>] kernel_init+0x1d2/0x1e2
 [    3.523987]  [<ffffffff81003894>] kernel_thread_helper+0x4/0x10
 [    3.524228]  [<ffffffff814f6880>] ? restore_args+0x0/0x30
 [    3.524345]  [<ffffffff81a97559>] ? kernel_init+0x0/0x1e2
 [    3.524445]  [<ffffffff81003890>] ? kernel_thread_helper+0x0/0x10

 -v5:
   * fix build breakage with oprofile

 -v4:
   * use 0 instead of regs->bp
   * separate out printk changes

 -v3:
   * apply comment from Frederic
   * add a couple of printk fixes
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Soren Sandmann <ssp@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <1300416006-3163-1-git-send-email-namhyung@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

They were generated by 'codespell' and then manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: trivial@kernel.org
LKML-Reference: <1300389856-1099-3-git-send-email-lucas.demarchi@profusion.mobi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch does:
- call vcpu->arch.mmu.update_pte directly
- use gfn_to_pfn_atomic in update_pte path

The suggestion is from Avi.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Current implementation truncates upper 32bit of TR base address during IO
permission bitmap check. The patch fixes this.
Reported-and-tested-by: NFrancis Moreau <francis.moro@gmail.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

No need to record the gfn to verifier the pte has the same mode as
current vcpu, it's because we only speculatively update the pte only
if the pte and vcpu have the same mode
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Code under this lock requires non-preemptibility. Ensure this also over
-rt by converting it to raw spinlock.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Code under this lock requires non-preemptibility. Ensure this also over
-rt by converting it to raw spinlock.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Mark some instructions as vendor specific, and allow the caller to request
emulation only of vendor specific instructions.  This is useful in some
circumstances (responding to a #UD fault).
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

A correction to Intel cpu model CPUID data (patch queued)
caused winxp to BSOD when booted with a Penryn model.
This was traced to the CPUID "model" field correction from
6 -> 23 (as is proper for a Penryn class of cpu).  Only in
this case does the problem surface.

The cause for this failure is winxp accessing the BBL_CR_CTL3
MSR which is unsupported by current kvm, appears to be a
legacy MSR not fully characterized yet existing in current
silicon, and is apparently carried forward in MSR space to
accommodate vintage code as here.  It is not yet conclusive
whether this MSR implements any of its legacy functionality
or is just an ornamental dud for compatibility.  While I
found no silicon version specific documentation link to
this MSR, a general description exists in Intel's developer's
reference which agrees with the functional behavior of
other bootloader/kernel code I've examined accessing
BBL_CR_CTL3.  Regrettably winxp appears to be setting bit #19
called out as "reserved" in the above document.

So to minimally accommodate this MSR, kvm msr get will provide
the equivalent mock data and kvm msr write will simply toss the
guest passed data without interpretation.  While this treatment
of BBL_CR_CTL3 addresses the immediate problem, the approach may
be modified pending clarification from Intel.
Signed-off-by: Njohn cooper <john.cooper@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch add new syscalls to x86_64
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch adds new syscalls to x86_32
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If there is no proper PFN value in the M2P for the MFN
(so we get 0xFFFFF.. or 0x55555, or 0x0), we should
consult the M2P override to see if there is an entry for this.
[Note: we also consult the M2P override if the MFN
is past our machine_to_phys size].

We consult the P2M with the PFN. In case the returned
MFN is one of the special values: 0xFFF.., 0x5555
(which signify that the MFN can be either "missing" or it
belongs to DOMID_IO) or the p2m(m2p(mfn)) != mfn, we check
the M2P override. If we fail the M2P override check, we reset
the PFN value to INVALID_P2M_ENTRY.

Next we try to find the MFN in the P2M using the MFN
value (not the PFN value) and if found, we know
that this MFN is an identity value and return it as so.

Otherwise we have exhausted all the posibilities and we
return the PFN, which at this stage can either be a real
PFN value found in the machine_to_phys.. array, or
INVALID_P2M_ENTRY value.

[v1: Added Review-by tag]
Reviewed-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

.. beyound what we think is the end of memory. However there might
be more System RAM - but assigned to a guest. Hence jump to the
M2P override check and consult.

[v1: Added Review-by tag]
Reviewed-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>