Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 16 7月, 2014 10 次提交
    • H
      cxgb4/iw_cxgb4: work request logging feature · 7730b4c7
      由 Hariprasad Shenai 提交于 
      This commit enhances the iwarp driver to optionally keep a log of rdma
work request timining data for kernel mode QPs.  If iw_cxgb4 module option
c4iw_wr_log is set to non-zero, each work request is tracked and timing
data maintained in a rolling log that is 4096 entries deep by default.
Module option c4iw_wr_log_size_order allows specifing a log2 size to use
instead of the default order of 12 (4096 entries). Both module options
are read-only and must be passed in at module load time to set them. IE:

modprobe iw_cxgb4 c4iw_wr_log=1 c4iw_wr_log_size_order=10

The timing data is viewable via the iw_cxgb4 debugfs file "wr_log".
Writing anything to this file will clear all the timing data.
Data tracked includes:

- The host time when the work request was posted, just before ringing
the doorbell.  The host time when the completion was polled by the
application.  This is also the time the log entry is created.  The delta
of these two times is the amount of time took processing the work request.

- The qid of the EQ used to post the work request.

- The work request opcode.

- The cqe wr_id field.  For sq completions requests this is the swsqe
index.  For recv completions this is the MSN of the ingress SEND.
This value can be used to match log entries from this log with firmware
flowc event entries.

- The sge timestamp value just before ringing the doorbell when
posting,  the sge timestamp value just after polling the completion,
and CQE.timestamp field from the completion itself.  With these three
timestamps we can track the latency from post to poll, and the amount
of time the completion resided in the CQ before being reaped by the
application.  With debug firmware, the sge timestamp is also logged by
firmware in its flowc history so that we can compute the latency from
posting the work request until the firmware sees it.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7730b4c7
    • H
      cxgb4/iw_cxgb4: display TPTE on errors · 031cf476
      由 Hariprasad Shenai 提交于 
      With ingress WRITE or READ RESPONSE errors, HW provides the offending
stag from the packet.  This patch adds logic to log the parsed TPTE
in this case. cxgb4 now exports a function to read a TPTE entry
from adapter memory.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      031cf476
    • H
      cxgb4/iw_cxgb4: use firmware ord/ird resource limits · 4c2c5763
      由 Hariprasad Shenai 提交于 
      Advertise a larger max read queue depth for qps, and gather the resource limits
from fw and use them to avoid exhaustinq all the resources.

Design:

cxgb4:

Obtain the max_ordird_qp and max_ird_adapter device params from FW
at init time and pass them up to the ULDs when they attach.  If these
parameters are not available, due to older firmware, then hard-code
the values based on the known values for older firmware.
iw_cxgb4:

Fix the c4iw_query_device() to report these correct values based on
adapter parameters.  ibv_query_device() will always return:

max_qp_rd_atom = max_qp_init_rd_atom = min(module_max, max_ordird_qp)
max_res_rd_atom = max_ird_adapter

Bump up the per qp max module option to 32, allowing it to be increased
by the user up to the device max of max_ordird_qp.  32 seems to be
sufficient to maximize throughput for streaming read benchmarks.

Fail connection setup if the negotiated IRD exhausts the available
adapter ird resources.  So the driver will track the amount of ird
resource in use and not send an RI_WR/INIT to FW that would reduce the
available ird resources below zero.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4c2c5763
    • H
      iw_cxgb4: Detect Ing. Padding Boundary at run-time · 04e10e21
      由 Hariprasad Shenai 提交于 
      Updates iw_cxgb4 to determine the Ingress Padding Boundary from
cxgb4_lld_info, and take subsequent actions.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      04e10e21
    • C
      tcp: Remove unnecessary arg from tcp_enter_cwr and tcp_init_cwnd_reduction · 5ee2c941
      由 Christoph Paasch 提交于 
      Since Yuchung's 9b44190d (tcp: refactor F-RTO), tcp_enter_cwr is always
called with set_ssthresh = 1. Thus, we can remove this argument from
tcp_enter_cwr. Further, as we remove this one, tcp_init_cwnd_reduction
is then always called with set_ssthresh = true, and so we can get rid of
this argument as well.

Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Acked-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5ee2c941
    • T
      net: rtnetlink - make create_link take name_assign_type · 5517750f
      由 Tom Gundersen 提交于 
      This passes down NET_NAME_USER (or NET_NAME_ENUM) to alloc_netdev(),
for any device created over rtnetlink.

v9: restore reverse-christmas-tree order of local variables
Signed-off-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5517750f
    • T
      net: set name_assign_type in alloc_netdev() · c835a677
      由 Tom Gundersen 提交于 
      Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit
Signed-off-by: NTom Gundersen <teg@jklm.no>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c835a677
    • T
      net: set name assign type for renamed devices · 238fa362
      由 Tom Gundersen 提交于 
      Based on a patch from David Herrmann.

This is the only place devices can be renamed.

v9: restore revers-christmas-tree order of local variables
Signed-off-by: NTom Gundersen <teg@jklm.no>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      238fa362
    • T
      net: add name_assign_type netdev attribute · 685343fc
      由 Tom Gundersen 提交于 
      Based on a patch by David Herrmann.

The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
  NET_NAME_ENUM:
    The ifname is provided by the kernel with an enumerated
    suffix, typically based on order of discovery. Names may
    be reused and unpredictable.
  NET_NAME_PREDICTABLE:
    The ifname has been assigned by the kernel in a predictable way
    that is guaranteed to avoid reuse and always be the same for a
    given device. Examples include statically created devices like
    the loopback device and names deduced from hardware properties
    (including being given explicitly by the firmware). Names
    depending on the order of discovery, or in any other way on the
    existence of other devices, must not be marked as PREDICTABLE.
  NET_NAME_USER:
    The ifname was provided by user-space during net-device setup.
  NET_NAME_RENAMED:
    The net-device has been renamed from userspace. Once this type is set,
    it cannot change again.
  NET_NAME_UNKNOWN:
    This is an internal placeholder to indicate that we yet haven't yet
    categorized the name. It will not be exposed to userspace, rather
    -EINVAL is returned.

The aim of these patches is to improve user-space renaming of interfaces. As
a general rule, userspace must rename interfaces to guarantee that names stay
the same every time a given piece of hardware appears (at boot, or when
attaching it). However, there are several situations where userspace should
not perform the renaming, and that depends on both the policy of the local
admin, but crucially also on the nature of the current interface name.

If an interface was created in repsonse to a userspace request, and userspace
already provided a name, we most probably want to leave that name alone. The
main instance of this is wifi-P2P devices created over nl80211, which currently
have a long-standing bug where they are getting renamed by udev. We label such
names NET_NAME_USER.

If an interface, unbeknown to us, has already been renamed from userspace, we
most probably want to leave also that alone. This will typically happen when
third-party plugins (for instance to udev, but the interface is generic so could
be from anywhere) renames the interface without informing udev about it. A
typical situation is when you switch root from an installer or an initrd to the
real system and the new instance of udev does not know what happened before
the switch. These types of problems have caused repeated issues in the past. To
solve this, once an interface has been renamed, its name is labelled
NET_NAME_RENAMED.

In many cases, the kernel is actually able to name interfaces in such a
way that there is no need for userspace to rename them. This is the case when
the enumeration order of devices, or in fact any other (non-parent) device on
the system, can not influence the name of the interface. Examples include
statically created devices, or any naming schemes based on hardware properties
of the interface. In this case the admin may prefer to use the kernel-provided
names, and to make that possible we label such names NET_NAME_PREDICTABLE.
We want the kernel to have tho possibilty of performing predictable interface
naming itself (and exposing to userspace that it has), as the information
necessary for a proper naming scheme for a certain class of devices may not
be exposed to userspace.

The case where renaming is almost certainly desired, is when the kernel has
given the interface a name using global device enumeration based on order of
discovery (ethX, wlanY, etc). These naming schemes are labelled NET_NAME_ENUM.

Lastly, a fallback is left as NET_NAME_UNKNOWN, to indicate that a driver has
not yet been ported. This is mostly useful as a transitionary measure, allowing
us to label the various naming schemes bit by bit.

v8: minor documentation fixes
v9: move comment to the right commit
Signed-off-by: NTom Gundersen <teg@jklm.no>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      685343fc
    • E
      net: mvpp2: Fix a typo in the license · c634099d
      由 Ezequiel Garcia 提交于 
      The proper string for this license is "GPL v2", instead of "GPLv2".
This commit fixes that.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c634099d
  3. 15 7月, 2014 15 次提交
  5. 14 7月, 2014 12 次提交
  7. 12 7月, 2014 3 次提交
    • H
      ipv6: Use BUG_ON · e3f0b86b
      由 Himangi Saraogi 提交于 
      The semantic patch that makes this transformation is as follows:

// <smpl>
@@ expression e; @@
-if (e) BUG();
+BUG_ON(e);
// </smpl>
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e3f0b86b
    • H
      net: ipv6: Use BUG_ON · 8242fc33
      由 Himangi Saraogi 提交于 
      The semantic patch that makes the transformation is as follows:

// <smpl>
@@ expression e; @@
-if (e) BUG();
+BUG_ON(e);
// </smpl>
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8242fc33
    • J
      ipv6: addrconf: implement address generation modes · bc91b0f0
      由 Jiri Pirko 提交于 
      This patch introduces a possibility for userspace to set various (so far
two) modes of generating addresses. This is useful for example for
NetworkManager because it can set the mode to NONE and take care of link
local addresses itself. That allow it to have the interface up,
monitoring carrier but still don't have any addresses on it.

One more use-case by Dan Williams:
<quote>
WWAN devices often have their LL address provided by the firmware of the
device, which sometimes refuses to respond to incorrect LL addresses
when doing DHCPv6 or IPv6 ND.  The kernel cannot generate the correct LL
address for two reasons:

1) WWAN pseudo-ethernet interfaces often construct a fake MAC address,
or read a meaningless MAC address from the firmware.  Thus the EUI64 and
the IPv6LL address the kernel assigns will be wrong.  The real LL
address is often retrieved from the firmware with AT or proprietary
commands.

2) WWAN PPP interfaces receive their LL address from IPV6CP, not from
kernel assignments.  Only after IPV6CP has completed do we know the LL
address of the PPP interface and its peer.  But the kernel has already
assigned an incorrect LL address to the interface.

So being able to suppress the kernel LL address generation and assign
the one retrieved from the firmware is less complicated and more robust.
</quote>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bc91b0f0