Doing things like hci_conn_hash_flush() while holding the hdev lock is
risky since its synchronous pending work cancellation could cause the
L2CAP layer to try to reacquire the hdev lock. Right now there doesn't
seem to be any obvious places where this would for certain happen but
it's already enough to cause lockdep to start warning against the hdev
and the work struct locks being taken in the "wrong" order:

[  +0.000373] mgmt-tester/1603 is trying to acquire lock:
[  +0.000292]  ((&conn->pending_rx_work)){+.+.+.}, at: [<c104266d>] flush_work+0x0/0x181
[  +0.000270]
but task is already holding lock:
[  +0.000000]  (&hdev->lock){+.+.+.}, at: [<c13b9a80>] hci_dev_do_close+0x166/0x359
[  +0.000000]
which lock already depends on the new lock.

[  +0.000000]
the existing dependency chain (in reverse order) is:
[  +0.000000]
-> #1 (&hdev->lock){+.+.+.}:
[  +0.000000]        [<c105ea8f>] lock_acquire+0xe3/0x156
[  +0.000000]        [<c140c663>] mutex_lock_nested+0x54/0x375
[  +0.000000]        [<c13d644b>] l2cap_recv_frame+0x293/0x1a9c
[  +0.000000]        [<c13d7ca4>] process_pending_rx+0x50/0x5e
[  +0.000000]        [<c1041a3f>] process_one_work+0x21c/0x436
[  +0.000000]        [<c1041e3d>] worker_thread+0x1be/0x251
[  +0.000000]        [<c1045a22>] kthread+0x94/0x99
[  +0.000000]        [<c140f801>] ret_from_kernel_thread+0x21/0x30
[  +0.000000]
-> #0 ((&conn->pending_rx_work)){+.+.+.}:
[  +0.000000]        [<c105e158>] __lock_acquire+0xa07/0xc89
[  +0.000000]        [<c105ea8f>] lock_acquire+0xe3/0x156
[  +0.000000]        [<c1042696>] flush_work+0x29/0x181
[  +0.000000]        [<c1042864>] __cancel_work_timer+0x76/0x8f
[  +0.000000]        [<c104288c>] cancel_work_sync+0xf/0x11
[  +0.000000]        [<c13d4c18>] l2cap_conn_del+0x72/0x183
[  +0.000000]        [<c13d8953>] l2cap_disconn_cfm+0x49/0x55
[  +0.000000]        [<c13be37a>] hci_conn_hash_flush+0x7a/0xc3
[  +0.000000]        [<c13b9af6>] hci_dev_do_close+0x1dc/0x359
[  +0.012038]        [<c13bbe38>] hci_unregister_dev+0x6e/0x1a3
[  +0.000000]        [<c12d33c1>] vhci_release+0x28/0x47
[  +0.000000]        [<c10dd6a9>] __fput+0xd6/0x154
[  +0.000000]        [<c10dd757>] ____fput+0xd/0xf
[  +0.000000]        [<c1044bb2>] task_work_run+0x6b/0x8d
[  +0.000000]        [<c1001bd2>] do_notify_resume+0x3c/0x3f
[  +0.000000]        [<c140fa70>] work_notifysig+0x29/0x31
[  +0.000000]
other info that might help us debug this:

[  +0.000000]  Possible unsafe locking scenario:

[  +0.000000]        CPU0                    CPU1
[  +0.000000]        ----                    ----
[  +0.000000]   lock(&hdev->lock);
[  +0.000000]                                lock((&conn->pending_rx_work));
[  +0.000000]                                lock(&hdev->lock);
[  +0.000000]   lock((&conn->pending_rx_work));
[  +0.000000]
 *** DEADLOCK ***

Fully fixing this would require some quite heavy refactoring to change
how the hdev lock and hci_conn instances are handled together. A simpler
solution for now which this patch takes is to try ensure that the hdev
workqueue is empty before proceeding with the various cleanup calls,
including hci_conn_hash_flush().
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The common short form of "randomizer" is "rand" in many places
(including the Bluetooth specification). The shorter version also makes
for easier to read code with less forced line breaks. This patch renames
all occurences of "randomizer" to "rand" in the Bluetooth subsystem
code.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

For now the mgmt commands dealing with remote OOB data are strictly
BR/EDR-only. This patch fixes missing checks for the passed address type
so that any non-BR/EDR value triggers the appropriate error response.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch changes the byteorder handling for short and panid handling.
We now except to get little endian in nl802154 for these attributes.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch moves the 802.15.4 constraints WPAN_NUM_ defines into
"net/ieee802154.h" which should contain all necessary 802.15.4 related
information. Also rename these defines to a common name which is
IEEE802154_MAX_CHANNEL and IEEE802154_MAX_PAGE.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for deleting a wpan interface via nl802154.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for setting an extended address while
registration a new interface. If ieee802154_is_valid_extended_addr
getting as parameter and invalid extended address then the perm address
is fallback. This is useful to make some default handling while for
example default registration of a wpan interface while phy registration.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a new nl802154 command for adding a new interface
according to a wpan phy via nl802154.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This parameter was grabbed from wireless implementation with the
identically wireless dev struct. We don't need this right now and so we
remove it. Maybe we will add it later again if we found any real reason
to have such parameter.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replace the depracted IEEE802154_DEV to the new introduced
NL802154_IFTYPE_NODE types. There is a backwards compatibility to have
the identical types for both enum definitions. Also remove some inlcude
issue with "linux/nl802154.h", because the export nl_policy inside this
header it was always necessary to have an include of "net/rtnetlink.h"
before. The reason for this is more complicated. Nevertheless we removed
this now, because "linux/nl802154.h" is the depracted netlink interface.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

We don't and we can't name it zigbee anymore. This patch removes
deprecated information for project website.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patches removes the const keyword in variables which are non
pointers. There is no sense to declare call by value parameters as
const.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patches removes the const keyword in variables which are non
pointers. There is no sense to declare call by value parameters as
const.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patches removes the const keyword in variables which are non
pointers. There is no sense to declare call by value parameters as const.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch fix an copy&paste issue in the comment of setting symbol
duration. These comments are more correct according the at86rf212 datasheet
now.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes some prototypes which are not used anymore.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When passed BDADDR_ANY the Remove Remote OOB Data comand is specified to
clear all entries. This patch adds the necessary check and calls
hci_remote_oob_data_clear() when necessary.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds some extra debug logs to L2CAP related code. These are
mainly to help track locking issues but will probably be useful for
debugging other types of issues as well.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Now that the SMP related key lists are converted to RCU there is nothing
in smp_cmd_sign_info() or smp_cmd_ident_addr_info() that would require
taking the hdev lock (including the smp_distribute_keys call). This
patch removes this unnecessary locking.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch set converts the hdev->identity_resolving_keys list to use
RCU to eliminate the need to use hci_dev_lock/unlock.

An additional change that must be done is to remove use of
CRYPTO_ALG_ASYNC for the hdev-specific AES crypto context. The reason is
that this context is used for matching RPAs and the loop that does the
matching is under the RCU read lock, i.e. is an atomic section which
cannot sleep.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch set converts the hdev->long_term_keys list to use RCU to
eliminate the need to use hci_dev_lock/unlock.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The insufficient authentication/encryption errors indicate to the L2CAP
client that it should try to elevate the security level. Since there
really isn't any exception to this rule it makes sense to fully handle
it on the kernel side instead of pushing the responsibility to user
space.

This patch adds special handling of these two error codes and calls
smp_conn_security() with the elevated security level if necessary.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

So far smp_sufficient_security() has returned false if we're encrypted
with an STK but do have an LTK available. However, for the sake of LE
CoC servers we do want to let the incoming connection through even
though we're only encrypted with the STK.

This patch adds a key preference parameter to smp_sufficient_security()
with two possible values (enum used instead of bool for readability).
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

For LE CoC L2CAP servers we don't do security level elevation during the
BT_CONNECT2 state (instead LE CoC simply sends an immediate error
response if the security level isn't high enough). Therefore if we get a
security level change while an LE CoC channel is in the BT_CONNECT2
state we should simply do nothing.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

use memdup_user for rd_data import.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Server channels in BT_LISTEN state should use L2CAP_NESTING_PARENT. This
patch fixes the nesting value for the 6lowpan channel.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There's no reason why all users of L2CAP would need to worry about
initializing chan->nesting to L2CAP_NESTING_NORMAL (which is important
since 0 is the same as NESTING_SMP). This patch moves the initialization
to the common place that's used to create all new channels, i.e. the
l2cap_chan_create() function.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The teardown callback for L2CAP channels is problematic in that it is
explicitly called for all types of channels from l2cap_chan_del(),
meaning it's not possible to hard-code a nesting level when taking the
socket lock. The simplest way to have a correct nesting level for the
socket locking is to use the same value as for the chan. This also means
that the other places trying to lock parent sockets need to be update to
use the chan value (since L2CAP_NESTING_PARENT is defined as 2 whereas
SINGLE_DEPTH_NESTING has the value 1).
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

By default lockdep considers all L2CAP channels equal. This would mean
that we get warnings if a channel is locked when another one's lock is
tried to be acquired in the same thread. This kind of inter-channel
locking dependencies exist in the form of parent-child channels as well
as any channel wishing to elevate the security by requesting procedures
on the SMP channel.

To eliminate the chance for these lockdep warnings we introduce a
nesting level for each channel and use that when acquiring the channel
lock. For now there exists the earlier mentioned three identified
categories: SMP, "normal" channels and parent channels (i.e. those in
BT_LISTEN state). The nesting level is defined as atomic_t since we need
access to it before the lock is actually acquired.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the interframe spacing time workaround from at86rf230
driver and use the mac802154 one. The interframe spacing time differs at
at86rf212 and channel setting. This patch fix this handling which is also
a new workaround and should be moved into mac802154 while channel
setting.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a new interframe spacing time handling into mac802154
layer. Interframe spacing time is a time period between each transmit.
This patch adds a high resolution timer into mac802154 and starts on
xmit complete with corresponding interframe spacing expire time if
ifs_handling is true. We make it variable because it depends if
interframe spacing time is handled by transceiver or mac802154. At the
timer complete function we wake the netdev queue again. This avoids
new frame transmit in range of interframe spacing time.

For synced driver we add no handling of interframe spacing time. This
is currently a lack of support in all synced xmit drivers. I suppose
it's working because the latency of workqueue which is needed to call
spi_sync.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The mgmt_user_passkey_request and related functions do not do anything
else except read access to hdev->id. This member never changes after the
hdev creation so there is no need to acquire a lock to read it.
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Any code calling bt_accept_dequeue() to get a new child socket from a
server socket should use lock_sock_nested to avoid lockdep warnings due
to the parent and child sockets being locked at the same time. The
l2cap_sock_accept() function is already doing this correctly but a
second place calling bt_accept_dequeue() is the code path from
l2cap_sock_teardown_cb() that calls l2cap_sock_cleanup_listen().

This patch fixes the proper nested locking annotation and thereby avoids
the following style of lockdep warning.

[  +0.000224] [ INFO: possible recursive locking detected ]
[  +0.000222] 3.17.0+ #1153 Not tainted
[  +0.000130] ---------------------------------------------
[  +0.000227] l2cap-tester/562 is trying to acquire lock:
[  +0.000210]  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<c1393f47>] bt_accept_dequeue+0x68/0x11b
[  +0.000467]
but task is already holding lock:
[  +0.000186]  (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<c13b949a>] lock_sock+0xa/0xc
[  +0.000421]
other info that might help us debug this:
[  +0.000199]  Possible unsafe locking scenario:

[  +0.000117]        CPU0
[  +0.000000]        ----
[  +0.000000]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
[  +0.000000]   lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP);
[  +0.000000]
 *** DEADLOCK ***
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for setting listen before transmit mode via
nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the invalid max frame retries check from driver
layer. This is already handled by nl802154 framework. Also the IEEE
802.15.4 standard doesn't allow a frame retries setting above 7. This
seems to be valid for the at86rf230 transceiver but the chip running out
of spec then. We only allow settings according 802.15.4 right now.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch add support for setting mac frame retries setting via
nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the invalid check on max csma backoffs in driver
layer. This is already handled by nl802154 framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch add support for max csma backoffs setting via nl802154
framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch removes the invalid backoff exponent check from driver layer.
This is already handled by nl802154.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds support for setting backoff exponents via nl802154
framework.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>