- 10 2月, 2006 6 次提交
-
-
由 Jon Mason 提交于
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Currently we have some stuff in firmware.h and kernel/firmware.c that is #ifdef CONFIG_PPC_PSERIES. Move it all into platforms/pseries. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Clean up fw_feature_init in platforms/pseries/setup.c. Clean up white space and replace the while loop with a for loop - which seems clearer to me. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Ran arch/powerpc/platforms/85xx through Lindent Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Rename mpc85xx.c to misc.c to match the pattern established by the 8349 port - consistency is a good thing. Also run Lindent on the file to clean it up. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Cut-and-paste from the old platform code in arch/ppc resulted in arch/powerpc/platforms/85xx/mpc85xx_ads.c having way too many header files included. Clean this up. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 2月, 2006 4 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
extern in function definition is an odd thing.. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
drive_info is used only by hd.c and that happens under #ifdef __i386__. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 2月, 2006 7 次提交
-
-
由 Kumar Gala 提交于
Ran arch/powerpc/platforms/83xx through Lindent Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
Moved some code around so its usable by more systems than just the MPC834x SYS. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
remove extern declarations of pmac_newworld move pmac_newworld to bss if there is any "interrupt-controller" device, then it is newworld. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
We call unregister_vpa but we don't check to see if the hypervisor supports this. Signed-off-by: NMichael Neuling <mikey@neuling.org> Acked-by: NAnton Blanchard <anton@samba.org> -- arch/powerpc/platforms/pseries/setup.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
setup_peg2 must do some refcounting. of_get_pci_address may need to drop the node Pegasos l2cr : L2 cache was not active, activating PCI bus 0 controlled by pci at 80000000 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BD00] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BD30] [C000E068] program_check_exception+0x184/0x584 [C037BD90] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BE50] [C004FD94] __pte_alloc_kernel+0x64/0x80 (unreliable) [C037BE70] [C000CA18] of_get_parent+0x34/0x58 [C037BE90] [C0009B18] of_get_address+0x24/0x174 [C037BED0] [C000A108] of_address_to_resource+0x24/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BC90] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BCC0] [C000E068] program_check_exception+0x184/0x584 [C037BD20] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BDE0] [00000000] 0x0 (unreliable) [C037BE00] [C000CA18] of_get_parent+0x34/0x58 [C037BE20] [C0009CE8] of_translate_address+0x2c/0x2fc [C037BEA0] [C0009FE8] __of_address_to_resource+0x30/0xc4 [C037BED0] [C000A130] of_address_to_resource+0x4c/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 PCI bus 0 controlled by pci at c0000000 Top of RAM: 0x10000000, Total RAM: 0x10000000 Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Use generic_calibrate_decr to restore missing clock: speed in /proc/cpuinfo Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
This is a small fix to get the spufs init sequence right. init_spu_base() in spu_base.c should be called (via module_init(init_spu_base)) before spufs_init() (via module_init(spufs_init)) in spufs/inode.c gets called. Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 02 2月, 2006 2 次提交
-
-
由 Linas Vepstas 提交于
Build break: Building PCI hotplug on PowerPC results in a build break, due to failure to export symbols. Reported today by Dave Jones <davej@redhat.com>: drivers/pci/hotplug/rpaphp.ko needs unknown symbol pcibios_add_pci_devices This patch fixes the break in the arch/powerpc tree. Next patch fixes same problem in drivers/pci tree Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Collins 提交于
Make the platform function interrupt functions actually work. Calls irq_enable() for the first in the list, and irq_disable() for the last. Added *func to struct irq_client so the the user can pass just that to pmf_unregister_irq_client(). Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 2月, 2006 1 次提交
-
-
由 David S. Miller 提交于
Revert: 40727198 These PHY changes hang the sungem driver on startup with Sun chips on sparc64. Hopefully we can redo these changes in a way that doesn't break non-Apple systems. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2006 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
On my latest laptop, I've had occasional PHY dead on wakeup from sleep... the PHY would be totally unresponsive even to toggling the hard reset line until the machine is powered down... Looking closely at the code, I found some possible issues in the way we setup the MDIO lines during suspend along with slight divergences from what Darwin does when resetting it that may explain the problem. That patch change these and the problem appear to be gone for me at least... I also fixed an mdelay -> msleep while I was at it to the pmac feature code that is called when toggling the PHY reset line since sungem doesn't call it in an atomic context anymore. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>b Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2006 1 次提交
-
-
由 Becky Bruce 提交于
Updated patch for support for mpc8540_ads in arch/powerpc with a flat OF device tree. This patch does not yet support PCI or I2C. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 15 1月, 2006 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The changes to the device node structure broke Maple build. This fixes it. Unfortunately I coudn't test as my Maple board appears to be dead. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 1月, 2006 2 次提交
-
-
由 David Woodhouse 提交于
This makes CHRP build again, although it's untested because my Pegasos is currently in pieces. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
Add the first MPC83xx board that uses a flat device tree to arch/powerpc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 1月, 2006 3 次提交
-
-
由 David Gibson 提交于
At present the lppaca - the structure shared with the iSeries hypervisor and phyp - is contained within the PACA, our own low-level per-cpu structure. This doesn't have to be so, the patch below removes it, making a separate array of lppaca structures. This saves approximately 500*NR_CPUS bytes of image size and kernel memory, because we don't need aligning gap between the Linux and hypervisor portions of every PACA. On the other hand it means an extra level of dereference in many accesses to the lppaca. The patch also gets rid of several places where we assign the paca address to a local variable for no particular reason. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Dave C Boutcher 提交于
Add support to reconfigure the device tree through the existing proc filesystem interface. Add "add_property", "remove_property", and "update_property" commands to the existing interface. Signed-off-by: NDave Boutcher <sleddog@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 8 次提交
-
-
由 Arnd Bergmann 提交于
These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
pmac_setup_arch is only used in the file that it is defined in, so it should not be in the global namespace. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Arnd Bergmann 提交于
These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
There was a function declared for CONFIG_PSERIES which no longer exists and the two function declarations for CONFIG_ISERIES have been moved into an include file in platforms/iseries since they are defined and used only there. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
This reverts part of "ppc64 iSeries: allow build with no PCI" (145d01e4) which affected generic code and applies a fix in the arch specific code. Commit "partly merge iseries do_IRQ" (5fee9b3b39eb55c7e3619a3b36ceeabffeb8f144) introduced iSeries_get_irq which was only available if CONFIG_PCI is set. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Remove warning in eeh code about mixed variables and code. Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 11 1月, 2006 4 次提交
-
-
由 Michael Ellerman 提交于
iSeries doesn't need to set the htab_address explicitly, htab_initialize() will do it for us later. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
To make iSeries just a teensy bit less special, create ibm,pft-size properties in the iSeries device tree. We can then rely on htab_dt_scan_pftsize() to set ppc64_pft_size for us. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
Updated Kconfig & Makefiles in prep for adding support for the Freescale MPC83xx family of processors to arch/powerpc. Moved around some config options that are more globally applicable to other PowerPC processors. Added a temporary config option (83xx) to match existing arch/ppc support for the MPC83xx line. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
The SPE Book IV indicates that MFC DMA operations must be suspended and restored on SPU context switch (in Step 8). This patch adds that operation, which is missing from the current spufs implementation. Signed-off-by: NMasato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-