This is a preparation step to implement lockless allocation path when
there is no free objects in kmem_cache.

What we'd like to do here is to refill cpu cache without holding a node
lock.  To accomplish this purpose, refill should be done after new slab
allocation but before attaching the slab to the management list.  So,
this patch separates cache_grow() to two parts, allocation and attaching
to the list in order to add some code inbetween them in the following
patch.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, cache_grow() assumes that allocated page's nodeid would be
same with parameter nodeid which is used for allocation request.  If we
discard this assumption, we can handle fallback_alloc() case gracefully.
So, this patch makes cache_grow() handle the page allocated on arbitrary
node and clean-up relevant code.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Slab color isn't needed to be changed strictly.  Because locking for
changing slab color could cause more lock contention so this patch
implements racy access/modify the slab color.  This is a preparation
step to implement lockless allocation path when there is no free objects
in the kmem_cache.

Below is the result of concurrent allocation/free in slab allocation
benchmark made by Christoph a long time ago.  I make the output simpler.
The number shows cycle count during alloc/free respectively so less is
better.

  * Before
  Kmalloc N*alloc N*free(32): Average=365/806
  Kmalloc N*alloc N*free(64): Average=452/690
  Kmalloc N*alloc N*free(128): Average=736/886
  Kmalloc N*alloc N*free(256): Average=1167/985
  Kmalloc N*alloc N*free(512): Average=2088/1125
  Kmalloc N*alloc N*free(1024): Average=4115/1184
  Kmalloc N*alloc N*free(2048): Average=8451/1748
  Kmalloc N*alloc N*free(4096): Average=16024/2048

  * After
  Kmalloc N*alloc N*free(32): Average=355/750
  Kmalloc N*alloc N*free(64): Average=452/812
  Kmalloc N*alloc N*free(128): Average=559/1070
  Kmalloc N*alloc N*free(256): Average=1176/980
  Kmalloc N*alloc N*free(512): Average=1939/1189
  Kmalloc N*alloc N*free(1024): Average=3521/1278
  Kmalloc N*alloc N*free(2048): Average=7152/1838
  Kmalloc N*alloc N*free(4096): Average=13438/2013

It shows that contention is reduced for object size >= 1024 and
performance increases by roughly 15%.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, determination to free a slab is done whenever each freed
object is put into the slab.  This has a following problem.

Assume free_limit = 10 and nr_free = 9.

Free happens as following sequence and nr_free changes as following.

free(become a free slab) free(not become a free slab) nr_free: 9 -> 10
(at first free) -> 11 (at second free)

If we try to check if we can free current slab or not on each object
free, we can't free any slab in this situation because current slab
isn't a free slab when nr_free exceed free_limit (at second free) even
if there is a free slab.

However, if we check it lastly, we can free 1 free slab.

This problem would cause to keep too much memory in the slab subsystem.
This patch try to fix it by checking number of free object after all
free work is done.  If there is free slab at that time, we can free slab
as much as possible so we keep free slab as minimal.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are mostly same code for setting up kmem_cache_node either in
cpuup_prepare() or alloc_kmem_cache_node().  Factor out and clean-up
them.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: NNishanth Menon <nm@ti.com>
Tested-by: NJon Hunter <jonathanh@nvidia.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It can be reused on other place, so factor out it.  Following patch will
use it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

slabs_tofree() implies freeing all free slab.  We can do it with just
providing INT_MAX.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Initial attemp to remove BAD_ALIEN_MAGIC is once reverted by 'commit
edcad250 ("Revert "slab: remove BAD_ALIEN_MAGIC"")' because it
causes a problem on m68k which has many node but !CONFIG_NUMA.  In this
case, although alien cache isn't used at all but to cope with some
initialization path, garbage value is used and that is BAD_ALIEN_MAGIC.
Now, this patch set use_alien_caches to 0 when !CONFIG_NUMA, there is no
initialization path problem so we don't need BAD_ALIEN_MAGIC at all.  So
remove it.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While processing concurrent allocation, SLAB could be contended a lot
because it did a lots of work with holding a lock.  This patchset try to
reduce the number of critical section to reduce lock contention.  Major
changes are lockless decision to allocate more slab and lockless cpu
cache refill from the newly allocated slab.

Below is the result of concurrent allocation/free in slab allocation
benchmark made by Christoph a long time ago.  I make the output simpler.
The number shows cycle count during alloc/free respectively so less is
better.

  * Before
  Kmalloc N*alloc N*free(32): Average=365/806
  Kmalloc N*alloc N*free(64): Average=452/690
  Kmalloc N*alloc N*free(128): Average=736/886
  Kmalloc N*alloc N*free(256): Average=1167/985
  Kmalloc N*alloc N*free(512): Average=2088/1125
  Kmalloc N*alloc N*free(1024): Average=4115/1184
  Kmalloc N*alloc N*free(2048): Average=8451/1748
  Kmalloc N*alloc N*free(4096): Average=16024/2048

  * After
  Kmalloc N*alloc N*free(32): Average=344/792
  Kmalloc N*alloc N*free(64): Average=347/882
  Kmalloc N*alloc N*free(128): Average=390/959
  Kmalloc N*alloc N*free(256): Average=393/1067
  Kmalloc N*alloc N*free(512): Average=683/1229
  Kmalloc N*alloc N*free(1024): Average=1295/1325
  Kmalloc N*alloc N*free(2048): Average=2513/1664
  Kmalloc N*alloc N*free(4096): Average=4742/2172

It shows that performance improves greatly (roughly more than 50%) for
the object class whose size is more than 128 bytes.

This patch (of 11):

If we don't hold neither the slab_mutex nor the node lock, node's shared
array cache could be freed and re-populated.  If __kmem_cache_shrink()
is called at the same time, it will call drain_array() with n->shared
without holding node lock so problem can happen.  This patch fix the
situation by holding the node lock before trying to drain the shared
array.

In addition, add a debug check to confirm that n->shared access race
doesn't exist.
Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A recent cleanup removed some exported functions that were not used
anywhere, which in turn exposed the fact that some other functions in
the same file are only used in some configurations.

We now get a warning about them when CONFIG_HOTPLUG_CPU is disabled:

  kernel/padata.c:670:12: error: '__padata_remove_cpu' defined but not used [-Werror=unused-function]
   static int __padata_remove_cpu(struct padata_instance *pinst, int cpu)
              ^~~~~~~~~~~~~~~~~~~
  kernel/padata.c:650:12: error: '__padata_add_cpu' defined but not used [-Werror=unused-function]
   static int __padata_add_cpu(struct padata_instance *pinst, int cpu)

This rearranges the code so the __padata_remove_cpu/__padata_add_cpu
functions are within the #ifdef that protects the code that calls them.

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 4ba6d78c671e ("kernel/padata.c: removed unused code")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Richard Cochran <rcochran@linutronix.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

By accident I stumbled across code that has never been used.  This
driver has EXPORT_SYMBOL functions, and the only user of the code is
pcrypt.c, but this only uses a subset of the exported symbols.

According to 'git log -G', the functions, padata_set_cpumasks,
padata_add_cpu, and padata_remove_cpu have never been used since they
were first introduced.  This patch removes the unused code.

On one 64 bit build, with CRYPTO_PCRYPT built in, the text is more than
4k smaller.

  kbuild_hp> size $KBUILD_OUTPUT/vmlinux
      text    data     bss      dec hex    filename
  10566658 4678360 1122304 16367322 f9beda vmlinux
  10561984 4678360 1122304 16362648 f9ac98 vmlinux

On another config, 32 bit, the saving is about 0.5k bytes.

  kbuild_hp-x86> size $KBUILD_OUTPUT/vmlinux
  6012005 2409513 2785280 11206798 ab008e vmlinux
  6011491 2409513 2785280 11206284 aafe8c vmlinux
Signed-off-by: NRichard Cochran <rcochran@linutronix.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The goto is not useful in ocfs2_put_slot(), so delete it.
Signed-off-by: NGuozhonghua <guozhonghua@h3c.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up unused parameter 'count' in o2hb_read_block_input().
Signed-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up an unused variable 'wants_rotate' in ocfs2_truncate_rec.
Signed-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The comment in ocfs2_extended_slot has the offset wrong.

Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When activating a static object we need make sure that the object is
tracked in the object tracker.  If it is a non-static object then the
activation is illegal.

In previous implementation, each subsystem need take care of this in
their fixup callbacks.  Actually we can put it into debugobjects core.
Thus we can save duplicated code, and have *pure* fixup callbacks.

To achieve this, a new callback "is_static_object" is introduced to let
the type specific code decide whether a object is static or not.  If
yes, we take it into object tracker, otherwise give warning and invoke
fixup callback.

This change has paassed debugobjects selftest, and I also do some test
with all debugobjects supports enabled.

At last, I have a concern about the fixups that can it change the object
which is in incorrect state on fixup? Because the 'addr' may not point
to any valid object if a non-static object is not tracked.  Then Change
such object can overwrite someone's memory and cause unexpected
behaviour.  For example, the timer_fixup_activate bind timer to function
stub_timer.

Link: http://lkml.kernel.org/r/1462576157-14539-1-git-send-email-changbin.du@intel.com
[changbin.du@intel.com: improve code comments where invoke the new is_static_object callback]
  Link: http://lkml.kernel.org/r/1462777431-8171-1-git-send-email-changbin.du@intel.comSigned-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update documentation creangponding to change(debugobjects: make fixup
functions return bool instead of int).
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the return type to use bool instead of int, corresponding to
cheange (debugobjects: make fixup functions return bool instead of int).
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the return type to use bool instead of int, corresponding to
cheange (debugobjects: make fixup functions return bool instead of int).
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the return type to use bool instead of int, corresponding to
cheange (debugobjects: make fixup functions return bool instead of int).
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the return type to use bool instead of int, corresponding to
change (debugobjects: make fixup functions return bool instead of int)
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If debug_object_fixup() return non-zero when problem has been fixed.
But the code got it backwards, it taks 0 as fixup successfully.  So fix
it.
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I am going to introduce debugobjects infrastructure to USB subsystem.
But before this, I found the code of debugobjects could be improved.
This patchset will make fixup functions return bool type instead of int.
Because fixup only need report success or no.  boolean is the 'real'
type.

This patch (of 7):

The object debugging infrastructure core provides some fixup callbacks
for the subsystem who use it.  These callbacks are called from the debug
code whenever a problem in debug_object_init is detected.  And
debugobjects core suppose them returns 1 when the fixup was successful,
otherwise 0.  So the return type is boolean.

A bad thing is that debug_object_fixup use the return value for
arithmetic operation.  It confused me that what is the reall return
type.

Reading over the whole code, I found some place do use the return value
incorrectly(see next patch).  So why use bool type instead?
Signed-off-by: NDu, Changbin <changbin.du@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Triplett <josh@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds an additional line of output (to reduce the chances of
breaking any existing output parsers) which prints the total size before
and after and the relative difference.

  add/remove: 39/0 grow/shrink: 12408/55 up/down: 362227/-1430 (360797)
  function                                     old     new   delta
  ext4_fill_super                            10556   12590   +2034
  _fpadd_parts                                   -    1186   +1186
  ntfs_fill_super                             5340    6164    +824
  ...
  ...
  __divdf3                                     752     386    -366
  unlzma                                      3682    3274    -408
  Total: Before=5023101, After=5383898, chg 7.000000%
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Link: http://lkml.kernel.org/r/1463124110-30314-1-git-send-email-vgupta@synopsys.comSigned-off-by: NVineet Gupta <vgupta@synopsys.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A few instances of "fimware" instead of "firmware" were found.  Fix
these and add it to the spelling.txt file.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

scripts/decode_stacktrace.sh presently displays module symbols as

	func+0x0ff/0x5153 [module]

Add a third argument: the pathname of a directory where the script
should look for the file module.ko so that the output appears as

	func (foo/bar.c:123) module

Without the argument or if the module file isn't found the script prints
such symbols as is without decoding.
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All references to timespec_add_safe() now use timespec64_add_safe().

The plan is to replace struct timespec references with struct timespec64
throughout the kernel as timespec is not y2038 safe.

Drop timespec_add_safe() and use timespec64_add_safe() for all
architectures.

Link: http://lkml.kernel.org/r/1461947989-21926-4-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct timespec is not y2038 safe.  Even though timespec might be
sufficient to represent timeouts, use struct timespec64 here as the plan
is to get rid of all timespec reference in the kernel.

The patch transitions the common functions: poll_select_set_timeout()
and select_estimate_accuracy() to use timespec64.  And, all the syscalls
that use these functions are transitioned in the same patch.

The restart block parameters for poll uses monotonic time.  Use
timespec64 here as well to assign timeout value.  This parameter in the
restart block need not change because this only holds the monotonic
timestamp at which timeout should occur.  And, unsigned long data type
should be big enough for this timestamp.

The system call interfaces will be handled in a separate series.

Compat interfaces need not change as timespec64 is an alias to struct
timespec on a 64 bit system.

Link: http://lkml.kernel.org/r/1461947989-21926-3-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

timespec64_add_safe() has been defined in time64.h for 64 bit systems.
But, 32 bit systems only have an extern function prototype defined.
Provide a definition for the above function.

The function will be necessary as part of y2038 changes.  struct
timespec is not y2038 safe.  All references to timespec will be replaced
by struct timespec64.  The function is meant to be a replacement for
timespec_add_safe().

The implementation is similar to timespec_add_safe().

Link: http://lkml.kernel.org/r/1461947989-21926-2-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Inotify instance is destroyed when all references to it are dropped.
That not only means that the corresponding file descriptor needs to be
closed but also that all corresponding instance marks are freed (as each
mark holds a reference to the inotify instance).  However marks are
freed only after SRCU period ends which can take some time and thus if
user rapidly creates and frees inotify instances, number of existing
inotify instances can exceed max_user_instances limit although from user
point of view there is always at most one existing instance.  Thus
inotify_init() returns EMFILE error which is hard to justify from user
point of view.  This problem is exposed by LTP inotify06 testcase on
some machines.

We fix the problem by making sure all group marks are properly freed
while destroying inotify instance.  We wait for SRCU period to end in
that path anyway since we have to make sure there is no event being
added to the instance while we are tearing down the instance.  So it
takes only some plumbing to allow for marks to be destroyed in that path
as well and not from a dedicated work item.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NJan Kara <jack@suse.cz>
Reported-by: NXiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Tested-by: NXiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull tracing updates from Steven Rostedt:
 "This includes two new updates for the ftrace infrastructure.

   - With the changing of the code for filtering events by pid, from a
     list of pids to a bitmask, we can now easily implement following
     forks.  With a new tracing option "event-fork" which, when set,
     will have tasks with pids in set_event_pid, when they fork, to have
     their child pids added to set_event_pid and the child will be
     traced as well.

     Note, if "event-fork" is set and a task with its pid in
     set_event_pid exits, its pid will be removed from set_event_pid

   - The addition of Tom Zanussi's hist triggers.  This includes a very
     thorough documentatino on how to use the hist triggers with events.
     This introduces a quick and easy way to get histogram data from
     events and their fields.

  Some other cleanups and updates were added as well.  Like Masami
  Hiramatsu added test cases for the event trigger and hist triggers.
  Also I added a speed up of filtering by using a temp buffer when
  filters are set"

* tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Use temp buffer when filtering events
  tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic
  tracing: Remove unused function trace_current_buffer_lock_reserve()
  tracing: Remove one use of trace_current_buffer_lock_reserve()
  tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL
  tracing: Remove unused function trace_current_buffer_discard_commit()
  tracing: Move trace_buffer_unlock_commit{_regs}() to local header
  tracing: Fold filter_check_discard() into its only user
  tracing: Make filter_check_discard() local
  tracing: Move event_trigger_unlock_commit{_regs}() to local header
  tracing: Don't use the address of the buffer array name in copy_from_user
  tracing: Handle tracing_map_alloc_elts() error path correctly
  tracing: Add check for NULL event field when creating hist field
  tracing: checking for NULL instead of IS_ERR()
  tracing: Do not inherit event-fork option for instances
  tracing: Fix unsigned comparison to zero in hist trigger code
  kselftests/ftrace: Add a test for log2 modifier of hist trigger
  tracing: Add hist trigger 'log2' modifier
  kselftests/ftrace: Add hist trigger testcases
  kselftests/ftrace : Add event trigger testcases
  ...

Pull audit updates from Paul Moore:
 "Four small audit patches for 4.7.

  Two are simple cleanups around the audit thread management code, one
  adds a tty field to AUDIT_LOGIN events, and the final patch makes
  tty_name() usable regardless of CONFIG_TTY.

  Nothing controversial, and it all passes our regression test"

* 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit:
  tty: provide tty_name() even without CONFIG_TTY
  audit: add tty field to LOGIN event
  audit: we don't need to __set_current_state(TASK_RUNNING)
  audit: cleanup prune_tree_thread

Pull remoteproc updates from Bjorn Andersson:
 "Introduce a synchronization point between the async firmware loading
  and clients requesting the remote processor to boot, as well as
  support for remote processors that are not interested in the resource
  table information"

* tag 'rproc-v4.7' of git://github.com/andersson/remoteproc:
  remoteproc: Add additional crash reasons
  remoteproc: core: Make the loaded resource table optional
  remoteproc: core: Task sync during rproc_fw_boot()

Pull rpmsg updates from Bjorn Andersson:
 "Refactor rpmsg module registration to follow other subsystems; by
  introduction of module_rpmsg_driver and hiding of THIS_MODULE from
  clients"

* tag 'rpmsg-v4.7' of git://github.com/andersson/remoteproc:
  rpmsg: use module_rpmsg_driver in existing drivers and examples
  rpmsg: add helper macro module_rpmsg_driver
  rpmsg: drop owner assignment from rpmsg_drivers
  rpmsg: add THIS_MODULE to rpmsg_driver in rpmsg core

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.  No new drivers here,
  just some driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: rotary-encoder - fix bare use of 'unsigned'
  Input: cm109 - spin_lock in complete() cleanup
  Input: cm109 - fix handling of volume and mute buttons
  Input: byd - don't wipe dynamically allocated memory twice
  Input: twl4030 - fix unsafe macro definition
  Input: twl6040-vibra - remove mutex
  Input: bcm_iproc_tsc - DT spelling s/clock-name/clock-names/
  Input: bcm_iproc_tsc - use syscon to access shared registers
  Input: ti_am335x_tsc - use SIMPLE_DEV_PM_OPS
  Input: omap-keypad - remove set_col_gpio_val() and get_row_gpio_val()
  Input: omap-keypad - drop empty PM stubs
  Input: omap-keypad - remove adjusting of scan delay
  Input: gpio-keys - clean up device tree binding example
  Input: kbtab - stop saving struct usb_device
  Input: gtco - stop saving struct usb_device
  Input: aiptek - stop saving struct usb_device
  Input: acecad - stop saving struct usb_device

Pull media updates from Mauro Carvalho Chehab:
 - added support for Intersil/Techwell TW686x-based video capture cards
 - v4l PCI skeleton driver moved to samples directory
 - Documentation cleanups and improvements
 - RC: reduced the memory footprint for IR raw events
 - tpg: Export the tpg code from vivid as a module
 - adv7180: Add device tree binding documentation
 - lots of driver improvements and fixes

* tag 'media/v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (173 commits)
  [media] exynos-gsc: avoid build warning without CONFIG_OF
  [media] samples: v4l: from Documentation to samples directory
  [media] dib0700: add USB ID for another STK8096-PVR ref design based card
  [media] tvp5150: propagate I2C write error in .s_register callback
  [media] tvp5150: return I2C write operation failure to callers
  [media] em28xx: add support for Hauppauge WinTV-dualHD DVB tuner
  [media] em28xx: add missing USB IDs
  [media] update cx23885 and em28xx cardlists
  [media] media: au0828 fix au0828_v4l2_device_register() to not unlock and free
  [media] c8sectpfe: Rework firmware loading mechanism
  [media] c8sectpfe: Demote print to dev_dbg
  [media] c8sectpfe: Fix broken circular buffer wp management
  [media] media-device: Simplify compat32 logic
  [media] media: i2c: ths7303: remove redundant assignment on bt
  [media] dvb-usb: hide unused functions
  [media] xilinx-vipp: remove unnecessary of_node_put
  [media] drivers/media/media-devnode: clear private_data before put_device()
  [media] drivers/media/media-device: move debug log before _devnode_unregister()
  [media] drivers/media/rc: postpone kfree(rc_dev)
  [media] media/dvb-core: forward media_create_pad_links() return value
  ...

Pull SCSI updates from James Bottomley:
 "First round of SCSI updates for the 4.6+ merge window.

  This batch includes the usual quota of driver updates (bnx2fc, mp3sas,
  hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas).  There's
  also a multiqueue update for scsi_debug, assorted bug fixes and a few
  other minor updates (refactor of scsi_sg_pools into generic code, alua
  and VPD updates, and struct timeval conversions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
  mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs
  mpt3sas: Set maximum transfer length per IO to 4MB for VDs
  mpt3sas: Updating mpt3sas driver version to 13.100.00.00
  mpt3sas: Fix initial Reference tag field for 4K PI drives.
  mpt3sas: Handle active cable exception event
  mpt3sas: Update MPI header to 2.00.42
  Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy"
  eata_pio: missing break statement
  hpsa: Fix type ZBC conditional checks
  scsi_lib: Decode T10 vendor IDs
  scsi_dh_alua: do not fail for unknown VPD identification
  scsi_debug: use locally assigned naa
  scsi_debug: uuid for lu name
  scsi_debug: vpd and mode page work
  scsi_debug: add multiple queue support
  bfa: fix bfa_fcb_itnim_alloc() error handling
  megaraid_sas: Downgrade two success messages to info
  cxlflash: Fix to resolve dead-lock during EEH recovery
  scsi_debug: rework resp_report_luns
  scsi_debug: use pdt constants
  ...

Pull iscsi_ibft updates from Konrad Rzeszutek Wilk:
 "The pull has two features - both of them expand the SysFS entries:

   - 'prefix-len' - which is subnet_mask_prefix of the iBFT header.

   - 'acpi_header' dir with: 'iBFT', OEM-ID (whatever it extracts from
     the iBFT header) and OEM_TABLE_ID (also whatever it extracts from
     the iBFT header).  This is to help NIC drivers to figure out during
     bootup how to deal with BIOS created iBFT tables (like by TianoCore
     UEFI implemenation)"

* 'stable/for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  ibft: Expose iBFT acpi header via sysfs
  iscsi_ibft: Add prefix-len attr and display netmask

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons.

  For the most part, this is now related to power management
  controllers, which have not yet been abstracted into a separate
  subsystem, and typically require some code in drivers/soc or arch/arm
  to control the power domains.

  Another large chunk here is a rework of the NVIDIA Tegra USB3.0
  support, which was surprisingly tricky and took a long time to get
  done.

  Finally, reset controller handling as always gets merged through here
  as well"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits)
  arm-ccn: Enable building as module
  soc/tegra: pmc: Add generic PM domain support
  usb: xhci: tegra: Add Tegra210 support
  usb: xhci: Add NVIDIA Tegra XUSB controller driver
  dt-bindings: usb: xhci-tegra: Add Tegra210 XUSB controller support
  dt-bindings: usb: Add NVIDIA Tegra XUSB controller binding
  PCI: tegra: Support per-lane PHYs
  dt-bindings: pci: tegra: Update for per-lane PHYs
  phy: tegra: Add Tegra210 support
  phy: Add Tegra XUSB pad controller support
  dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support
  dt-bindings: phy: Add NVIDIA Tegra XUSB pad controller binding
  phy: core: Allow children node to be overridden
  clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs
  drivers: firmware: psci: make two helper functions inline
  soc: renesas: rcar-sysc: Add support for R-Car H3 power areas
  soc: renesas: rcar-sysc: Add support for R-Car E2 power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-N power areas
  soc: renesas: rcar-sysc: Add support for R-Car M2-W power areas
  soc: renesas: rcar-sysc: Add support for R-Car H2 power areas
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "As usual, a bunch of commits, mostly adding drivers and other options
  to defconfigs.

  We are adding three new defconfig files for the newly added 32-bit
  machines (aspeed and mps2), the rest is mainly housekeeping.

  The changes outside of arch/arm/config/ are for a Kconfig symbol that
  got renamed"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
  ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
  ARM: u8500_defconfig: update sensor config
  ARM: u8500_defconfig: remove staging from defconfig
  ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
  ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
  arm/configs: Add Aspeed defconfig
  arm/configs/multi_v5: Add Aspeed ast2400
  ARM: at91: sama5: Update defconfig
  ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
  ARM: multi_v7: Enable Tegra XUSB controller in defconfig
  ARM: tegra: Enable XUSB controller in defconfig
  ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
  ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
  ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
  ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
  ARM: multi_v7_defconfig: add Atmel watchdog timers
  ARM: multi_v7_defconfig: add HLCDC drivers as modules
  ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
  ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
  ...