Received from Mark Salyzyn:

The only real difference between the rkt and rx platform modules is the
offset of the message registers. This patch recognizes this similarity
and simplifies the driver to reduce it's code footprint and to improve
maintainability by reducing the code duplication.

Visibly, the 'rkt.c' portion of this patch looks more complicated than
it really is. View it as retaining the rkt-only specifics of the
interface.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

I am placing this functionality into an insmod parameter. Normally the physical
components are exported to sg, and are blocked from showing up in sd.

Note that the pass-through I/O path via the driver through the Firmware to the
physical disks is not an optimized path, the card is designed for Hardware
RAID, elevator sorting and caching. This should not be used as a means for
utilizing the aacraid based controllers as a generic scsi/SATA/SAS controller,
performance should suck by a few percentage points, any RAID meta-data on the
drives will confuse the controller about who owns the drives and there is a
high risk of destroying content in both directions. Unreliable and for
experimentation or strange controlled circumstances only.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Received from Mark Salyzyn:

Basically cleanup, nothing here will have an affect. Adjusting some
error codes, removing superfluous definitions and code fragments.
Signed-off-by: NMark Haverkamp <markh@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

As Andreas stated he will not maintain the zfcp driver anymore.
Instead I will take over the responsibility.
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Removed myself as maintainer of the s390 zfcp driver --
I will not maintain it any longer.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix the fix ... One of my previous fixes introduced removal of all fsf
requests in zfcp's eh_host_reset_handler. But this must not happen
before qdio queues are shut down. So, I revert the changes of
zfcp_scsi_eh_host_reset_handler.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This instance will be used whenever a timer is needed for
a request by zfcp.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

zfcp's eh_abort_handler used the wrong request ID to
identify the request to be aborted. The bug was introduced
with commit fea9d6c7
for improved management of request IDs. The bug is
fixed with this patch.
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Create private slab caches in order to guarantee proper alignment of
data structures that get passed to hardware.

Sidenote: with this patch slab cache debugging will finally work on s390
(at least no known problems left).

Furthermore this patch does some minor cleanups:
- store ptr for transport template in struct zfcp_data
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Compile fix ups and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove unused zfcp_ccw_unregister function (leftover from zfcp's
module_exit era).
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Some cards need to pause the sequencer before the SBLKCTL register is
touched.  This fixes a PCI related oops seen on powerpc macs with this
card caused by trying to ascertain the bus signalling before beginning
domain validation.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

For cards that don't support LVD, checking the SBLKCTL register to
determine the bus singalling doesn't work.  So, check that the card
supports LVD first (AHC_ULTRA2) before checking the register.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

See http://www.torque.net/sg/sdebug26.html for more
information on the scsi_debug driver.

ChangeLog:
  - add 'vpd_use_hostno' parameter to allow simulated hosts
    to see the same set of targets (and luns). For testing
    multipath software.
  - add 'fake_rw' parameter to ignore the data in READ and
    WRITE commands
  - add support for log subpages (new in SPC-4)
  - yield appropriate block descriptor for MODE SENSE
    commands (only for pdt=0 (i.e. disks))
  - REQUEST SENSE response no longer shows the stopped
    power condition (SAT changed to agree with SPC-3)
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Check copy_to_user() return value in drivers/scsi/megaraid.c::megadev_ioctl()
This gets rid of this little warning:
  drivers/scsi/megaraid.c:3661: warning: ignoring return value of 'copy_to_user', declared with attribute warn_unused_result
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Acked-by: N"Ju, Seokmann" <Seokmann.Ju@lsil.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix this driver not to use a static two element host array instead use
a list.  This should fix panic on multiple eject reinsert of the
pcmcia version of this device.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NMalahal Naineni <malahal@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch removes the reliance on FLASH Manufacture IDs for validation.
Signed-off-by: NAlexis Bruemmer <alexisb@us.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] statfs for cifs unix extensions no longer experimental
  [CIFS] New POSIX locking code not setting rc properly to zero on successful
  [CIFS] Support deep tree mounts (e.g. mounts to //server/share/path)

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] Rework AGPv3 modesetting fallback.
  [AGPGART] Add suspend callback for i965
  [AGPGART] Fix number of aperture sizes in 830 gart structs.
  [AGPGART] Intel 965 Express support.
  [AGPGART] agp.h: constify struct agp_bridge_data::version
  [AGPGART] const'ify VIA AGP PCI table.
  [AGPGART] CONFIG_PM=n slim: drivers/char/agp/intel-agp.c
  [AGPGART] CONFIG_PM=n slim: drivers/char/agp/efficeon-agp.c
  [AGPGART] Const'ify the agpgart driver version.
  [AGPGART] remove private page protection map

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] sw_any_bug_dmi_table can be used on resume, so it isn't initdata
  [CPUFREQ] Fix some more CPU hotplug locking.
  [CPUFREQ] Workaround for BIOS bug in software coordination of frequency
  [CPUFREQ] Longhaul - Add voltage scaling to driver
  [CPUFREQ] Fix sparse warning in ondemand
  [CPUFREQ] make drivers/cpufreq/cpufreq_ondemand.c:powersave_bias_target() static
  [CPUFREQ] Longhaul - Add ignore_latency option
  [CPUFREQ] Longhaul - Disable arbiter
  [CPUFREQ][2/2] ondemand: updated add powersave_bias tunable
  [CPUFREQ][1/2] ondemand: updated tune for hardware coordination
  [CPUFREQ] Fix typo.

missing le16_to_cpu()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In

|Author: James Simmons <jsimmons@kozmo.(none)>
|Date:   Thu Mar 13 22:37:08 2003 -0800
|
|    [FBCON] Cursor handling clean up. I nuked several static variables.

we have

-static void fbcon_vbl_handler(int irq, void *dummy, struct pt_regs *fp)
+static void fb_vbl_handler(int irq, void *dev_id, struct pt_regs *fp)

and 3 years later a couple of instances missed back then still remains
there.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

iommu_init() and iounit_init() are never called for sun4, but that's not
enough - these calls should be ifdefed out since the functions in question
simply do not exist for CONFIG_SUN4 kernel.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

memcpy() from iomem is a bad thing...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Back when pci_dev had base_address[], loop of form
	base = &...->base_address[0];
	for (.....) {
		...
		*base++ = addr;
	}
was fine, but when that array got spread in ->resource[...].start
replacing the initialization with
	base = &...->resource[0].start;
was not a sufficient modification.  IOW this code got broken for cases
when there had been more than one resource to fill.  All way back in
2.3.41-pre3...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

several targets have no ....at() family and m32r calls its only chown variant
chown32(), with __NR_chown being undefined.  creat(2) is also absent in some
targets.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sw_any_bug_dmi_table can be used on resume, so it isn't initdata.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Lukewarm IQ detected in hotplug locking
BUG: warning at kernel/cpu.c:38/lock_cpu_hotplug()
[<b0134a42>] lock_cpu_hotplug+0x42/0x65
[<b02f8af1>] cpufreq_update_policy+0x25/0xad
[<b0358756>] kprobe_flush_task+0x18/0x40
[<b0355aab>] schedule+0x63f/0x68b
[<b01377c2>] __link_module+0x0/0x1f
[<b0119e7d>] __cond_resched+0x16/0x34
[<b03560bf>] cond_resched+0x26/0x31
[<b0355b0e>] wait_for_completion+0x17/0xb1
[<f965c547>] cpufreq_stat_cpu_callback+0x13/0x20 [cpufreq_stats]
[<f9670074>] cpufreq_stats_init+0x74/0x8b [cpufreq_stats]
[<b0137872>] sys_init_module+0x91/0x174
[<b0102c81>] sysenter_past_esp+0x56/0x79

As there are other places that call cpufreq_update_policy without
the hotplug lock, it seems better to keep the hotplug locking
at the lower level for the time being until this is revamped.
Signed-off-by: NDave Jones <davej@redhat.com>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (65 commits)
  IB: Fix typo in kerneldoc for ib_set_client_data()
  IPoIB: Add some likely/unlikely annotations in hot path
  IPoIB: Remove unused include of vmalloc.h
  IPoIB: Rejoin all multicast groups after a port event
  IPoIB: Create MCGs with all attributes required by RFC
  IB/sa: fix ib_sa_selector names
  IB/iser: INFINIBAND_ISER depends on INET
  IB/mthca: Simplify calls to mthca_cq_clean()
  RDMA/cma: Document rdma_accept() error handling
  IB/mthca: Recover from catastrophic errors
  RDMA/cma: Document rdma_destroy_id() function
  IB/cm: Do not track remote QPN in timewait state
  IB/sa: Require SA registration
  IPoIB: Refactor completion handling
  IB/iser: Do not use FMR for a single dma entry sg
  IB/iser: fix some debug prints
  IB/iser: make FMR "page size" be 4K and not PAGE_SIZE
  IB/iser: Limit the max size of a scsi command
  IB/iser: fix a check of SG alignment for RDMA
  RDMA/cma: Protect against adding device during destruction
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [netdrvr] mv643xx_eth: fix obvious typo, which caused build breakage
  [netdrvr] lp486e: fix typo

Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NEli Cohen <eli@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

IPoIB doesn't use anything from <linux/vmalloc.h>, so don't include it.
Signed-off-by: NDotan Barak <dotanb@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

When ipoib_ib_dev_flush() is called because of a port event, the
driver needs to rejoin all multicast groups, since the flush will call
ipoib_mcast_dev_flush() (via ipoib_ib_dev_down()).  Otherwise no
(non-broadcast) multicast groups will be rejoined until the networking
core calls ->set_multicast_list again, and so multicast reception will
be broken for potentially a long time.
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

RFC 4391 ("Transmission of IP over InfiniBand (IPoIB)") says:

  If the IB multicast group does not already exist, one must be
  created first with the IPoIB link MTU.  The MGID MUST use the same
  P_Key, Q_Key, SL, MTU, and HopLimit as those used in the
  broadcast-GID.  The rest of attributes SHOULD follow the values used
  in the broadcast-GID as well.

However, the current IPoIB driver is only setting the attributes
required by the InfiniBand spec to create a multicast group, so in
particular the MTU and HopLimit are not being set.  Add these
attributes when creating MCGs, and also set the Rate attribute, since
IPoIB pays attention to that attribute as well.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Relevant SA queries are actually "greater than" / "less than", not
"greater than or equal" / "less than or equal" as the names imply.
(See IB spec 1.2 Vol 1, 15.2.5.16 PATHRECORD/Table 205 PathRecord)
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>