This switches the nvme driver to use kelvin_to_millicelsius() and
millicelsius_to_kelvin() in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in
<linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This switches the int340x thermal zone driver to use
deci_kelvin_to_millicelsius() and millicelsius_to_deci_kelvin() in
<linux/units.h> instead of helpers in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-6-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This switches the intel_menlow driver to use deci_kelvin_to_celsius()
and celsius_to_deci_kelvin() in <linux/units.h> instead of helpers in
<linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.

This also removes a trailing space, while we're at it.

Link: http://lkml.kernel.org/r/1576386975-7941-5-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The asus-wmi driver doesn't implement the thermal device functionality
directly, so including <linux/thermal.h> just for
DECI_KELVIN_TO_CELSIUS() is a bit odd.

This switches the asus-wmi driver to use deci_kelvin_to_millicelsius()
in <linux/units.h>.

The format string is changed from %d to %ld due to function returned
type.

Link: http://lkml.kernel.org/r/1576386975-7941-4-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This switches the ACPI thermal zone driver to use
celsius_to_deci_kelvin(), deci_kelvin_to_celsius(), and
deci_kelvin_to_millicelsius_with_offset() in <linux/units.h> instead of
helpers in <linux/thermal.h>.

This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-3-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "add header file for kelvin to/from Celsius conversion
helpers", v4.

There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers.  These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just
for the helpers.

This adds a new <linux/units.h> that provides the equivalent inline
functions for any drivers or subsystems, and switches all the users of
conversion helpers in <linux/thermal.h> to use <linux/units.h> helpers.

This patch (of 12):

There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers.  These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just
for the helpers.

This adds a new <linux/units.h> that provides the equivalent inline
functions for any drivers or subsystems.  It is intended to replace the
helpers in <linux/thermal.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-2-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently when an error code -EIO or -ENOSPC in the for-loop of
writeback_store the error code is being overwritten by a ret = len
assignment at the end of the function and the error codes are being
lost.  Fix this by assigning ret = len at the start of the function and
remove the assignment from the end, hence allowing ret to be preserved
when error codes are assigned to it.

Addresses Coverity ("Unused value")

Link: http://lkml.kernel.org/r/20191128122958.178290-1-colin.king@canonical.com
Fixes: a939888e ("zram: support idle/huge page writeback")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The worst-case scenario on finding same element pages is that almost all
elements are same at the first glance but only last few elements are
different.

Since the same element tends to be grouped from the beginning of the
pages, if we check the first element with the last element before
looping through all elements, we might have some chances to quickly
detect non-same element pages.

 1. Test is done under LG webOS TV (64-bit arch)
 2. Dump the swap-out pages (~819200 pages)
 3. Analyze the pages with simple test script which counts the iteration
    number and measures the speed at off-line

Under 64-bit arch, the worst iteration count is PAGE_SIZE / 8 bytes =
512.  The speed is based on the time to consume page_same_filled()
function only.  The result, on average, is listed as below:

                                     Num of Iter    Speed(MB/s)
  Looping-Forward (Orig)                 38            99265
  Looping-Backward                       36           102725
  Last-element-check (This Patch)        33           125072

The result shows that the average iteration count decreases by 13% and
the speed increases by 25% with this patch.  This patch does not
increase the overall time complexity, though.

I also ran simpler version which uses backward loop.  Just looping
backward also makes some improvement, but less than this patch.

[taejoon.song@lge.com: fix off-by-one]
  Link: http://lkml.kernel.org/r/1578642001-11765-1-git-send-email-taejoon.song@lge.com
Link: http://lkml.kernel.org/r/1575424418-16119-1-git-send-email-taejoon.song@lge.comSigned-off-by: NTaejoon Song <taejoon.song@lge.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As zone reclaim has been replaced by node reclaim, this patch fixes
related comments.

Link: http://lkml.kernel.org/r/20191126141346.GA22665@haolee.github.ioSigned-off-by: NHao Lee <haolee.swjtu@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memory_block structure elements 'hw' and 'phys_callback' are not getting
used.  This was originally added with commit 3947be19 ("[PATCH]
memory hotplug: sysfs and add/remove functions") but never seem to have
been used.  Just drop them now.

Link: http://lkml.kernel.org/r/1576728650-13867-1-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

totalram_pages_set() was introduced in commit ca79b0c2 ("mm: convert
totalram_pages and totalhigh_pages variables to atomic"), but no one
uses it.

Link: http://lkml.kernel.org/r/20191218005543.24146-1-richardw.yang@linux.intel.comSigned-off-by: NWei Yang <richardw.yang@linux.intel.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The check was intended to make sure we don't overrun page flags.  But
it's obsolete because it doesn't include LAST_CPUPID_WIDTH nor
KASAN_TAG_WIDTH.

Just remove check since we already have it covered in
linux/page-flags-layout.h (near the end of the file).

Link: http://lkml.kernel.org/r/20191208183508.89177-1-yuzhao@google.comSigned-off-by: NYu Zhao <yuzhao@google.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "pool" pointer can be NULL at the end of the init_zswap().  (We
would allocate a new pool later in that situation)

So in the error handling then we need to make sure pool is a valid
pointer before calling "zswap_pool_destroy(pool);" because that function
dereferences the argument.

Link: http://lkml.kernel.org/r/20200114050902.og32fkllkod5ycf5@kili.mountain
Fixes: 93d4dfa9fbd0 ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

zswap will always try to shrink pool when zswap is full.  If there is a
high pressure on zswap it will result in flipping pages in and out zswap
pool without any real benefit, and the overall system performance will
drop.  The previous discussion on this subject [1] ended up with a
suggestion to implement a sort of hysteresis to refuse taking pages into
zswap pool until it has sufficient space if the limit has been hit.
This is my take on this.

Hysteresis is controlled with a sysfs-configurable parameter (namely,
/sys/kernel/debug/zswap/accept_threhsold_percent).  It specifies the
threshold at which zswap would start accepting pages again after it
became full.  Setting this parameter to 100 disables the hysteresis and
sets the zswap behavior to pre-hysteresis state.

[1] https://lkml.org/lkml/2019/11/8/949

Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.comSigned-off-by: NVitaly Wool <vitaly.wool@konsulko.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It makes sense to call the WARN_ON_ONCE(zone_idx(zone) == ZONE_MOVABLE)
from start_isolate_page_range(), but should avoid triggering it from
userspace, i.e, from is_mem_section_removable() because it could crash
the system by a non-root user if warn_on_panic is set.

While at it, simplify the code a bit by removing an unnecessary jump
label.

Link: http://lkml.kernel.org/r/20200120163915.1469-1-cai@lca.pwSigned-off-by: NQian Cai <cai@lca.pw>
Suggested-by: NMichal Hocko <mhocko@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It is not that hard to trigger lockdep splats by calling printk from
under zone->lock.  Most of them are false positives caused by lock
chains introduced early in the boot process and they do not cause any
real problems (although most of the early boot lock dependencies could
happen after boot as well).  There are some console drivers which do
allocate from the printk context as well and those should be fixed.  In
any case, false positives are not that trivial to workaround and it is
far from optimal to lose lockdep functionality for something that is a
non-issue.

So change has_unmovable_pages() so that it no longer calls dump_page()
itself - instead it returns a "struct page *" of the unmovable page back
to the caller so that in the case of a has_unmovable_pages() failure,
the caller can call dump_page() after releasing zone->lock.  Also, make
dump_page() is able to report a CMA page as well, so the reason string
from has_unmovable_pages() can be removed.

Even though has_unmovable_pages doesn't hold any reference to the
returned page this should be reasonably safe for the purpose of
reporting the page (dump_page) because it cannot be hotremoved in the
context of memory unplug.  The state of the page might change but that
is the case even with the existing code as zone->lock only plays role
for free pages.

While at it, remove a similar but unnecessary debug-only printk() as
well.  A sample of one of those lockdep splats is,

  WARNING: possible circular locking dependency detected
  ------------------------------------------------------
  test.sh/8653 is trying to acquire lock:
  ffffffff865a4460 (console_owner){-.-.}, at:
  console_unlock+0x207/0x750

  but task is already holding lock:
  ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
  __offline_isolated_pages+0x179/0x3e0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #3 (&(&zone->lock)->rlock){-.-.}:
         __lock_acquire+0x5b3/0xb40
         lock_acquire+0x126/0x280
         _raw_spin_lock+0x2f/0x40
         rmqueue_bulk.constprop.21+0xb6/0x1160
         get_page_from_freelist+0x898/0x22c0
         __alloc_pages_nodemask+0x2f3/0x1cd0
         alloc_pages_current+0x9c/0x110
         allocate_slab+0x4c6/0x19c0
         new_slab+0x46/0x70
         ___slab_alloc+0x58b/0x960
         __slab_alloc+0x43/0x70
         __kmalloc+0x3ad/0x4b0
         __tty_buffer_request_room+0x100/0x250
         tty_insert_flip_string_fixed_flag+0x67/0x110
         pty_write+0xa2/0xf0
         n_tty_write+0x36b/0x7b0
         tty_write+0x284/0x4c0
         __vfs_write+0x50/0xa0
         vfs_write+0x105/0x290
         redirected_tty_write+0x6a/0xc0
         do_iter_write+0x248/0x2a0
         vfs_writev+0x106/0x1e0
         do_writev+0xd4/0x180
         __x64_sys_writev+0x45/0x50
         do_syscall_64+0xcc/0x76c
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  -> #2 (&(&port->lock)->rlock){-.-.}:
         __lock_acquire+0x5b3/0xb40
         lock_acquire+0x126/0x280
         _raw_spin_lock_irqsave+0x3a/0x50
         tty_port_tty_get+0x20/0x60
         tty_port_default_wakeup+0xf/0x30
         tty_port_tty_wakeup+0x39/0x40
         uart_write_wakeup+0x2a/0x40
         serial8250_tx_chars+0x22e/0x440
         serial8250_handle_irq.part.8+0x14a/0x170
         serial8250_default_handle_irq+0x5c/0x90
         serial8250_interrupt+0xa6/0x130
         __handle_irq_event_percpu+0x78/0x4f0
         handle_irq_event_percpu+0x70/0x100
         handle_irq_event+0x5a/0x8b
         handle_edge_irq+0x117/0x370
         do_IRQ+0x9e/0x1e0
         ret_from_intr+0x0/0x2a
         cpuidle_enter_state+0x156/0x8e0
         cpuidle_enter+0x41/0x70
         call_cpuidle+0x5e/0x90
         do_idle+0x333/0x370
         cpu_startup_entry+0x1d/0x1f
         start_secondary+0x290/0x330
         secondary_startup_64+0xb6/0xc0

  -> #1 (&port_lock_key){-.-.}:
         __lock_acquire+0x5b3/0xb40
         lock_acquire+0x126/0x280
         _raw_spin_lock_irqsave+0x3a/0x50
         serial8250_console_write+0x3e4/0x450
         univ8250_console_write+0x4b/0x60
         console_unlock+0x501/0x750
         vprintk_emit+0x10d/0x340
         vprintk_default+0x1f/0x30
         vprintk_func+0x44/0xd4
         printk+0x9f/0xc5

  -> #0 (console_owner){-.-.}:
         check_prev_add+0x107/0xea0
         validate_chain+0x8fc/0x1200
         __lock_acquire+0x5b3/0xb40
         lock_acquire+0x126/0x280
         console_unlock+0x269/0x750
         vprintk_emit+0x10d/0x340
         vprintk_default+0x1f/0x30
         vprintk_func+0x44/0xd4
         printk+0x9f/0xc5
         __offline_isolated_pages.cold.52+0x2f/0x30a
         offline_isolated_pages_cb+0x17/0x30
         walk_system_ram_range+0xda/0x160
         __offline_pages+0x79c/0xa10
         offline_pages+0x11/0x20
         memory_subsys_offline+0x7e/0xc0
         device_offline+0xd5/0x110
         state_store+0xc6/0xe0
         dev_attr_store+0x3f/0x60
         sysfs_kf_write+0x89/0xb0
         kernfs_fop_write+0x188/0x240
         __vfs_write+0x50/0xa0
         vfs_write+0x105/0x290
         ksys_write+0xc6/0x160
         __x64_sys_write+0x43/0x50
         do_syscall_64+0xcc/0x76c
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  other info that might help us debug this:

  Chain exists of:
    console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&(&zone->lock)->rlock);
                                 lock(&(&port->lock)->rlock);
                                 lock(&(&zone->lock)->rlock);
    lock(console_owner);

   *** DEADLOCK ***

  9 locks held by test.sh/8653:
   #0: ffff88839ba7d408 (sb_writers#4){.+.+}, at:
  vfs_write+0x25f/0x290
   #1: ffff888277618880 (&of->mutex){+.+.}, at:
  kernfs_fop_write+0x128/0x240
   #2: ffff8898131fc218 (kn->count#115){.+.+}, at:
  kernfs_fop_write+0x138/0x240
   #3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at:
  lock_device_hotplug_sysfs+0x16/0x50
   #4: ffff8884374f4990 (&dev->mutex){....}, at:
  device_offline+0x70/0x110
   #5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at:
  __offline_pages+0xbf/0xa10
   #6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at:
  percpu_down_write+0x87/0x2f0
   #7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
  __offline_isolated_pages+0x179/0x3e0
   #8: ffffffff865a4920 (console_lock){+.+.}, at:
  vprintk_emit+0x100/0x340

  stack backtrace:
  Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10,
  BIOS U34 05/21/2019
  Call Trace:
   dump_stack+0x86/0xca
   print_circular_bug.cold.31+0x243/0x26e
   check_noncircular+0x29e/0x2e0
   check_prev_add+0x107/0xea0
   validate_chain+0x8fc/0x1200
   __lock_acquire+0x5b3/0xb40
   lock_acquire+0x126/0x280
   console_unlock+0x269/0x750
   vprintk_emit+0x10d/0x340
   vprintk_default+0x1f/0x30
   vprintk_func+0x44/0xd4
   printk+0x9f/0xc5
   __offline_isolated_pages.cold.52+0x2f/0x30a
   offline_isolated_pages_cb+0x17/0x30
   walk_system_ram_range+0xda/0x160
   __offline_pages+0x79c/0xa10
   offline_pages+0x11/0x20
   memory_subsys_offline+0x7e/0xc0
   device_offline+0xd5/0x110
   state_store+0xc6/0xe0
   dev_attr_store+0x3f/0x60
   sysfs_kf_write+0x89/0xb0
   kernfs_fop_write+0x188/0x240
   __vfs_write+0x50/0xa0
   vfs_write+0x105/0x290
   ksys_write+0xc6/0x160
   __x64_sys_write+0x43/0x50
   do_syscall_64+0xcc/0x76c
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pwSigned-off-by: NQian Cai <cai@lca.pw>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/memory_hotplug: pass in nid to online_pages()".

Simplify onlining code and get rid of find_memory_block().  Pass in the
nid from the memory block we are trying to online directly, instead of
manually looking it up.

This patch (of 2):

No need to lookup the memory block, we can directly pass in the nid.

Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The jump labels try_prev and none are not really needed in
find_mergeable_anon_vma(), eliminate them to improve readability.

Link: http://lkml.kernel.org/r/1574079844-17493-1-git-send-email-linmiaohe@huawei.comSigned-off-by: NMiaohe Lin <linmiaohe@huawei.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Reviewed-by: NWei Yang <richardw.yang@linux.intel.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If thp defrag setting "defer" is used and a newline is *not* used when
writing to the sysfs file, this is interpreted as the "defer+madvise"
option.

This is because we do prefix matching and if five characters are written
without a newline, the current code ends up comparing to the first five
bytes of the "defer+madvise" option and using that instead.

Use the more appropriate sysfs_streq() that handles the trailing newline
for us.  Since this doubles as a nice cleanup, do it in enabled_store()
as well.

The current implementation relies on prefix matching: the number of
bytes compared is either the number of bytes written or the length of
the option being compared.  With a newline, "defer\n" does not match
"defer+"madvise"; without a newline, however, "defer" is considered to
match "defer+madvise" (prefix matching is only comparing the first five
bytes).  End result is that writing "defer" is broken unless it has an
additional trailing character.

This means that writing "madv" in the past would match and set
"madvise".  With strict checking, that no longer is the case but it is
unlikely anybody is currently doing this.

Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001171411020.56385@chino.kir.corp.google.com
Fixes: 21440d7e ("mm, thp: add new defer+madvise defrag option")
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

migrate_vma_insert_page() closely follows the code in:
  __handle_mm_fault()
    handle_pte_fault()
      do_anonymous_page()

Add a call to check_stable_address_space() after locking the page table
entry before inserting a ZONE_DEVICE private zero page mapping similar
to page faulting a new anonymous page.

Link: http://lkml.kernel.org/r/20200107211208.24595-4-rcampbell@nvidia.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix some comment typos and coding style clean up in preparation for the
next patch.  No functional changes.

Link: http://lkml.kernel.org/r/20200107211208.24595-3-rcampbell@nvidia.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Acked-by: NChris Down <chris@chrisdown.name>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Addresses passed to walk_page_range() callback functions are already
page aligned and don't need to be masked with PAGE_MASK.

Link: http://lkml.kernel.org/r/20200107211208.24595-2-rcampbell@nvidia.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

split_queue_lock protects data in struct deferred_split.  We can release
the lock after delete the page from deferred_split_queue.

This patch moves the THP accounting out of the lock protection, which is
introduced in commit 65c45377 ("mm, rmap: account shmem thp pages").

Link: http://lkml.kernel.org/r/20200110025516.23996-1-richardw.yang@linux.intel.comSigned-off-by: NWei Yang <richardw.yang@linux.intel.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During split huge page, it checks the property of the page.  Currently
we do the check on page and head without emphasizing the check is on the
compound page.  In case the page passed to split_huge_page_to_list is a
tail page, audience would take some time to think about whether the
check is on compound page or tail page itself.

To make it explicit, use head instead of page for those checks.  After
this, audience would be more clear about the checks are on compound page
and the page is used to do the split and dump error message if failed.

Link: http://lkml.kernel.org/r/20200110032610.26499-2-richardw.yang@linux.intel.comSigned-off-by: NWei Yang <richardw.yang@linux.intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The page could be a tail page, if this is the case, this BUG_ON will
never be triggered.

Link: http://lkml.kernel.org/r/20200110032610.26499-1-richardw.yang@linux.intel.com
Fixes: e9b61f19 ("thp: reintroduce split_huge_page()")
Signed-off-by: NWei Yang <richardw.yang@linux.intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a process cannot be oom reaped, for whatever reason, currently the
list of locks that are held is currently dumped to the kernel log.

Much more interesting is the stack trace of the victim that cannot be
reaped.  If the stack trace is dumped, we have the ability to find
related occurrences in the same kernel code and hopefully solve the
issue that is making it wedged.

Dump the stack trace when a process fails to be oom reaped.

Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001141519280.200484@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace open function name strings with %s (__func__) in all remaining
memblock_dbg() call sites.

Link: http://lkml.kernel.org/r/1578285510-28261-1-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On the s390 platform memblock.physmem array is being built by directly
calling into memblock_add_range() which is a low level function not
intended to be used outside of memblock.  Hence lets conditionally add
helper functions for physmem array when HAVE_MEMBLOCK_PHYS_MAP is
enabled.  Also use MAX_NUMNODES instead of 0 as node ID similar to
memblock_add() and memblock_reserve().  Make memblock_add_range() a
static function as it is no longer getting used outside of memblock.

Link: http://lkml.kernel.org/r/1578283835-21969-1-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Collin Walling <walling@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sysfs file name for enabling sanity checking is called
'sanity_checks' and not 'sanity'.

The name of the file has never changed since the introduction of the
slub allocator.  Obviously, most people turn the checks on via the
command line option and not during runtime using slabinfo.

Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.deSigned-off-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 1b2ffb78 ("[PATCH] Zone reclaim: Allow modification of zone
reclaim behavior")' defined RECLAIM_OFF/RECLAIM_ZONE, but never use
them, so better to remove them.

[dwagner@suse.de: fix sanity checks enabling]
  Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de
[akpm@linux-foundation.org: renumber the bits for neatness]
Link: http://lkml.kernel.org/r/1579005573-58923-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This macro was never used in git history.  So better to remove.

Link: http://lkml.kernel.org/r/1579006500-127143-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The return value of shrink_node is not used, so remove unnecessary
operations.

Link: http://lkml.kernel.org/r/20191128143524.3223-1-fishland@aliyun.comSigned-off-by: NLiu Song <liu.song11@zte.com.cn>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that the memory isolate notifier is gone, the parameter is always 0.
Drop it and cleanup has_unmovable_pages().

Link: http://lkml.kernel.org/r/20191114131911.11783-3-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Luckily, we have no users left, so we can get rid of it.  Cleanup
set_migratetype_isolate() a little bit.

Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qian Cai <cai@lca.pw>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

memmap_init_zone() can be called on the ranges with holes during the
boot.  It will skip any non-valid PFNs one-by-one.  It works fine as
long as holes are not too big.

But huge holes in the memory map causes a problem.  It takes over 20
seconds to walk 32TiB hole.  x86-64 with 5-level paging allows for much
larger holes in the memory map which would practically hang the system.

Deferred struct page init doesn't help here.  It only works on the
present ranges.

Skipping non-present sections would fix the issue.

Link: http://lkml.kernel.org/r/20191230093828.24613-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NBaoquan He <bhe@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

%pa takes into consideration the special types such as resource_size_t.
Use this specifier %instead of explicit casting.

Link: http://lkml.kernel.org/r/20191209165413.56263-1-andriy.shevchenko@linux.intel.comSigned-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case memory resources for _ptr2_ were allocated, release them before
return.

Notice that in case _ptr1_ happens to be NULL, krealloc() behaves
exactly like kmalloc().

Addresses-Coverity-ID: 1490594 ("Resource leak")
Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor
Fixes: 3f15801c ("lib: add kasan test module")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Print the call_site ip of kmem_alloc_node using '%pS' to improve the
readability of raw slab trace points.

Link: http://lkml.kernel.org/r/1577949568-4518-1-git-send-email-sunjunyong@xiaomi.comSigned-off-by: NJunyong Sun <sunjunyong@xiaomi.com>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When check_pte, pfn of normal, hugetlbfs and THP page need be compared.
The current implementation apply comparison as

- normal 4K page: page_pfn <= pfn < page_pfn + 1
- hugetlbfs page:  page_pfn <= pfn < page_pfn + HPAGE_PMD_NR
- THP page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR

in pfn_in_hpage.  For hugetlbfs page, it should be page_pfn == pfn

Now, change pfn_in_hpage to pfn_is_match to highlight that comparison is
not only for THP and explicitly compare for these cases.

No impact upon current behavior, just make the code clear.  I think it
is important to make the code clear - comparing hugetlbfs page in range
page_pfn <= pfn < page_pfn + HPAGE_PMD_NR is confusing.

Link: http://lkml.kernel.org/r/1578737885-8890-1-git-send-email-lixinhai.lxh@gmail.comSigned-off-by: NLi Xinhai <lixinhai.lxh@gmail.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>