There is no machine class overriding this.  If non linear translations
are implemented again for some machines then this could be restored at
that time.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The restriction on !CONFIG_HIGHMEM is unneeded since page tables are
currently never allocated with highmem pages, and actually disable PTE
dump whenever highmem is configured.  Let's have a dynamic test to better
describe the current limitation instead.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Commit 8d5796d2 allows for the vmalloc
area to be resized from the kernel cmdline.  Make sure it cannot overlap
with RAM entirely.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make free_area() arguments pfn based, and return number of freed pages.
This will simplify highmem initialization later.

Also, codepages, datapages and initpages are actually codesize, datasize
and initsize.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Doing so will greatly simplify the bootmem initialization code as each
bank is therefore entirely lowmem or highmem with no crossing between
those zones.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently there are two instances of struct meminfo: one in
kernel/setup.c marked __initdata, and another in mm/init.c with
permanent storage.  Let's keep only the later to directly populate
the permanent version from arm_add_memory().

Also move common validation tests between the MMU and non-MMU cases
into arm_add_memory() to remove some duplication.  Protection against
overflowing the membank array is also moved in there in order to cover
the kernel cmdline parsing path as well.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In all cases the kaddr is assigned an input register even though it is
modified in the assembly code.  Let's assign a new variable to the
modified value and mark those inline asm with volatile otherwise they
get optimized away because the output variable is otherwise not used.

Also fix a few conversion errors in copypage-feroceon.c and
copypage-v4mc.c.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

For similar reasons as copy_user_page(), we want to avoid the
additional kmap_atomic if it's unnecessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We used to override the copy_user_page() function.  However, this
is not only inefficient, it also causes additional complexity for
highmem support, since we convert from a struct page to a kernel
direct mapped address and back to a struct page again.

Moreover, with highmem support, we end up pointlessly setting up
kmap entries for pages which we're going to remap.  So, push the
kmapping down into the copypage implementation files where it's
required.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Use the correct wake-up enable register, and make it
work with 34xx also.
Signed-off-by: NTero Kristo <tero.kristo@nokia.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The second clk_deny_idle instance should be clk_allow_idle instead.
Signed-off-by: NAmit Kucheria <amit.kucheria@verdurent.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

The G3IPL expects the value at RAM address 0xa020b020 to be
exactly 1 to setup the bluetooth GPIOs properly. The actual
code got a value from gpio_get_value() which was not 1, but
a "not equal to 0" integer.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NEric Miao <eric.miao@marvell.com>

In the resume bootstrap, the early disable address is wrong.
Fix it to RAM address 0xa020b000 instead of 0xa0200000, and
make it consistent with RESUME_ENABLE_ADDR in mioa701.c.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NEric Miao <eric.miao@marvell.com>

This patch makes do_hw_reset the default reboot behavior when nothing
else matches. This restores reboot functionality on gumstix basix
devices where reboot=cold is the default boot argument.
Signed-off-by: NJaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The original incorrect configuration caused GPIO79_nCS_3 being overriden,
thus resulted in the NAND flash not being detected. The real PSKTSEL pin
is on GPIO104 instead of GPIO79.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

FLASH_* and EPROM_* constants are unused, and clash with drivers:

drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined
drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined
drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined

so remove them.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu':
arch/arm/mm/dma-mapping.c:588: warning: statement with no effect
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that the critical read back to flush the next descriptor address is
fixed we can downgrade some BUG_ONs that need only be enabled when testing
changes to the driver.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NEric Miao <eric.miao@marvell.com>

Mikael Pettersson reported:

   The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0
   (the first ethernet port) on my Thecus n2100 XScale box.

   There is however still a strange "ghost" device that gets partially
   detected in 2.6.28-rc2 vanilla.

The IOP321 manual says:

  The user designates the memory region containing the OCCDR as
  non-cacheable and non-bufferable from the IntelR XScaleTM core.
  This guarantees that all load/stores to the OCCDR are only of
  DWORD quantities.

Ensure that the OCCDR is so mapped.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The MMC clock source is actually 24MHz, not 33MHz.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The MMC clock source is actually 24MHz, not 33MHz.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Same fix as commit c7cf72dc: when 'start' and 'end' are less than a
cacheline apart and 'start' is unaligned we are done after cleaning and
invalidating the first cacheline.

Cc: <stable@kernel.org>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When 'start' and 'end' are less than a cacheline apart and 'start' is
unaligned we are done after cleaning and invalidating the first
cacheline.  So check for (start < end) which will not walk off into
invalid address ranges when (start > end).

This issue was caught by drivers/dma/dmatest.

2.6.27 is susceptible.

Cc: <stable@kernel.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Lothar WaÃ<9f>mann <LW@KARO-electronics.de>
Cc: Lennert Buytenhek <buytenh@marvell.com>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

As a result of the ptebits changes, we ended up marking device mappings
as normal memory on ARMv7 CPUs, resulting in undesirable behaviour with
serial ports and the like.  While reviewing the section mapping table
entries, other errors in the memory type settings for devices were
detected and confirmed to prevent Xscale3 platforms booting.

Tested on:
	OMAP34xx (ARMv7),
	OMAP24xx (ARMv6),
	OMAP16xx (ARM926T, ARMv5),
	PXA311 (Xscale3),
	PXA272 (Xscale),
	PXA255 (Xscale),
	IXP42x (Xscale),
	S3C2410 (ARM920T, ARMv4T),
	ARM720T (ARMv4T)
	StrongARM-110 (ARMv4)
Acked-by: NTony Lindgren <tony@atomide.com>
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Tested-by: NMike Rapoport <mike@compulab.co.il>
Tested-by: NBen Dooks <ben-linux@fluff.org>
Tested-by: NAnders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As of 73bdf0a6, the kernel needs
to know where modules are located in the virtual address space.
On ARM, we located this region between MODULE_START and MODULE_END.
Unfortunately, everyone else calls it MODULES_VADDR and MODULES_END.
Update ARM to use the same naming, so is_vmalloc_or_module_addr()
can work properly.  Also update the comment on mm/vmalloc.c to
reflect that ARM also places modules in a separate region from the
vmalloc space.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Otherwise twl4030 gpios won't work.
Signed-off-by: NTony Lindgren <tony@atomide.com>

On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current
active interrupt number.

However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the
SPURIOUSIRQFLAG, which gets set if the interrupt sorting information
is invalid.

If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will
occasionally produce a bunch of confusing errors:

irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0
->handle_irq():  c006f23c, handle_bad_irq+0x0/0x22c
->chip(): 00000000, 0x0
->action(): 00000000

Fix this by masking out only the ACTIVEIRQ bits. Also fix a
confusing comment.
Signed-off-by: NTony Lindgren <tony@atomide.com>

debugfs_create_*() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.

Comparing to PATCH v1, because clk_debugfs_init is included in
"#if defined CONFIG_DEBUG_FS", we only need to check NULL return.
Thanks Li Zefan <lizf@cn.fujitsu.com>

debugfs_create_u8() and other function's return value's checking method are
also fixed in this patch.
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Fix these compiler warnings:

gpmc.c: In function 'gpmc_init':
gpmc.c:432: warning: 'return' with a value, in function returning void
gpmc.c:439: warning: 'return' with a value, in function returning void
Signed-off-by: NSanjeev Premi <premi@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

2.6.28-rc tightened up the ELF architecture checks on ARM.  For
non-EABI it only allows VFP if the hardware supports it.  However,
the kernel fails to also inspect the soft-float flag, so it
incorrectly rejects binaries using soft-VFP.

The fix is simple: also check that EF_ARM_SOFT_FLOAT isn't set
before rejecting VFP binaries on non-VFP hardware.
Acked-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

i2c_board_info array was filled incorrectly.
Due to circumstances, the way it is filled works.
This patch fills array properly.
Signed-off-by: NSergey Lapin <slapin@ossfans.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

mx31ads_defconfig compilation failed with

arch/arm/mach-mx3/mx31ads.c: In function 'mxc_init_imx_uart':
arch/arm/mach-mx3/mx31ads.c:102: error: 'mxc_uart_device0' undeclared (first use in this function)
arch/arm/mach-mx3/mx31ads.c:102: error: (Each undeclared identifier is reported only once
arch/arm/mach-mx3/mx31ads.c:102: error: for each function it appears in.)
make[1]: *** [arch/arm/mach-mx3/mx31ads.o] Error 1

Add missing include
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The Data register holds the value we have written to a gpio. To
get the input value we must read the Pad Status Register MX3 (or Sample
Status register in MX1/2 terms)
Signed-off-by: NDarius Augulis <augulis.darius@gmail.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The internal devices of the MX3 Processor have to be mapped
MT_DEVICE_NONSHARED devices, otherwise cache corruptions occur.
Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This patch changes the gpio_free implementations for the arm architecture.
 DaVinci is skipped on purpose to simplify the merge process for patches
switching it over to use gpiolib as per request by David Brownell.
Signed-off-by: NUwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: Andrew Victor <linux@maxim.org.za>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>