On IA64 instruction opcode must be 16 bytes alignment, in kprobe structure
there is one element to save original instruction, currently saved opcode
is not statically allocated in kprobe structure, that can not assure
16 bytes alignment. This patch dynamically allocated kprobe instruction
opcode to assure 16 bytes alignment.
Signed-off-by: Nbibo mao <bibo.mao@intel.com>
Acked-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Kprobe inserts breakpoint instruction in probepoint and then jumps to
instruction slot when breakpoint is hit, the instruction slot icache must
be consistent with dcache.  Here is the patch which invalidates instruction
slot icache area.

Without this patch, in some machines there will be fault when executing
instruction slot where icache content is inconsistent with dcache.
Signed-off-by: Nbibo,mao <bibo.mao@intel.com>
Acked-by: N"Luck, Tony" <tony.luck@intel.com>
Acked-by: NKeshavamurthy Anil S <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With this patch Kprobes now registers for page fault notifications only when
their is an active probe registered.  Once all the active probes are
unregistered their is no need to be notified of page faults and kprobes
unregisters itself from the page fault notifications.  Hence we will have ZERO
side effects when no probes are active.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When jprobe is hit, the function parameters of the original function
should be saved before jprobe handler is executed, and restored it after
jprobe handler is executed, because jprobe handler might change the
register values due to tail call optimization by the gcc.
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The following patch (against 2.6.15-rc5-mm3) fixes a kprobes build break
due to changes introduced in the kprobe locking in 2.6.15-rc5-mm3.  In
addition, the patch reverts back the open-coding of kprobe_mutex.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently arch_remove_kprobes() is only implemented/required for x86_64 and
powerpc.  All other architecture like IA64, i386 and sparc64 implementes a
dummy function which is being called from arch independent kprobes.c file.

This patch removes the dummy functions and replaces it with
#define arch_remove_kprobe(p, s)	do { } while(0)
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since Kprobes runtime exception handlers is now lock free as this code path is
now using RCU to walk through the list, there is no need for the
register/unregister{_kprobe} to use spin_{lock/unlock}_isr{save/restore}.  The
serialization during registration/unregistration is now possible using just a
mutex.

In the above process, this patch also fixes a minor memory leak for x86_64 and
powerpc.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The arch specific kprobes.h files never gets included when CONFIG_KPROBES is
turned off.  Hence check for CONFIG_KPROBES is not appropriate here in this
arch specific kprobes.h files.

Also the below defined function kprobes_exception_notify() is not needed when
CONFIG_KPROBES is off.

Compile tested for both CONFIG_KPROBES=y and N.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

IA64 changes to track kprobe execution on a per-cpu basis.  We now track the
kprobe state machine independently on each cpu using an arch specific kprobe
control block.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a race condition where in system used to hang or sometime
crash within minutes when kprobes are inserted on ISR routine and a task
routine.

The fix has been stress tested on i386, ia64, pp64 and on x86_64.  To
reproduce the problem insert kprobes on schedule() and do_IRQ() functions
and you should see hang or system crash.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch implements function return probes for ia64 using
the revised design.  With this new design we no longer need to do some
of the odd hacks previous required on the last ia64 return probe port
that I sent out for comments.

Note that this new implementation still does not resolve the problem noted
by Keith Owens where backtrace data is lost after a return probe is hit.

Changes include:
 * Addition of kretprobe_trampoline to act as a dummy function for instrumented
   functions to return to, and for the return probe infrastructure to place
   a kprobe on on, gaining control so that the return probe handler
   can be called, and so that the instruction pointer can be moved back
   to the original return address.
 * Addition of arch_init(), allowing a kprobe to be registered on
   kretprobe_trampoline
 * Addition of trampoline_probe_handler() which is used as the pre_handler
   for the kprobe inserted on kretprobe_implementation.  This is the function
   that handles the details for calling the return probe handler function
   and returning control back at the original return address
 * Addition of arch_prepare_kretprobe() which is setup as the pre_handler
   for a kprobe registered at the beginning of the target function by
   kernel/kprobes.c so that a return probe instance can be setup when
   a caller enters the target function.  (A return probe instance contains
   all the needed information for trampoline_probe_handler to do it's job.)
 * Hooks added to the exit path of a task so that we can cleanup any left-over
   return probe instances (i.e. if a task dies while inside a targeted function
   then the return probe instance was reserved at the beginning of the function
   but the function never returns so we need to mark the instance as unused.)
Signed-off-by: NRusty Lynch <rusty.lynch@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that PPC64 has no-execute support, here is a second try to fix the
single step out of line during kprobe execution.  Kprobes on x86_64 already
solved this problem by allocating an executable page and using it as the
scratch area for stepping out of line.  Reuse that.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The current Kprobes when patching the original instruction with the break
instruction tries to retain the original qualifying predicate(qp), however
for cmp.crel.ctype where ctype == unc, which is a special instruction
always needs to be executed irrespective of qp.  Hence, if the instruction
we are patching is of this type, then we should not copy the original qp to
the break instruction, this is because we always want the break fault to
happen so that we can emulate the instruction.

This patch is based on the feedback given by David Mosberger
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A cleanup of the ia64 kprobes implementation such that all of the bundle
manipulation logic is concentrated in arch_prepare_kprobe().

With the current design for kprobes, the arch specific code only has a
chance to return failure inside the arch_prepare_kprobe() function.

This patch moves all of the work that was happening in arch_copy_kprobe()
and most of the work that was happening in arch_arm_kprobe() into
arch_prepare_kprobe().  By doing this we can add further robustness checks
in arch_arm_kprobe() and refuse to insert kprobes that will cause problems.
Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is required to support kprobe on branch/call instructions.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds IA64 architecture specific JProbes support on top of Kprobes
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is an IA64 arch specific handling of Kprobes
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NRusty Lynch <Rusty.lynch@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds function-return probes to kprobes for the i386
architecture.  This enables you to establish a handler to be run when a
function returns.

1. API

Two new functions are added to kprobes:

	int register_kretprobe(struct kretprobe *rp);
	void unregister_kretprobe(struct kretprobe *rp);

2. Registration and unregistration

2.1 Register

  To register a function-return probe, the user populates the following
  fields in a kretprobe object and calls register_kretprobe() with the
  kretprobe address as an argument:

  kp.addr - the function's address

  handler - this function is run after the ret instruction executes, but
  before control returns to the return address in the caller.

  maxactive - The maximum number of instances of the probed function that
  can be active concurrently.  For example, if the function is non-
  recursive and is called with a spinlock or mutex held, maxactive = 1
  should be enough.  If the function is non-recursive and can never
  relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should
  be enough.  maxactive is used to determine how many kretprobe_instance
  objects to allocate for this particular probed function.  If maxactive <=
  0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 *
  NR_CPUS) else maxactive=NR_CPUS)

  For example:

    struct kretprobe rp;
    rp.kp.addr = /* entrypoint address */
    rp.handler = /*return probe handler */
    rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */
    register_kretprobe(&rp);

  The following field may also be of interest:

  nmissed - Initialized to zero when the function-return probe is
  registered, and incremented every time the probed function is entered but
  there is no kretprobe_instance object available for establishing the
  function-return probe (i.e., because maxactive was set too low).

2.2 Unregister

  To unregiter a function-return probe, the user calls
  unregister_kretprobe() with the same kretprobe object as registered
  previously.  If a probed function is running when the return probe is
  unregistered, the function will return as expected, but the handler won't
  be run.

3. Limitations

3.1 This patch supports only the i386 architecture, but patches for
    x86_64 and ppc64 are anticipated soon.

3.2 Return probes operates by replacing the return address in the stack
    (or in a known register, such as the lr register for ppc).  This may
    cause __builtin_return_address(0), when invoked from the return-probed
    function, to return the address of the return-probes trampoline.

3.3 This implementation uses the "Multiprobes at an address" feature in
    2.6.12-rc3-mm3.

3.4 Due to a limitation in multi-probes, you cannot currently establish
    a return probe and a jprobe on the same function.  A patch to remove
    this limitation is being tested.

This feature is required by SystemTap (http://sourceware.org/systemtap),
and reflects ideas contributed by several SystemTap developers, including
Will Cohen and Ananth Mavinakayanahalli.
Signed-off-by: NHien Nguyen <hien@us.ibm.com>
Signed-off-by: NPrasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@laposte.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!