Free page_list buffer on error path of mthca_reg_phys_mr().
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Split allocation of MTT range from creation of MR.  This will be useful for
implementing shared memory regions and userspace verbs.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make mthca_table_put() and mthca_table_put_range() NOPs if the device is not
mem-free, so that we don't have to have "if (mthca_is_memfree())" tests in the
callers of these functions.  This makes our code more readable and
maintainable, and saves a couple dozen bytes of text in ib_mthca.ko as well.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix memset to use sizeof *props instead of just sizeof props.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for unreliable connected (UC) transport to mthca driver:
 - Add attributes for UC to modify QP table.
 - Add support for posting UC work requests.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mthca apparently had the meanings of the max_rd_atomic and max_dest_rd_atomic
QP attributes backwards.  max_rd_atomic limits the maximum number of
outstanding RDMA/atomic requests as an initiator (on a send queue), and
max_dest_rd_atomic specifies the resources allocated to handle RMDA/atomic
requests from the remote end of the connection.  We were programming our QP
context with these values swapped.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix offset of static_rate in QP context.  Pointed out by Dror Goldenberg.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switch all allocations of coherent memory from pci_alloc_consistent() to
dma_alloc_coherent(), so that we can pass GFP_KERNEL.  This should help when
the system is low on memory.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up CQ debugging code: make dump_cqe print on one line, and only dump
error CQ entries for local operation errors.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Fix incorrect cut-n-paste in error messages.
- Add missing newlines in error messages.
- Use DRV_NAME instead of "ib_mthca" in a couple of places.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add Sun copyright to files modified by Tom Duffy.
Signed-off-by: NTom Duffy <tduffy@sun.com>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I believe at least for seccomp it's worth to turn off the tsc, not just for
HT but for the L2 cache too.  So it's up to you, either you turn it off
completely (which isn't very nice IMHO) or I recommend to apply this below
patch.

This has been tested successfully on x86-64 against current cogito
repository (i686 compiles so I didn't bother testing ;).  People selling
the cpu through cpushare may appreciate this bit for a peace of mind.

There's no way to get any timing info anymore with this applied
(gettimeofday is forbidden of course).  The seccomp environment is
completely deterministic so it can't be allowed to get timing info, it has
to be deterministic so in the future I can enable a computing mode that
does a parallel computing for each task with server side transparent
checkpointing and verification that the output is the same from all the 2/3
seller computers for each task, without the buyer even noticing (for now
the verification is left to the buyer client side and there's no
checkpointing, since that would require more kernel changes to track the
dirty bits but it'll be easy to extend once the basic mode is finished).

Eliminating a cold-cache read of the cr4 global variable will save one
cacheline during the tlb flush while making the code per-cpu-safe at the
same time.  Thanks to Mikael Pettersson for noticing the tlb flush wasn't
per-cpu-safe.

The global tlb flush can run from irq (IPI calling do_flush_tlb_all) but
it'll be transparent to the switch_to code since the IPI won't make any
change to the cr4 contents from the point of view of the interrupted code
and since it's now all per-cpu stuff, it will not race.  So no need to
disable irqs in switch_to slow path.
Signed-off-by: NAndrea Arcangeli <andrea@cpushare.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a couple of missing symbol exports.  flush_dcache_page is
used by the AGP driver and rtc_lock by the RTC driver.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes CONFIG_PMAC_PBOOK (PowerBook support).  This is now
split into CONFIG_PMAC_MEDIABAY for the actual hotswap bay that some
powerbooks have, CONFIG_PM for power management related code, and just left
out of any CONFIG_* option for some generally useful stuff that can be used
on non-laptops as well.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The macserial driver has been obsoleted by the new pmac_zilog driver for a
while now and probably doesn't even work anymore on recent kernels.  This
patch removes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The Power Management Unit on PowerMacs is very sensitive to timeouts during
async message exchanges.  It uses rather crude protocol based on a shift
register with an interrupt and is almost continuously exchanging messages with
the host CPU on laptops.

This patch adds a routine to the open_pic driver to be able to select a PMU
driver so that it bumps it's interrupt priority to above the normal level.

This will allow PMU interrupts to occur while another interrupt is pending,
and thus reduce the risk of machine beeing abruptly shutdown by the PMU due to
a timeout in PMU communication caused by excessive interrupt latency.  The
problem is very rare, and usually just doesn't happen, but it is still useful
to make things even more robust.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The proposed _tlbie call at update_mmu_cache() is safe because:

Addresses for which update_mmu_cache() gets invocated are never inside the
static kernel virtual mapping, meaning that there is no risk for the
_tlbie() here to be thrashing the pinned entry, as Dan suspected.

The intermediate TLB state in which this bug can be triggered is not
visible by userspace or any other contexts, except the page fault handling
path.  So there is no need to worry about userspace dcbxxx users.

The other solution to this is to avoid dcbst misbehaviour in the first
place, which involves changing in-kernel "dcbst" callers to use 8xx
specific SPR's.

Summary:

On 8xx, cache control instructions (particularly "dcbst" from
flush_dcache_icache) fault as write operation if there is an unpopulated
TLB entry for the address in question.  To workaround that, we invalidate
the TLB here, thus avoiding dcbst misbehaviour.
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

arch/mips/kernel/signal.c: In function 'do_signal':
arch/mips/kernel/signal.c:460: error: too many arguments to function 'try_to_freeze'
Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I spotted this issue while in memmap_init last week.  I can't say the
change has any test coverage by me.  start_pfn was formerly used in main
"for" loop.  The fix is replace start_pfn with pfn.
Signed-off-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lost a curly brace in translation.  Everything is better now.
Signed-off-by: NMatt McClintock <msm@freescale.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some manual fixups required due to clashes with the PF_FREEZE cleanups.

CONFIG_CONFIG_TUNER_MULTI_I2C probably isn't what the
author meant to create.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If cfq is managing a queue and a new scheduler is later selected, it is
possible for the cfqd unplug_work work to be queued after the kblockd
work struct has been flushed.  The problem is the ordering of
cfq_shutdown_timer_wq() and blk_put_queue() in cfq_put_cfqd().  The
latter may rearm the work, leaving cfq_kick_queue() with dead data.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add ioprio documentation
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Adjust slice values

- Instead of one async queue, one is defined per priority level. This
  prevents kernel threads (such as reiserfs/x and others) that run at
  higher io priority from conflicting with others. Previously, it was a
  coin toss what io prio the async queue got, it was defined by who
  first set up the queue.

- Let a time slice only begin, when the previous slice is completely
  done. Previously we could be somewhat unfair to a new sync slice, if
  the previous slice was async and had several ios queued. This might
  need a little tweaking if throughput suffers a little due to this,
  allowing perhaps an overlap of a single request or so.

- Optimize the calling of kblockd_schedule_work() by doing it only when
  it is strictly necessary (no requests in driver and work left to do).

- Correct sync vs async logic. A 'normal' process can be purely async as
  well, and a flusher can be purely sync as well. Sync or async is now a
  property of the class defined and requests pending. Previously writers
  could be considered sync, when they were really async.

- Get rid of the bit fields in cfqq and crq, use flags instead.

- Various other cleanups and fixes
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In cfq_find_next_crq(), cfq tries to find the next request by choosing
one of two requests before and after the current one.  Currently, when
choosing the next request, if there's no next request, the next
candidate is NULL, resulting in selection of the previous request.  This
results in weird scheduling.  Once we reach the end, we always seek
backward.

The correct behavior is using the first request as the next candidate.
cfq_choose_req() already has logics for handling wrapped requests.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This updates the CFQ io scheduler to the new time sliced design (cfq
v3).  It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes.  It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls.  The latter closely mimic
set/getpriority.

This import is based on my latest from -mm.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Deepak Saxena

Accidently swapped the order of movne and orrne. Bad.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Michael Burian

This does not look like an include file for "i386", so use "ARM" instead.
Signed-off-by: NMichael Burian <dynmail1@gassner-waagen.at>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It doesn't make sense for this to be in mm-armv.c now that 26-bit
ARM support is no longer integrated into arch/arm.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It doesn't make sense to have the PGD kernel pointers initialisation
separate from the PGD user pointers, especially when we clean the
data cache over the whole range.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This call allows the dynamic tick support to reprogram the timer
immediately before the CPU idles.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

My scripts missed committing this file.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>