KSM reference counts can cause an anon_vma to exist after the processe it
belongs to have already exited.  Because the anon_vma lock now lives in
the root anon_vma, we need to ensure that the root anon_vma stays around
until after all the "child" anon_vmas have been freed.

The obvious way to do this is to have a "child" anon_vma take a reference
to the root in anon_vma_fork.  When the anon_vma is freed at munmap or
process exit, we drop the refcount in anon_vma_unlink and possibly free
the root anon_vma.

The KSM anon_vma reference count function also needs to be modified to
deal with the possibility of freeing 2 levels of anon_vma.  The easiest
way to do this is to break out the KSM magic and make it generic.

When compiling without CONFIG_KSM, this code is compiled out.
Signed-off-by: NRik van Riel <riel@redhat.com>
Tested-by: NLarry Woodman <lwoodman@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Tested-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Always (and only) lock the root (oldest) anon_vma whenever we do something
in an anon_vma.  The recently introduced anon_vma scalability is due to
the rmap code scanning only the VMAs that need to be scanned.  Many common
operations still took the anon_vma lock on the root anon_vma, so always
taking that lock is not expected to introduce any scalability issues.

However, always taking the same lock does mean we only need to take one
lock, which means rmap_walk on pages from any anon_vma in the vma is
excluded from occurring during an munmap, expand_stack or other operation
that needs to exclude rmap_walk and similar functions.

Also add the proper locking to vma_adjust.
Signed-off-by: NRik van Riel <riel@redhat.com>
Tested-by: NLarry Woodman <lwoodman@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Track the root (oldest) anon_vma in each anon_vma tree.  Because we only
take the lock on the root anon_vma, we cannot use the lock on higher-up
anon_vmas to lock anything.  This makes it impossible to do an indirect
lookup of the root anon_vma, since the data structures could go away from
under us.

However, a direct pointer is safe because the root anon_vma is always the
last one that gets freed on munmap or exit, by virtue of the same_vma list
order and unlink_anon_vmas walking the list forward.

[akpm@linux-foundation.org: fix typo]
Signed-off-by: NRik van Riel <riel@redhat.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: NLarry Woodman <lwoodman@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Subsitute a direct call of spin_lock(anon_vma->lock) with an inline
function doing exactly the same.

This makes it easier to do the substitution to the root anon_vma lock in a
following patch.

We will deal with the handful of special locks (nested, dec_and_lock, etc)
separately.
Signed-off-by: NRik van Riel <riel@redhat.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: NLarry Woodman <lwoodman@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename anon_vma_lock to vma_lock_anon_vma.  This matches the naming style
used in page_lock_anon_vma and will come in really handy further down in
this patch series.
Signed-off-by: NRik van Riel <riel@redhat.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: NLarry Woodman <lwoodman@redhat.com>
Acked-by: NLarry Woodman <lwoodman@redhat.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse"
list[1] ("Follow common convention and you'll get it wrong"), except in
some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3].

kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes
takes a pointer to within the page itself.  This seems to once in a while
trip people up (the convention they are following is the one from
kunmap()).

Make it much harder to misuse, by moving it to level 9 on Rusty's list[4]
("The compiler/linker won't let you get it wrong").  This is done by
refusing to build if the type of its first argument is a pointer to a
struct page.

The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck()
(which is what you would call in case for some strange reason calling it
with a pointer to a struct page is not incorrect in your code).

The previous version of this patch was compile tested on x86-64.

[1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
[2] In these cases, it is at level 5, "Do it right or it will always
    break at runtime."
[3] At least mips and powerpc look very similar, and sparc also seems to
    share a common ancestor with both; there seems to be quite some
    degree of copy-and-paste coding here. The include/asm/highmem.h file
    for these three archs mention x86 CPUs at its top.
[4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html
[5] As an aside, could someone tell me why mn10300 uses unsigned long as
    the first parameter of kunmap_atomic() instead of void *?
Signed-off-by: NCesar Eduardo Barros <cesarb@cesarb.net>
Cc: Russell King <linux@arm.linux.org.uk> (arch/arm)
Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips)
Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300)
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300)
Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc)
Cc: Helge Deller <deller@gmx.de> (arch/parisc)
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc)
Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc)
Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc)
Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86)
Cc: Ingo Molnar <mingo@redhat.com> (arch/x86)
Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86)
Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic)
Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list)
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a copy-on-write occurs, we take one of two paths in handle_mm_fault:
through handle_pte_fault for normal pages, or through hugetlb_fault for
huge pages.

In the normal page case, we eventually get to do_wp_page and call mmu
notifiers via ptep_clear_flush_notify.  There is no callout to the mmmu
notifiers in the huge page case.  This patch fixes that.
Signed-off-by: NDoug Doan <dougd@cray.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide an INIT_MM_CONTEXT intializer macro which can be used to
statically initialize mm_struct:mm_context of init_mm.  This way we can
get rid of code which will do the initialization at run time (on s390).

In addition the current code can be found at a place where it is not
expected.  So let's have a common initializer which architectures
can use if needed.

This is based on a patch from Suzuki Poulose.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Suzuki Poulose <suzuki@in.ibm.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)).  The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T x;
identifier f;
@@

T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
 ...+> }

@@
expression x;
@@

- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use memdup_user when user data is immediately copied into the
allocated region.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The start/stop_critical_timing functions for preemptirqsoff, preemptoff
and irqsoff tracers contain atomic_inc() and atomic_dec() operations.

Atomic operations use local_irq_save/restore macros to ensure atomic
access but they are traced by the same function which is causing recursion
problem.

The reason is when these tracers are turn ON then the
local_irq_save/restore macros are changed in include/linux/irqflags.h to
call trace_hardirqs_on/off which call start/stop_critical_timing.

Microblaze was affected because it uses generic atomic implementation.
Signed-off-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a build failure "error: void value not ignored as it ought to be"
by removing an assignment of a void return value.  The functionality of
the code is not changed.
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Acked-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After the commit that changed ipmi_si detecting sequence from SMBIOS/ACPI
to ACPI/SMBIOS,

| commit 754d4531
| Author: Matthew Garrett <mjg@redhat.com>
| Date:   Wed May 26 14:43:47 2010 -0700
|
|    ipmi: change device discovery order
|
|    The ipmi spec provides an ordering for si discovery.  Change the driver to
|    match, with the exception of preferring smbios to SPMI as HPs (at least)
|    contain accurate information in the former but not the latter.

ipmi_si can not be initialized.

[  138.799739] calling  init_ipmi_devintf+0x0/0x109 @ 1
[  138.805050] ipmi device interface
[  138.818131] initcall init_ipmi_devintf+0x0/0x109 returned 0 after 12797 usecs
[  138.822998] calling  init_ipmi_si+0x0/0xa90 @ 1
[  138.840276] IPMI System Interface driver.
[  138.846137] ipmi_si: probing via ACPI
[  138.849225] ipmi_si 00:09: [io  0x0ca2] regsize 1 spacing 1 irq 0
[  138.864438] ipmi_si: Adding ACPI-specified kcs state machine
[  138.870893] ipmi_si: probing via SMBIOS
[  138.880945] ipmi_si: Adding SMBIOS-specified kcs state machineipmi_si: duplicate interface
[  138.896511] ipmi_si: probing via SPMI
[  138.899861] ipmi_si: Adding SPMI-specified kcs state machineipmi_si: duplicate interface
[  138.917095] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[  138.928658] ipmi_si: Interface detection failed
[  138.953411] initcall init_ipmi_si+0x0/0xa90 returned 0 after 110847 usecs

in smbios has
DMI/SMBIOS
Handle 0x00C5, DMI type 38, 18 bytes
IPMI Device Information
        Interface Type: KCS (Keyboard Control Style)
        Specification Version: 2.0
        I2C Slave Address: 0x00
        NV Storage Device: Not Present
        Base Address: 0x0000000000000CA2 (I/O)
        Register Spacing: 32-bit Boundaries
in DSDT has
                    Device (BMC)
                    {

                        Name (_HID, EisaId ("IPI0001"))
                        Method (_STA, 0, NotSerialized)
                        {
                            If (LEqual (OSN, Zero))
                            {
                                Return (Zero)
                            }

                            Return (0x0F)
                        }

                        Name (_STR, Unicode ("IPMI_KCS"))
                        Name (_UID, Zero)
                        Name (_CRS, ResourceTemplate ()
                        {
                            IO (Decode16,
                                0x0CA2,             // Range Minimum
                                0x0CA2,             // Range Maximum
                                0x00,               // Alignment
                                0x01,               // Length
                                )
                            IO (Decode16,
                                0x0CA6,             // Range Minimum
                                0x0CA6,             // Range Maximum
                                0x00,               // Alignment
                                0x01,               // Length
                                )
                        })
                        Method (_IFT, 0, NotSerialized)
                        {
                            Return (One)
                        }

                        Method (_SRV, 0, NotSerialized)
                        {
                            Return (0x0200)
                        }
                    }

so the reg spacing should be 4 instead of 1.

Try to calculate regspacing for this kind of system.

Observed on a Sun Fire X4800.  Other OSes work and pass certification.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NMatthew Garrett <mjg@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Myron Stowe <myron.stowe@hp.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  drm: fix fallouts from slow-work -> wq conversion
  workqueue: workqueue_cpu_callback() should be cpu_notifier instead of hotcpu_notifier
  workqueue: add missing __percpu markup in kernel/workqueue.c

Commit 991ea75c (drm: use workqueue instead of slow-work), which made
drm to use wq instead of slow-work, didn't account for the return
value difference between delayed_slow_work_enqueue() and
queue_delayed_work().  The former returns 0 on success and -errno on
failures while the latter never fails and only uses the return value
to indicate whether the work was already pending or not.

This misconversion triggered spurious error messages.  Remove the now
unnecessary return value check and error message.

Markus: caught another incorrect conversion in drm_kms_helper_poll_enable()
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org

Commit 6ee0578b (workqueue: mark init_workqueues as early_initcall)
made workqueue SMP initialization depend on workqueue_cpu_callback(),
which however was registered as hotcpu_notifier() and didn't get
called if CONFIG_HOTPLUG_CPU is not set.  This made gcwqs on non-boot
CPUs not create their initial workers leading to boot failures.  Fix
it by making it a cpu_notifier.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-and-bisected-by: Nwalt <w41ter@gmail.com>
Tested-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: check kmalloc() result
  arch/tile: catch up on various minor cleanups.
  arch/tile: avoid erroneous error return for PTRACE_POKEUSR.
  tile: set ARCH_KMALLOC_MINALIGN
  tile: remove homegrown L1_CACHE_ALIGN macro
  arch/tile: Miscellaneous cleanup changes.
  arch/tile: Split the icache flush code off to a generic <arch> header.
  arch/tile: Fix bug in support for atomic64_xx() ops.
  arch/tile: Shrink the tile-opcode files considerably.
  arch/tile: Add driver to enable access to the user dynamic network.
  arch/tile: Enable more sophisticated IRQ model for 32-bit chips.
  Move list types from <linux/list.h> to <linux/types.h>.
  Add wait4() back to the set of <asm-generic/unistd.h> syscalls.
  Revert adding some arch-specific signal syscalls to <linux/syscalls.h>.
  arch/tile: Do not use GFP_KERNEL for dma_alloc_coherent(). Feedback from fujita.tomonori@lab.ntt.co.jp.
  arch/tile: core support for Tilera 32-bit chips.
  Fix up the "generic" unistd.h ABI to be more useful.

* 'for-linus' of git://www.jni.nu/cris: (51 commits)
  CRIS: Fix alignment problem for older ld
  CRIS: Always dump registers for segfaulting process.
  CRIS: Add config for pausing a seg-faulting process
  CRIS: Don't take faults while in_atomic
  CRIS: Fixup lookup for delay slot faults
  CRIS: Discard exit.text and .data at runtime
  CRIS: Add cache aligned and read mostly data sections
  CRIS: Return something from profile write
  CRIS: Add ARTPEC-3 and timestamps for sync-serial
  CRIS: Better ARTPEC-3 support for gpio
  CRIS: Add include guard
  CRIS: Better handling of pinmux settings
  CRIS: New DMA defines for ARTPEC-3
  CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil
  CRIS: Pagetable for ARTPEC-3
  CRIS: Machine dependent memmap.h
  CRIS: Check if pointer is set before using it
  CRIS: Machine dependent dma.h
  CRIS: Define __read_mostly for CRISv32
  CRIS: Discard .note.gnu.build-id section
  ...

* 'for-linus' of git://android.kernel.org/kernel/tegra:
  [ARM] tegra: add MAINTAINERS entry
  [ARM] tegra: harmony: Add harmony board file
  [ARM] tegra: add pinmux support
  [ARM] tegra: add GPIO support
  [ARM] tegra: Add timer support
  [ARM] tegra: SMP support
  [ARM] tegra: Add clock support
  [ARM] tegra: Add IRQ support
  [ARM] tegra: initial tegra support

* 'for-linus' of git://github.com/schandinat/linux-2.6:
  drivers/video/via/via-gpio.c: fix warning
  viafb: Depends on X86
  fbdev: section cleanup in viafb driver
  viafb: fix accel_flags check_var bug
  viafb: probe cleanups
  viafb: remove ioctls which break the framebuffer interface
  viafb: update fix before calculating depth
  viafb: PLL value cleanup
  viafb: simplify lcd size "detection"
  viafb: fix PCI table
  viafb: add lcd scaling support for some IGPs
  viafb: improve lcd code readability
  viafb: remove duplicated scaling code
  MAINTAINERS: update viafb entry

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits)
  OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC
  OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store()
  OMAP: DSS2: Fix error path in omap_dsi_update()
  OMAP: DSS2: TDO35S: fix video signaling
  OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes
  OMAP: DSS2: OMAPFB: Fix probe error path
  OMAP3EVM: Replace vdvi regulator supply with vdds_dsi
  OMAP: DSS2: Remove extra return statement
  OMAP: DSS2: adjust YUV overlay width to be even
  OMAP: DSS2: OMAPFB: Fix sysfs mirror input check
  OMAP: DSS2: OMAPFB: Remove redundant color register range check
  OMAP: DSS2: OMAPFB: Remove redundant rotate range check
  OMAP: DSS2: OMAPFB: Check fb2display() return value
  OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged
  OMAP: DSS2: DSI: detect unsupported update requests
  OMAP: DSS2: DSI: increase FIFO low threshold
  OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO
  OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size
  OMAP: DSS2: change manual update scaling setup
  OMAP: DSS2: DSI: use BTA to end the frame transfer
  ...

Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits)
  omap: mailbox: reorganize headers
  omap: mailbox: standarize on 'omap-mailbox'
  omap: mailbox: only compile for configured archs
  omap: mailbox: simplify omap_mbox_register()
  omap: mailbox: reorganize registering
  omap: mailbox: add IRQ names
  omap: mailbox: remove unecessary fields
  omap: mailbox: don't export unecessary symbols
  omap: mailbox: update omap1 probing
  omap: mailbox: use correct config for omap1
  omap: mailbox: 2420 should be detected at run-time
  omap: mailbox: reorganize structures
  omap: mailbox: trivial cleanups
  omap mailbox: Set a device in logical mbox instance for traceability
  omap: mailbox: convert block api to kfifo
  omap: mailbox: remove (un)likely macros from cold paths
  omap: mailbox cleanup: split MODULE_AUTHOR line
  omap: mailbox: convert rwlocks to spinlock
  Mailbox: disable mailbox interrupt when request queue
  Mailbox: new mutext lock for h/w mailbox configuration
  ...

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  davinci: dm646x EVM: Specify reserved EDMA channel/slots
  davinci: da8xx/omapl EVM: Specify reserved channels/slots
  davinci: support for EDMA resource sharing
  davinci: edma: provide ability to detect insufficient CC info data
  davinci: da8xx: sparse cleanup: remove duplicate entries in irq priorities
  davinci: DM365: fixed second serial port
  Davinci: tnetv107x evm board initial support
  Davinci: tnetv107x initial gpio support
  Davinci: tnetv107x soc support
  Davinci: tnetv107x decompresser uart definitions
  Davinci: generalized debug macros

works in schecule_on_each_cpu() is a percpu pointer but was missing
__percpu markup.  Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (82 commits)
  firewire: core: add forgotten dummy driver methods, remove unused ones
  firewire: add isochronous multichannel reception
  firewire: core: small clarifications in core-cdev
  firewire: core: remove unused code
  firewire: ohci: release channel in error path
  firewire: ohci: use memory barriers to order descriptor updates
  tools/firewire: nosy-dump: increment program version
  tools/firewire: nosy-dump: remove unused code
  tools/firewire: nosy-dump: use linux/firewire-constants.h
  tools/firewire: nosy-dump: break up a deeply nested function
  tools/firewire: nosy-dump: make some symbols static or const
  tools/firewire: nosy-dump: change to kernel coding style
  tools/firewire: nosy-dump: work around segfault in decode_fcp
  tools/firewire: nosy-dump: fix it on x86-64
  tools/firewire: add userspace front-end of nosy
  firewire: nosy: note ioctls in ioctl-number.txt
  firewire: nosy: use generic printk macros
  firewire: nosy: endianess fixes and annotations
  firewire: nosy: annotate __user pointers and __iomem pointers
  firewire: nosy: fix device shutdown with active client
  ...

* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI / ACPICA: Simplify acpi_ev_initialize_gpe_block()
  ACPI / ACPICA: Fail acpi_gpe_wakeup() if ACPI_GPE_CAN_WAKE is unset
  ACPI / ACPICA: Do not execute _PRW methods during initialization
  ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags()
  ACPICA: Update version to 20100702
  ACPICA: Fix for Alias references within Package objects
  ACPICA: Fix lint warning for 64-bit constant
  ACPICA: Remove obsolete GPE function
  ACPICA: Update debug output components
  ACPICA: Add support for WDDT - Watchdog Descriptor Table
  ACPICA: Drop acpi_set_gpe
  ACPICA: Use low-level GPE enable during GPE block initialization
  ACPI / EC: Do not use acpi_set_gpe
  ACPI / EC: Drop suspend and resume routines
  ACPICA: Remove wakeup GPE reference counting which is not used
  ACPICA: Introduce acpi_gpe_wakeup()
  ACPICA: Rename acpi_hw_gpe_register_bit
  ACPICA: Update version to 20100528
  ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT
  ACPICA: Optimization: Reduce the number of namespace walks
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits)
  IB/qib: Add missing <linux/slab.h> include
  IB/ehca: Drop unnecessary NULL test
  RDMA/nes: Fix confusing if statement indentation
  IB/ehca: Init irq tasklet before irq can happen
  RDMA/nes: Fix misindented code
  RDMA/nes: Fix showing wqm_quanta
  RDMA/nes: Get rid of "set but not used" variables
  RDMA/nes: Read firmware version from correct place
  IB/srp: Export req_lim via sysfs
  IB/srp: Make receive buffer handling more robust
  IB/srp: Use print_hex_dump()
  IB: Rename RAW_ETY to RAW_ETHERTYPE
  RDMA/nes: Fix two sparse warnings
  RDMA/cxgb3: Make needlessly global iwch_l2t_send() static
  IB/iser: Make needlessly global iser_alloc_rx_descriptors() static
  RDMA/cxgb4: Add timeouts when waiting for FW responses
  IB/qib: Fix race between qib_error_qp() and receive packet processing
  IB/qib: Limit the number of packets processed per interrupt
  IB/qib: Allow writes to the diag_counters to be able to clear them
  IB/qib: Set cfgctxts to number of CPUs by default
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (214 commits)
  ALSA: hda - Add pin-fix for HP dc5750
  ALSA: als4000: Fix potentially invalid DMA mode setup
  ALSA: als4000: enable burst mode
  ALSA: hda - Fix initial capsrc selection in patch_alc269()
  ASoC: TWL4030: Capture route runtime DAPM ordering fix
  ALSA: hda - Add PC-beep whitelist for an Intel board
  ALSA: hda - More relax for pending period handling
  ALSA: hda - Define AC_FMT_* constants
  ALSA: hda - Fix beep frequency on IDT 92HD73xx and 92HD71Bxx codecs
  ALSA: hda - Add support for HDMI HBR passthrough
  ALSA: hda - Set Stream Type in Stream Format according to AES0
  ALSA: hda - Fix Thinkpad X300 so SPDIF is not exposed
  ALSA: hda - FIX to not expose SPDIF on Thinkpad X301, since it does not have the ability to use SPDIF
  ASoC: wm9081: fix resource reclaim in wm9081_register error path
  ASoC: wm8978: fix a memory leak if a wm8978_register fail
  ASoC: wm8974: fix a memory leak if another WM8974 is registered
  ASoC: wm8961: fix resource reclaim in wm8961_register error path
  ASoC: wm8955: fix resource reclaim in wm8955_register error path
  ASoC: wm8940: fix a memory leak if wm8940_register return error
  ASoC: wm8904: fix resource reclaim in wm8904_register error path
  ...

* 'bkl/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  do_coredump: Do not take BKL
  init: Remove the BKL from startup code

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELINUX: Fix build error.

* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: (34 commits)
  nfsd4: fix file open accounting for RDWR opens
  nfsd: don't allow setting maxblksize after svc created
  nfsd: initialize nfsd versions before creating svc
  net: sunrpc: removed duplicated #include
  nfsd41: Fix a crash when a callback is retried
  nfsd: fix startup/shutdown order bug
  nfsd: minor nfsd read api cleanup
  gcc-4.6: nfsd: fix initialized but not read warnings
  nfsd4: share file descriptors between stateid's
  nfsd4: fix openmode checking on IO using lock stateid
  nfsd4: miscellaneous process_open2 cleanup
  nfsd4: don't pretend to support write delegations
  nfsd: bypass readahead cache when have struct file
  nfsd: minor nfsd_svc() cleanup
  nfsd: move more into nfsd_startup()
  nfsd: just keep single lockd reference for nfsd
  nfsd: clean up nfsd_create_serv error handling
  nfsd: fix error handling in __write_ports_addxprt
  nfsd: fix error handling when starting nfsd with rpcbind down
  nfsd4: fix v4 state shutdown error paths
  ...

Fix the module init error handling.  There are a bunch of goto labels for
aborting the init procedure at different points and just undoing what needs
undoing - they aren't all in the right places, however.

This can lead to an oops like the following:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
	IP: [<ffffffff81042a31>] destroy_workqueue+0x17/0xc0
	...
	Modules linked in: kafs(+) dns_resolver rxkad af_rxrpc fscache

	Pid: 2171, comm: insmod Not tainted 2.6.35-cachefs+ #319 DG965RY/
	...
	Process insmod (pid: 2171, threadinfo ffff88003ca6a000, task ffff88003dcc3050)
	...
	Call Trace:
	 [<ffffffffa0055994>] afs_callback_update_kill+0x10/0x12 [kafs]
	 [<ffffffffa007d1c5>] afs_init+0x190/0x1ce [kafs]
	 [<ffffffffa007d035>] ? afs_init+0x0/0x1ce [kafs]
	 [<ffffffff810001ef>] do_one_initcall+0x59/0x14e
	 [<ffffffff8105f7ee>] sys_init_module+0x9c/0x1de
	 [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'nfs-for-2.6.36' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (42 commits)
  NFS: NFSv4.1 is no longer a "developer only" feature
  NFS: NFS_V4 is no longer an EXPERIMENTAL feature
  NFS: Fix /proc/mount for legacy binary interface
  NFS: Fix the locking in nfs4_callback_getattr
  SUNRPC: Defer deleting the security context until gss_do_free_ctx()
  SUNRPC: prevent task_cleanup running on freed xprt
  SUNRPC: Reduce asynchronous RPC task stack usage
  SUNRPC: Move the bound cred to struct rpc_rqst
  SUNRPC: Clean up of rpc_bindcred()
  SUNRPC: Move remaining RPC client related task initialisation into clnt.c
  SUNRPC: Ensure that rpc_exit() always wakes up a sleeping task
  SUNRPC: Make the credential cache hashtable size configurable
  SUNRPC: Store the hashtable size in struct rpc_cred_cache
  NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
  NFS: Fix the NFS users of rpc_restart_call()
  SUNRPC: The function rpc_restart_call() should return success/failure
  NFSv4: Get rid of the bogus RPC_ASSASSINATED(task) checks
  NFSv4: Clean up the process of renewing the NFSv4 lease
  NFSv4.1: Handle NFS4ERR_DELAY on SEQUENCE correctly
  NFS: nfs_rename() should not have to flush out writebacks
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add retrieve request
  fuse: add store request
  fuse: don't use atomic kmap

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (45 commits)
  nilfs2: reject filesystem with unsupported block size
  nilfs2: avoid rec_len overflow with 64KB block size
  nilfs2: simplify nilfs_get_page function
  nilfs2: reject incompatible filesystem
  nilfs2: add feature set fields to super block
  nilfs2: clarify byte offset in super block format
  nilfs2: apply read-ahead for nilfs_btree_lookup_contig
  nilfs2: introduce check flag to btree node buffer
  nilfs2: add btree get block function with readahead option
  nilfs2: add read ahead mode to nilfs_btnode_submit_block
  nilfs2: fix buffer head leak in nilfs_btnode_submit_block
  nilfs2: eliminate inline keywords in btree implementation
  nilfs2: get maximum number of child nodes from bmap object
  nilfs2: reduce repetitive calculation of max number of child nodes
  nilfs2: optimize calculation of min/max number of btree node children
  nilfs2: remove redundant pointer checks in bmap lookup functions
  nilfs2: get rid of nilfs_bmap_union
  nilfs2: unify bmap set_target_v operations
  nilfs2: get rid of nilfs_btree uses
  nilfs2: get rid of nilfs_direct uses
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: Adding error check after calling ext4_mb_regular_allocator()
  ext4: Fix dirtying of journalled buffers in data=journal mode
  ext4: re-inline ext4_rec_len_(to|from)_disk functions
  jbd2: Remove t_handle_lock from start_this_handle()
  jbd2: Change j_state_lock to be a rwlock_t
  jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
  ext4: Add mount options in superblock
  ext4: force block allocation on quota_off
  ext4: fix freeze deadlock under IO
  ext4: drop inode from orphan list if ext4_delete_inode() fails
  ext4: check to make make sure bd_dev is set before dereferencing it
  jbd2: Make barrier messages less scary
  ext4: don't print scary messages for allocation failures post-abort
  ext4: fix EFBIG edge case when writing to large non-extent file
  ext4: fix ext4_get_blocks references
  ext4: Always journal quota file modifications
  ext4: Fix potential memory leak in ext4_fill_super
  ext4: Don't error out the fs if the user tries to make a file too big
  ext4: allocate stripe-multiple IOs on stripe boundaries
  ext4: move aio completion after unwritten extent conversion
  ...

Fix up conflicts in fs/ext4/inode.c as per Ted.

Fix up xfs conflicts as per earlier xfs merge.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Fix dirtying of journalled buffers in data=journal mode
  ext3: default to ordered mode
  quota: Use mark_inode_dirty_sync instead of mark_inode_dirty
  quota: Change quota error message to print out disk and function name
  MAINTAINERS: Update entries of ext2 and ext3
  MAINTAINERS: Update address of Andreas Dilger
  ext3: Avoid filesystem corruption after a crash under heavy delete load
  ext3: remove vestiges of nobh support
  ext3: Fix set but unused variables
  quota: clean up quota active checks
  quota: Clean up the namespace in dqblk_xfs.h
  quota: check quota reservation on remove_dquot_ref

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  fs/dlm: Drop unnecessary null test
  dlm: use genl_register_family_with_ops()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: super.c Fix warning: variable 'sbi' set but not used
  udf: remove duplicated #include

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [DNS RESOLVER] Minor typo correction
  DNS: Fixes for the DNS query module
  cifs: Include linux/err.h for IS_ERR and PTR_ERR
  DNS: Make AFS go to the DNS for AFSDB records for unknown cells
  DNS: Separate out CIFS DNS Resolver code
  cifs: account for new creduid=0x%x parameter in spnego upcall string
  cifs: reduce false positives with inode aliasing serverino autodisable
  CIFS: Make cifs_convert_address() take a const src pointer and a length
  cifs: show features compiled in as part of DebugData
  cifs: update README

Fix up trivial conflicts in fs/cifs/cifsfs.c due to workqueue changes