Any pointer that was allocated through nfs_alloc_client() needs to be
freed via a call to nfs_free_client().
Reported-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This allows the normal error-paths to handle the error, rather than
making a special call to complete_request_key() just for this instance.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Tested-by: NWilliam Dauchy <wdauchy@gmail.com>
Cc: stable@vger.kernel.org [>= 3.4]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

idmap_pipe_downcall already clears this field if the upcall succeeds,
but if it fails (rpc.idmapd isn't running) the field will still be set
on the next call triggering a BUG_ON().  This patch tries to handle all
possible ways that the upcall could fail and clear the idmap key data
for each one.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Tested-by: NWilliam Dauchy <wdauchy@gmail.com>
Cc: stable@vger.kernel.org [>= 3.4]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of using the private field xdr->p from struct xdr_stream,
use the public xdr_stream_pos().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, we do not take into account the size of the 16 byte
struct nfs4_cached_acl header, when deciding whether or not we should
cache the acl data.  Consequently, we will end up allocating an
8k buffer in order to fit a maximum size 4k acl.

This patch adjusts the calculation so that we limit the cache size
to 4k for the acl header+data.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Resetting the cursor xdr->p to a previous value is not a safe
practice: if the xdr_stream has crossed out of the initial iovec,
then a bunch of other fields would need to be reset too.

Fix this issue by using xdr_enter_page() so that the buffer gets
page aligned at the bitmap _before_ we decode it.

Also fix the confusion of the ACL length with the page buffer length
by not adding the base offset to the ACL length...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

This allows distros to remove the line from their modprobe
configuration.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias
pointing to nfs.ko, rather than nfs4.ko.  This can prevent the v4 module
from loading on mount, since the kernel sees that something named "nfs4"
has already been loaded.  To work around this, I've renamed the modules
to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko".

I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount
-t nfs4` still works.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ever since commit 0a57cdac (NFSv4.1 send layoutreturn to fence
disconnected data server) we've been sending layoutreturn calls
while there is potentially still outstanding I/O to the data
servers. The reason we do this is to avoid races between replayed
writes to the MDS and the original writes to the DS.

When this happens, the BUG_ON() in nfs4_layoutreturn_done can
be triggered because it assumes that we would never call
layoutreturn without knowing that all I/O to the DS is
finished. The fix is to remove the BUG_ON() now that the
assumptions behind the test are obsolete.
Reported-by: NBoaz Harrosh <bharrosh@panasas.com>
Reported-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org [>=3.5]

Depending on layout and ARCH, ORE has some limits on max IO sizes
which is communicated on (what else) ore_layout->max_io_length,
which is always stripe aligned.
This was considered as the pg_test boundary for splitting and starting
a new IO.

But in the case of a long IO where the start offset is not aligned
what would happen is that both end of IO[N] and start of IO[N+1]
would be unaligned, causing each IO boundary parity unit to be
calculated and written twice.

So what we do in this patch is split the very start of an unaligned
IO, up to a stripe boundary, and then next IO's can continue fully
aligned til the end.

We might be sacrificing the case where the full unaligned IO would
fit within a single max_io_length, but the sacrifice is well worth
the elimination of double calculation and parity units IO.
Actually the sacrificing is marginal and is almost unmeasurable.

TODO:
	If we know the total expected linear segment that will
	be received, at pg_init, we could use that information
	in many places:
	1. blocks-layout get_layout write segment size
	2. Better mds-threshold
	3. In above situation for a better clean split

	I will do this in future submission.
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To allow layout driver to pass private information around
pg_init/pg_doio.
Signed-off-by: NPeng Tao <tao.peng@emc.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

since the only user of nfs4_proc_layoutget is send_layoutget, which
ignores its return value, there is no reason to return any value.
Signed-off-by: NIdan Kedar <idank@tonian.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.
Signed-off-by: NIdan Kedar <idank@tonian.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we tear down the nfs_commit_data cache too when
unloading the module.

Cc: Bryan Schumaker <bjschuma@netapp.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Pull irqdomain changes from Grant Likely:
 "Round of refactoring and enhancements to irq_domain infrastructure.
  This series starts the process of simplifying irqdomain.  The ultimate
  goal is to merge LEGACY, LINEAR and TREE mappings into a single
  system, but had to back off from that after some last minute bugs.
  Instead it mainly reorganizes the code and ensures that the reverse
  map gets populated when the irq is mapped instead of the first time it
  is looked up.

  Merging of the irq_domain types is deferred to v3.7

  In other news, this series adds helpers for creating static mappings
  on a linear or tree mapping."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  irqdomain: Improve diagnostics when a domain mapping fails
  irqdomain: eliminate slow-path revmap lookups
  irqdomain: Fix irq_create_direct_mapping() to test irq_domain type.
  irqdomain: Eliminate dedicated radix lookup functions
  irqdomain: Support for static IRQ mapping and association.
  irqdomain: Always update revmap when setting up a virq
  irqdomain: Split disassociating code into separate function
  irq_domain: correct a minor wrong comment for linear revmap
  irq_domain: Standardise legacy/linear domain selection
  irqdomain: Make ops->map hook optional
  irqdomain: Remove unnecessary test for IRQ_DOMAIN_MAP_LEGACY
  irqdomain: Simple NUMA awareness.
  devicetree: add helper inline for retrieving a node's full name

Merge Andrew's second set of patches:
 - MM
 - a few random fixes
 - a couple of RTC leftovers

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
  rtc/rtc-88pm80x: remove unneed devm_kfree
  rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails
  mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
  tmpfs: distribute interleave better across nodes
  mm: remove redundant initialization
  mm: warn if pg_data_t isn't initialized with zero
  mips: zero out pg_data_t when it's allocated
  memcg: gix memory accounting scalability in shrink_page_list
  mm/sparse: remove index_init_lock
  mm/sparse: more checks on mem_section number
  mm/sparse: optimize sparse_index_alloc
  memcg: add mem_cgroup_from_css() helper
  memcg: further prevent OOM with too many dirty pages
  memcg: prevent OOM with too many dirty pages
  mm: mmu_notifier: fix freed page still mapped in secondary MMU
  mm: memcg: only check anon swapin page charges for swap cache
  mm: memcg: only check swap cache pages for repeated charging
  mm: memcg: split swapin charge function into private and public part
  mm: memcg: remove needless !mm fixup to init_mm when charging
  mm: memcg: remove unneeded shmem charge type
  ...

Pull VFIO core from Alex Williamson:
 "This series includes the VFIO userspace driver interface for the 3.6
  kernel merge window.  This driver is intended to provide a secure
  interface for device access using IOMMU protection for applications
  like assignment of physical devices to virtual machines.

  Qemu will be the first user of this interface, enabling assignment of
  PCI devices to Qemu guests.  This interface is intended to eventually
  replace the x86-specific assignment mechanism currently available in
  KVM.

  This interface has the advantage of being more secure, by working with
  IOMMU groups to ensure device isolation and providing it's own
  filtered resource access mechanism, and also more flexible, in not
  being x86 or KVM specific (extensions to enable POWER are already
  working).

  This driver is originally the work of Tom Lyon, but has since been
  handed over to me and gone through a complete overhaul thanks to the
  input from David Gibson, Ben Herrenschmidt, Chris Wright, Joerg
  Roedel, and others.  This driver has been available in linux-next for
  the last month."

Paul Mackerras says:
 "I would be glad to see it go in since we want to use it with KVM on
  PowerPC.  If possible we'd like the PowerPC bits for it to go in as
  well."

* tag 'vfio-for-v3.6' of git://github.com/awilliam/linux-vfio:
  vfio: Add PCI device driver
  vfio: Type1 IOMMU implementation
  vfio: Add documentation
  vfio: VFIO core

Pull random subsystem patches from Ted Ts'o:
 "This patch series contains a major revamp of how we collect entropy
  from interrupts for /dev/random and /dev/urandom.

  The goal is to addresses weaknesses discussed in the paper "Mining
  your Ps and Qs: Detection of Widespread Weak Keys in Network Devices",
  by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J.  Alex Halderman,
  which will be published in the Proceedings of the 21st Usenix Security
  Symposium, August 2012.  (See https://factorable.net for more
  information and an extended version of the paper.)"

Fix up trivial conflicts due to nearby changes in
drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c}

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits)
  random: mix in architectural randomness in extract_buf()
  dmi: Feed DMI table to /dev/random driver
  random: Add comment to random_initialize()
  random: final removal of IRQF_SAMPLE_RANDOM
  um: remove IRQF_SAMPLE_RANDOM which is now a no-op
  sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op
  board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op
  isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op
  goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out
  uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op
  drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op
  xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op
  n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op
  pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op
  i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op
  input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op
  mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op
  ...

Pull final RDMA changes from Roland Dreier:
 - Fix IPoIB to stop using unsafe linkage between networking neighbour
   layer and private path database.
 - Small fixes for bugs found by Fengguang Wu's automated builds.

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Use a private hash table for path lookup in xmit path
  IB/qib: Fix size of cc_supported_table_entries
  RDMA/ucma: Convert open-coded equivalent to memdup_user()
  RDMA/ocrdma: Fix check of GSI CQs
  RDMA/cma: Use PTR_RET rather than if (IS_ERR(...)) + PTR_ERR

Pull second set of media updates from Mauro Carvalho Chehab:

 - radio API: add support to work with radio frequency bands

 - new AM/FM radio drivers: radio-shark, radio-shark2

 - new Remote Controller USB driver: iguanair

 - conversion of several drivers to the v4l2 core control framework

 - new board additions at existing drivers

 - the remaining (and vast majority of the patches) are due to
   drivers/DocBook fixes/cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (154 commits)
  [media] radio-tea5777: use library for 64bits div
  [media] tlg2300: Declare MODULE_FIRMWARE usage
  [media] lgs8gxx: Declare MODULE_FIRMWARE usage
  [media] xc5000: Add MODULE_FIRMWARE statements
  [media] s2255drv: Add MODULE_FIRMWARE statement
  [media] dib8000: move dereference after check for NULL
  [media] Documentation: Update cardlists
  [media] bttv: add support for Aposonic W-DVR
  [media] cx25821: Remove bad strcpy to read-only char*
  [media] pms.c: remove duplicated include
  [media] smiapp-core.c: remove duplicated include
  [media] via-camera: pass correct format settings to sensor
  [media] rtl2832.c: minor cleanup
  [media] Add support for the IguanaWorks USB IR Transceiver
  [media] Minor cleanups for MCE USB
  [media] drivers/media/dvb/siano/smscoreapi.c: use list_for_each_entry
  [media] Use a named union in struct v4l2_ioctl_info
  [media] mceusb: Add Twisted Melon USB IDs
  [media] staging/media/solo6x10: use module_pci_driver macro
  [media] staging/media/dt3155v4l: use module_pci_driver macro
  ...

Conflicts:
	Documentation/feature-removal-schedule.txt

Pull second wave of NFS client updates from Trond Myklebust:

 - Patches from Bryan to allow splitting of the NFSv2/v3/v4 code into
   separate modules.

 - Fix Oopses in the NFSv4 idmapper

 - Fix a deadlock whereby rpciod tries to allocate a new socket and ends
   up recursing into the NFS code due to memory reclaim.

 - Increase the number of permitted callback connections.

* tag 'nfs-for-3.6-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: explicitly reject LOCK_MAND flock() requests
  nfs: increase number of permitted callback connections.
  SUNRPC: return negative value in case rpcbind client creation error
  NFS: Convert v4 into a module
  NFS: Convert v3 into a module
  NFS: Convert v2 into a module
  NFS: Keep module parameters in the generic NFS client
  NFS: Split out remaining NFS v4 inode functions
  NFS: Pass super operations and xattr handlers in the nfs_subversion
  NFS: Only initialize the ACL client in the v3 case
  NFS: Create a try_mount rpc op
  NFS: Remove the NFS v4 xdev mount function
  NFS: Add version registering framework
  NFS: Fix a number of bugs in the idmapper
  nfs: skip commit in releasepage if we're freeing memory for fs-related reasons
  sunrpc: clarify comments on rpc_make_runnable
  pnfsblock: bail out partial page IO

Pull networking update from David S. Miller:
 "I think Eric Dumazet and I have dealt with all of the known routing
  cache removal fallout.  Some other minor fixes all around.

  1) Fix RCU of cached routes, particular of output routes which require
     liberation via call_rcu() instead of call_rcu_bh().  From Eric
     Dumazet.

  2) Make sure we purge net device references in cached routes properly.

  3) TG3 driver bug fixes from Michael Chan.

  4) Fix reported 'expires' value in ipv6 routes, from Li Wei.

  5) TUN driver ioctl leaks kernel bytes to userspace, from Mathias
     Krause."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits)
  ipv4: Properly purge netdev references on uncached routes.
  ipv4: Cache routes in nexthop exception entries.
  ipv4: percpu nh_rth_output cache
  ipv4: Restore old dst_free() behavior.
  bridge: make port attributes const
  ipv4: remove rt_cache_rebuild_count
  net: ipv4: fix RCU races on dst refcounts
  net: TCP early demux cleanup
  tun: Fix formatting.
  net/tun: fix ioctl() based info leaks
  tg3: Update version to 3.124
  tg3: Fix race condition in tg3_get_stats64()
  tg3: Add New 5719 Read DMA workaround
  tg3: Fix Read DMA workaround for 5719 A0.
  tg3: Request APE_LOCK_PHY before PHY access
  ipv6: fix incorrect route 'expires' value passed to userspace
  mISDN: Bugfix only few bytes are transfered on a connection
  seeq: use PTR_RET at init_module of driver
  bnx2x: remove cast around the kmalloc in bnx2x_prev_mark_path
  ipv4: clean up put_child
  ...

devm_kzalloc() doesn't need a matching devm_kfree(), the freeing mechanism
will trigger when driver unloads.
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

At the probe we are assigning ret to return value of PTR_ERR right after
the rtc_register_drive()r, as we would have done it in the if
(IS_ERR(ptr)) check, since the function fails and goes inside that case
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a process creates a large hugetlbfs mapping that is eligible for page
table sharing and forks heavily with children some of whom fault and
others which destroy the mapping then it is possible for page tables to
get corrupted.  Some teardowns of the mapping encounter a "bad pmd" and
output a message to the kernel log.  The final teardown will trigger a
BUG_ON in mm/filemap.c.

This was reproduced in 3.4 but is known to have existed for a long time
and goes back at least as far as 2.6.37.  It was probably was introduced
in 2.6.20 by [39dde65c: shared page table for hugetlb page].  The messages
look like this;

[  ..........] Lots of bad pmd messages followed by this
[  127.164256] mm/memory.c:391: bad pmd ffff880412e04fe8(80000003de4000e7).
[  127.164257] mm/memory.c:391: bad pmd ffff880412e04ff0(80000003de6000e7).
[  127.164258] mm/memory.c:391: bad pmd ffff880412e04ff8(80000003de0000e7).
[  127.186778] ------------[ cut here ]------------
[  127.186781] kernel BUG at mm/filemap.c:134!
[  127.186782] invalid opcode: 0000 [#1] SMP
[  127.186783] CPU 7
[  127.186784] Modules linked in: af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf ext3 jbd dm_mod coretemp crc32c_intel usb_storage ghash_clmulni_intel aesni_intel i2c_i801 r8169 mii uas sr_mod cdrom sg iTCO_wdt iTCO_vendor_support shpchp serio_raw cryptd aes_x86_64 e1000e pci_hotplug dcdbas aes_generic container microcode ext4 mbcache jbd2 crc16 sd_mod crc_t10dif i915 drm_kms_helper drm i2c_algo_bit ehci_hcd ahci libahci usbcore rtc_cmos usb_common button i2c_core intel_agp video intel_gtt fan processor thermal thermal_sys hwmon ata_generic pata_atiixp libata scsi_mod
[  127.186801]
[  127.186802] Pid: 9017, comm: hugetlbfs-test Not tainted 3.4.0-autobuild #53 Dell Inc. OptiPlex 990/06D7TR
[  127.186804] RIP: 0010:[<ffffffff810ed6ce>]  [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[  127.186809] RSP: 0000:ffff8804144b5c08  EFLAGS: 00010002
[  127.186810] RAX: 0000000000000001 RBX: ffffea000a5c9000 RCX: 00000000ffffffc0
[  127.186811] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff88042dfdad00
[  127.186812] RBP: ffff8804144b5c18 R08: 0000000000000009 R09: 0000000000000003
[  127.186813] R10: 0000000000000000 R11: 000000000000002d R12: ffff880412ff83d8
[  127.186814] R13: ffff880412ff83d8 R14: 0000000000000000 R15: ffff880412ff83d8
[  127.186815] FS:  00007fe18ed2c700(0000) GS:ffff88042dce0000(0000) knlGS:0000000000000000
[  127.186816] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  127.186817] CR2: 00007fe340000503 CR3: 0000000417a14000 CR4: 00000000000407e0
[  127.186818] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  127.186819] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  127.186820] Process hugetlbfs-test (pid: 9017, threadinfo ffff8804144b4000, task ffff880417f803c0)
[  127.186821] Stack:
[  127.186822]  ffffea000a5c9000 0000000000000000 ffff8804144b5c48 ffffffff810ed83b
[  127.186824]  ffff8804144b5c48 000000000000138a 0000000000001387 ffff8804144b5c98
[  127.186825]  ffff8804144b5d48 ffffffff811bc925 ffff8804144b5cb8 0000000000000000
[  127.186827] Call Trace:
[  127.186829]  [<ffffffff810ed83b>] delete_from_page_cache+0x3b/0x80
[  127.186832]  [<ffffffff811bc925>] truncate_hugepages+0x115/0x220
[  127.186834]  [<ffffffff811bca43>] hugetlbfs_evict_inode+0x13/0x30
[  127.186837]  [<ffffffff811655c7>] evict+0xa7/0x1b0
[  127.186839]  [<ffffffff811657a3>] iput_final+0xd3/0x1f0
[  127.186840]  [<ffffffff811658f9>] iput+0x39/0x50
[  127.186842]  [<ffffffff81162708>] d_kill+0xf8/0x130
[  127.186843]  [<ffffffff81162812>] dput+0xd2/0x1a0
[  127.186845]  [<ffffffff8114e2d0>] __fput+0x170/0x230
[  127.186848]  [<ffffffff81236e0e>] ? rb_erase+0xce/0x150
[  127.186849]  [<ffffffff8114e3ad>] fput+0x1d/0x30
[  127.186851]  [<ffffffff81117db7>] remove_vma+0x37/0x80
[  127.186853]  [<ffffffff81119182>] do_munmap+0x2d2/0x360
[  127.186855]  [<ffffffff811cc639>] sys_shmdt+0xc9/0x170
[  127.186857]  [<ffffffff81410a39>] system_call_fastpath+0x16/0x1b
[  127.186858] Code: 0f 1f 44 00 00 48 8b 43 08 48 8b 00 48 8b 40 28 8b b0 40 03 00 00 85 f6 0f 88 df fe ff ff 48 89 df e8 e7 cb 05 00 e9 d2 fe ff ff <0f> 0b 55 83 e2 fd 48 89 e5 48 83 ec 30 48 89 5d d8 4c 89 65 e0
[  127.186868] RIP  [<ffffffff810ed6ce>] __delete_from_page_cache+0x15e/0x160
[  127.186870]  RSP <ffff8804144b5c08>
[  127.186871] ---[ end trace 7cbac5d1db69f426 ]---

The bug is a race and not always easy to reproduce.  To reproduce it I was
doing the following on a single socket I7-based machine with 16G of RAM.

$ hugeadm --pool-pages-max DEFAULT:13G
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmmax
$ echo $((18*1048576*1024)) > /proc/sys/kernel/shmall
$ for i in `seq 1 9000`; do ./hugetlbfs-test; done

On my particular machine, it usually triggers within 10 minutes but
enabling debug options can change the timing such that it never hits.
Once the bug is triggered, the machine is in trouble and needs to be
rebooted.  The machine will respond but processes accessing proc like "ps
aux" will hang due to the BUG_ON.  shutdown will also hang and needs a
hard reset or a sysrq-b.

The basic problem is a race between page table sharing and teardown.  For
the most part page table sharing depends on i_mmap_mutex.  In some cases,
it is also taking the mm->page_table_lock for the PTE updates but with
shared page tables, it is the i_mmap_mutex that is more important.

Unfortunately it appears to be also insufficient. Consider the following
situation

Process A					Process B
---------					---------
hugetlb_fault					shmdt
  						LockWrite(mmap_sem)
    						  do_munmap
						    unmap_region
						      unmap_vmas
						        unmap_single_vma
						          unmap_hugepage_range
      						            Lock(i_mmap_mutex)
							    Lock(mm->page_table_lock)
							    huge_pmd_unshare/unmap tables <--- (1)
							    Unlock(mm->page_table_lock)
      						            Unlock(i_mmap_mutex)
  huge_pte_alloc				      ...
    Lock(i_mmap_mutex)				      ...
    vma_prio_walk, find svma, spte		      ...
    Lock(mm->page_table_lock)			      ...
    share spte					      ...
    Unlock(mm->page_table_lock)			      ...
    Unlock(i_mmap_mutex)			      ...
  hugetlb_no_page									  <--- (2)
						      free_pgtables
						        unlink_file_vma
							hugetlb_free_pgd_range
						    remove_vma_list

In this scenario, it is possible for Process A to share page tables with
Process B that is trying to tear them down.  The i_mmap_mutex on its own
does not prevent Process A walking Process B's page tables.  At (1) above,
the page tables are not shared yet so it unmaps the PMDs.  Process A sets
up page table sharing and at (2) faults a new entry.  Process B then trips
up on it in free_pgtables.

This patch fixes the problem by adding a new function
__unmap_hugepage_range_final that is only called when the VMA is about to
be destroyed.  This function clears VM_MAYSHARE during
unmap_hugepage_range() under the i_mmap_mutex.  This makes the VMA
ineligible for sharing and avoids the race.  Superficially this looks like
it would then be vunerable to truncate and madvise issues but hugetlbfs
has its own truncate handlers so does not use unmap_mapping_range() and
does not support madvise(DONTNEED).

This should be treated as a -stable candidate if it is merged.

Test program is as follows. The test case was mostly written by Michal
Hocko with a few minor changes to reproduce this bug.

==== CUT HERE ====

static size_t huge_page_size = (2UL << 20);
static size_t nr_huge_page_A = 512;
static size_t nr_huge_page_B = 5632;

unsigned int get_random(unsigned int max)
{
	struct timeval tv;

	gettimeofday(&tv, NULL);
	srandom(tv.tv_usec);
	return random() % max;
}

static void play(void *addr, size_t size)
{
	unsigned char *start = addr,
		      *end = start + size,
		      *a;
	start += get_random(size/2);

	/* we could itterate on huge pages but let's give it more time. */
	for (a = start; a < end; a += 4096)
		*a = 0;
}

int main(int argc, char **argv)
{
	key_t key = IPC_PRIVATE;
	size_t sizeA = nr_huge_page_A * huge_page_size;
	size_t sizeB = nr_huge_page_B * huge_page_size;
	int shmidA, shmidB;
	void *addrA = NULL, *addrB = NULL;
	int nr_children = 300, n = 0;

	if ((shmidA = shmget(key, sizeA, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
		perror("shmget:");
		return 1;
	}

	if ((addrA = shmat(shmidA, addrA, SHM_R|SHM_W)) == (void *)-1UL) {
		perror("shmat");
		return 1;
	}
	if ((shmidB = shmget(key, sizeB, IPC_CREAT|SHM_HUGETLB|0660)) == -1) {
		perror("shmget:");
		return 1;
	}

	if ((addrB = shmat(shmidB, addrB, SHM_R|SHM_W)) == (void *)-1UL) {
		perror("shmat");
		return 1;
	}

fork_child:
	switch(fork()) {
		case 0:
			switch (n%3) {
			case 0:
				play(addrA, sizeA);
				break;
			case 1:
				play(addrB, sizeB);
				break;
			case 2:
				break;
			}
			break;
		case -1:
			perror("fork:");
			break;
		default:
			if (++n < nr_children)
				goto fork_child;
			play(addrA, sizeA);
			break;
	}
	shmdt(addrA);
	shmdt(addrB);
	do {
		wait(NULL);
	} while (--n > 0);
	shmctl(shmidA, IPC_RMID, NULL);
	shmctl(shmidB, IPC_RMID, NULL);
	return 0;
}

[akpm@linux-foundation.org: name the declaration's args, fix CONFIG_HUGETLBFS=n build]
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When tmpfs has the interleave memory policy, it always starts allocating
for each file from node 0 at offset 0.  When there are many small files,
the lower nodes fill up disproportionately.

This patch spreads out node usage by starting files at nodes other than 0,
by using the inode number to bias the starting node for interleave.
Signed-off-by: NNathan Zimmer <nzimmer@sgi.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

pg_data_t is zeroed before reaching free_area_init_core(), so remove the
now unnecessary initializations.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Warn if memory-hotplug/boot code doesn't initialize pg_data_t with zero
when it is allocated.  Arch code and memory hotplug already initiailize
pg_data_t.  So this warning should never happen.  I select fields randomly
near the beginning, middle and end of pg_data_t for checking.

This patch isn't for performance but for removing initialization code
which is necessary to add whenever we adds new field to pg_data_t or zone.

Firstly, Andrew suggested clearing out of pg_data_t in MM core part but
Tejun doesn't like it because in the future, some archs can initialize
some fields in arch code and pass them into general MM part so blindly
clearing it out in mm core part would be very annoying.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is preparation for the next patch which removes the zeroing of
the pg_data_t in core MM.  All archs except MIPS already do this.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I noticed in a multi-process parallel files reading benchmark I ran on a 8
socket machine, throughput slowed down by a factor of 8 when I ran the
benchmark within a cgroup container.  I traced the problem to the
following code path (see below) when we are trying to reclaim memory from
file cache.  The res_counter_uncharge function is called on every page
that's reclaimed and created heavy lock contention.  The patch below
allows the reclaimed pages to be uncharged from the resource counter in
batch and recovered the regression.

Tim

     40.67%           usemem  [kernel.kallsyms]                   [k] _raw_spin_lock
                      |
                      --- _raw_spin_lock
                         |
                         |--92.61%-- res_counter_uncharge
                         |          |
                         |          |--100.00%-- __mem_cgroup_uncharge_common
                         |          |          |
                         |          |          |--100.00%-- mem_cgroup_uncharge_cache_page
                         |          |          |          __remove_mapping
                         |          |          |          shrink_page_list
                         |          |          |          shrink_inactive_list
                         |          |          |          shrink_mem_cgroup_zone
                         |          |          |          shrink_zone
                         |          |          |          do_try_to_free_pages
                         |          |          |          try_to_free_pages
                         |          |          |          __alloc_pages_nodemask
                         |          |          |          alloc_pages_current
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sparse_index_init() uses the index_init_lock spinlock to protect root
mem_section assignment.  The lock is not necessary anymore because the
function is called only during boot (during paging init which is executed
only from a single CPU) and from the hotplug code (by add_memory() via
arch_add_memory()) which uses mem_hotplug_mutex.

The lock was introduced by 28ae55c9 ("sparsemem extreme: hotplug
preparation") and sparse_index_init() was used only during boot at that
time.

Later when the hotplug code (and add_memory()) was introduced there was no
synchronization so it was possible to online more sections from the same
root probably (though I am not 100% sure about that).  The first
synchronization has been added by 6ad696d2 ("mm: allow memory hotplug and
hibernation in the same kernel") which was later replaced by the
mem_hotplug_mutex - 20d6c96b ("mem-hotplug: introduce
{un}lock_memory_hotplug()").

Let's remove the lock as it is not needed and it makes the code more
confusing.

[mhocko@suse.cz: changelog]
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__section_nr() was implemented to retrieve the corresponding memory
section number according to its descriptor.  It's possible that the
specified memory section descriptor doesn't exist in the global array.  So
add more checking on that and report an error for a wrong case.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With CONFIG_SPARSEMEM_EXTREME, the two levels of memory section
descriptors are allocated from slab or bootmem.  When allocating from
slab, let slab/bootmem allocator clear the memory chunk.  We needn't clear
it explicitly.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a mem_cgroup_from_css() helper to replace open-coded invokations of
container_of().  To clarify the code and to add a little more type safety.

[akpm@linux-foundation.org: fix extensive breakage]
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The may_enter_fs test turns out to be too restrictive: though I saw no
problem with it when testing on 3.5-rc6, it very soon OOMed when I tested
on 3.5-rc6-mm1.  I don't know what the difference there is, perhaps I just
slightly changed the way I started off the testing: dd if=/dev/zero
of=/mnt/temp bs=1M count=1024; rm -f /mnt/temp; sync repeatedly, in 20M
memory.limit_in_bytes cgroup to ext4 on USB stick.

ext4 (and gfs2 and xfs) turn out to allocate new pages for writing with
AOP_FLAG_NOFS: that seems a little worrying, and it's unclear to me why
the transaction needs to be started even before allocating pagecache
memory.  But it may not be worth worrying about these days: if direct
reclaim avoids FS writeback, does __GFP_FS now mean anything?

Anyway, we insisted on the may_enter_fs test to avoid hangs with the loop
device; but since that also masks off __GFP_IO, we can test for __GFP_IO
directly, ignoring may_enter_fs and __GFP_FS.

But even so, the test still OOMs sometimes: when originally testing on
3.5-rc6, it OOMed about one time in five or ten; when testing just now on
3.5-rc6-mm1, it OOMed on the first iteration.

This residual problem comes from an accumulation of pages under ordinary
writeback, not marked PageReclaim, so rightly not causing the memcg check
to wait on their writeback: these too can prevent shrink_page_list() from
freeing any pages, so many times that memcg reclaim fails and OOMs.

Deal with these in the same way as direct reclaim now deals with dirty FS
pages: mark them PageReclaim.  It is appropriate to rotate these to tail
of list when writepage completes, but more importantly, the PageReclaim
flag makes memcg reclaim wait on them if encountered again.  Increment
NR_VMSCAN_IMMEDIATE?  That's arguable: I chose not.

Setting PageReclaim here may occasionally race with end_page_writeback()
clearing it: lru_deactivate_fn() already faced the same race, and
correctly concluded that the window is small and the issue non-critical.

With these changes, the test runs indefinitely without OOMing on ext4,
ext3 and ext2: I'll move on to test with other filesystems later.

Trivia: invert conditions for a clearer block without an else, and goto
keep_locked to do the unlock_page.
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current implementation of dirty pages throttling is not memcg aware
which makes it easy to have memcg LRUs full of dirty pages.  Without
throttling, these LRUs can be scanned faster than the rate of writeback,
leading to memcg OOM conditions when the hard limit is small.

This patch fixes the problem by throttling the allocating process
(possibly a writer) during the hard limit reclaim by waiting on
PageReclaim pages.  We are waiting only for PageReclaim pages because
those are the pages that made one full round over LRU and that means that
the writeback is much slower than scanning.

The solution is far from being ideal - long term solution is memcg aware
dirty throttling - but it is meant to be a band aid until we have a real
fix.  We are seeing this happening during nightly backups which are placed
into containers to prevent from eviction of the real working set.

The change affects only memcg reclaim and only when we encounter
PageReclaim pages which is a signal that the reclaim doesn't catch up on
with the writers so somebody should be throttled.  This could be
potentially unfair because it could be somebody else from the group who
gets throttled on behalf of the writer but as writers need to allocate as
well and they allocate in higher rate the probability that only innocent
processes would be penalized is not that high.

I have tested this change by a simple dd copying /dev/zero to tmpfs or
ext3 running under small memcg (1G copy under 5M, 60M, 300M and 2G
containers) and dd got killed by OOM killer every time.  With the patch I
could run the dd with the same size under 5M controller without any OOM.
The issue is more visible with slower devices for output.

* With the patch
================
* tmpfs size=2G
---------------
$ vim cgroup_cache_oom_test.sh
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 30.4049 s, 34.5 MB/s
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 31.4561 s, 33.3 MB/s
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 20.4618 s, 51.2 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 1.42172 s, 738 MB/s

* ext3
------
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 27.9547 s, 37.5 MB/s
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 30.3221 s, 34.6 MB/s
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 24.5764 s, 42.7 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 3.35828 s, 312 MB/s

* Without the patch
===================
* tmpfs size=2G
---------------
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
./cgroup_cache_oom_test.sh: line 46:  4668 Killed                  dd if=/dev/zero of=$OUT/zero bs=1M count=$count
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 25.4989 s, 41.1 MB/s
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 24.3928 s, 43.0 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 1.49797 s, 700 MB/s

* ext3
------
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
./cgroup_cache_oom_test.sh: line 46:  4689 Killed                  dd if=/dev/zero of=$OUT/zero bs=1M count=$count
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
./cgroup_cache_oom_test.sh: line 46:  4692 Killed                  dd if=/dev/zero of=$OUT/zero bs=1M count=$count
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 20.248 s, 51.8 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 2.85201 s, 368 MB/s

[akpm@linux-foundation.org: tweak changelog, reordered the test to optimize for CONFIG_CGROUP_MEM_RES_CTLR=n]
[hughd@google.com: fix deadlock with loop driver]
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: NMel Gorman <mgorman@suse.de>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NMichal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mmu_notifier_release() is called when the process is exiting.  It will
delete all the mmu notifiers.  But at this time the page belonging to the
process is still present in page tables and is present on the LRU list, so
this race will happen:

      CPU 0                 CPU 1
mmu_notifier_release:    try_to_unmap:
   hlist_del_init_rcu(&mn->hlist);
                            ptep_clear_flush_notify:
                                  mmu nofifler not found
                            free page  !!!!!!
                            /*
                             * At the point, the page has been
                             * freed, but it is still mapped in
                             * the secondary MMU.
                             */

  mn->ops->release(mn, mm);

Then the box is not stable and sometimes we can get this bug:

[  738.075923] BUG: Bad page state in process migrate-perf  pfn:03bec
[  738.075931] page:ffffea00000efb00 count:0 mapcount:0 mapping:          (null) index:0x8076
[  738.075936] page flags: 0x20000000000014(referenced|dirty)

The same issue is present in mmu_notifier_unregister().

We can call ->release before deleting the notifier to ensure the page has
been unmapped from the secondary MMU before it is freed.
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shmem knows for sure that the page is in swap cache when attempting to
charge a page, because the cache charge entry function has a check for it.
Only anon pages may be removed from swap cache already when trying to
charge their swapin.

Adjust the comment, though: '4969c119 mm: fix swapin race condition' added
a stable PageSwapCache check under the page lock in the do_swap_page()
before calling the memory controller, so it's unuse_pte()'s pte_same()
that may fail.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only anon and shmem pages in the swap cache are attempted to be charged
multiple times, from every swap pte fault or from shmem_unuse().  No other
pages require checking PageCgroupUsed().

Charging pages in the swap cache is also serialized by the page lock, and
since both the try_charge and commit_charge are called under the same page
lock section, the PageCgroupUsed() check might as well happen before the
counter charging, let alone reclaim.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When shmem is charged upon swapin, it does not need to check twice whether
the memory controller is enabled.

Also, shmem pages do not have to be checked for everything that regular
anon pages have to be checked for, so let shmem use the internal version
directly and allow future patches to move around checks that are only
required when swapping in anon pages.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>