- 28 2月, 2013 40 次提交
-
-
由 Alex Bligh 提交于
Currently, the NBD device does not accept flush requests from the Linux block layer. If the NBD server opened the target with neither O_SYNC nor O_DSYNC, however, the device will be effectively backed by a writeback cache. Without issuing flushes properly, operation of the NBD device will not be safe against power losses. The NBD protocol has support for both a cache flush command and a FUA command flag; the server will also pass a flag to note its support for these features. This patch adds support for the cache flush command and flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl, and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the flag is active the block layer will send REQ_FLUSH requests, which we translate to NBD_CMD_FLUSH commands. FUA support is not included in this patch because all free software servers implement it with a full fdatasync; thus it has no advantage over supporting flush only. Because I [Paolo] cannot really benchmark it in a realistic scenario, I cannot tell if it is a good idea or not. It is also not clear if it is valid for an NBD server to support FUA but not flush. The Linux block layer gives a warning for this combination, the NBD protocol documentation says nothing about it. The patch also fixes a small problem in the handling of flags: nbd->flags must be cleared at the end of NBD_DO_IT, but the driver was not doing that. The bug manifests itself as follows. Suppose you two different client/server pairs to start the NBD device. Suppose also that the first client supports NBD_SET_FLAGS, and the first server sends NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two things. Before this patch, the second invocation of NBD_DO_IT will use a stale value of nbd->flags, and the second server will issue an error every time it receives an NBD_CMD_FLUSH command. This bug is pre-existing, but it becomes much more important after this patch; flush failures make the device pretty much unusable, unlike Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAlex Bligh <alex@alex.org.uk> Acked-by: NPaul Clements <Paul.Clements@steeleye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yuanhan Liu 提交于
Put get/get_uts() into CONFIG_PROC_SYSCTL code block as they are used only when CONFIG_PROC_SYSCTL is enabled. Signed-off-by: NYuanhan Liu <yuanhan.liu@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xi Wang 提交于
The null check of `strchr() + 1' is broken, which is always non-null, leading to OOB read. Instead, check the result of strchr(). Signed-off-by: NXi Wang <xi.wang@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ming Lei 提交于
Currently, sizeof(struct parsed_partitions) may be 64KB in 32bit arch, so it is easy to trigger page allocation failure by check_partition, especially in hotplug block device situation(such as, USB mass storage, MMC card, ...), and Felipe Balbi has observed the failure. This patch does below optimizations on the allocation of struct parsed_partitions to try to address the issue: - make parsed_partitions.parts as pointer so that the pointed memory can fit in 32KB buffer, then approximate 32KB memory can be saved - vmalloc the buffer pointed by parsed_partitions.parts because 32KB is still a bit big for kmalloc - given that many devices have the partition count limit, so only allocate disk_max_parts() partitions instead of 256 partitions always Signed-off-by: NMing Lei <ming.lei@canonical.com> Reported-by: NFelipe Balbi <balbi@ti.com> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ming Lei 提交于
It isn't necessary to read the information of partitions whose number is equal and more than state->limit since only maximum state->limit partitions will be added inside rescan_partitions(). That is also what other kind of partitions are doing. Signed-off-by: NMing Lei <ming.lei@canonical.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Jones 提交于
UEFI 2.3.1D will include a change to the spec language mandating that a GPT header must be greater than *or equal to* the size of the defined structure. While verifying that this would work on Linux, I discovered that we're not actually checking the minimum bound at all. The result of this is that when we verify the checksum, it's possible that on a malformed header (with header_size of 0), we won't actually verify any data. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: NPeter Jones <pjones@redhat.com> Acked-by: NMatt Fleming <matt.fleming@intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Philippe De Muyter 提交于
AIX formatted disks do not always have the MSDOS 55aa signature. This happens e.g. for unbootable AIX disks. Up to now, such disks were not recognized as AIX disks, because of the missing 55aa. Fix that by inverting the two tests. Let's first check for the AIX magic strings, and only if that fails check for the MSDOS magic word. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Cc: Andreas Mohr <andi@lisas.de> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Jens Axboe <axboe@kernel.dk> Cc: Olaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dae S. Kim 提交于
If the minor number is assigned dynamically, there is no need to search for misc->minor in misc_list, since misc->minor == MISC_DYNAMIC_MINOR. [akpm@linux-foundation.org: reduce scope of local `c'] Signed-off-by: NDae S. Kim <dae@velatum.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
Add try... parameters to disable pci and platform (openfirmware) device scanning for IPMI. Also add docs for all the try... parameters. Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corey Minyard 提交于
The configuration change building ipmi_si into the kernel precludes the use of a custom driver that can utilize more than one KCS interface, multiple IPMBs, and more than one BMC. This capability is important for fault-tolerant systems. Even if the kernel option ipmi_si.trydefaults=0 is specified, ipmi_si discovers and claims one of the KCS interfaces on a Stratus server. The inability to now prevent the kernel from managing this device is a regression from previous kernels. The regression breaks a capability fault-tolerant vendors have relied upon. To support both ACPI opregion access and the need to avoid activation of ipmi_si on some platforms, we've added two new kernel options, ipmi_si.tryacpi and ipmi_si.trydmi be added to prevent ipmi_si from initializing when these options are set to 0 on the kernel command line. With these options at the default value of 1, ipmi_si init proceeds according to the kernel default. Tested-by: NJim Paradis <jparadis@redhat.com> Signed-off-by: NRobert Evans <Robert.Evans@stratus.com> Signed-off-by: NJim Paradis <jparadis@redhat.com> Signed-off-by: NTony Camuso <tcamuso@redhat.com> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Given the obvious distinction between kernel and userspace supported by uapi/, it seems unnecessary to comment on that. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NCorey Minyard <cminyard@mvista.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Until recently, when an negative ID is specified, idr functions used to ignore the sign bit and proceeded with the operation with the rest of bits, which is bizarre and error-prone. The behavior recently got changed so that negative IDs are treated as invalid but we're triggering WARN_ON_ONCE() on negative IDs just in case somebody was depending on the sign bit being ignored, so that those can be detected and fixed easily. We only need this for a while. Explain why WARN_ON_ONCE()s are there and that they can be removed later. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
While idr lookup isn't a particularly heavy operation, it still is too substantial to use in hot paths without worrying about the performance implications. With recent changes, each idr_layer covers 256 slots which should be enough to cover most use cases with single idr_layer making lookup hint very attractive. This patch adds idr->hint which points to the idr_layer which allocated an ID most recently and the fast path lookup becomes if (look up target's prefix matches that of the hinted layer) return hint->ary[ID's offset in the leaf layer]; which can be inlined. idr->hint is set to the leaf node on idr_fill_slot() and cleared from free_layer(). [andriy.shevchenko@linux.intel.com: always do slow path when hint is uninitialized] Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Add a field which carries the prefix of ID the idr_layer covers. This will be used to implement lookup hint. This patch doesn't make use of the new field and doesn't introduce any behavior difference. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
With recent preloading changes, idr no longer keeps full layer cache per each idr instance (used to be ~6.5k per idr on 64bit) and the previous patch removed restriction on the bitmap size. Both now allow us to have larger layers. Increase IDR_BITS to 8 regardless of BITS_PER_LONG. Each layer is slightly larger than 2k on 64bit and 1k on 32bit and carries 256 entries. The size isn't too large, especially compared to what we used to waste on per-idr caches, and 256 entries should be able to serve most use cases with single layer. The max tree depth is 4 which is much better than the previous 6 on 64bit and 7 on 32bit. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Currently, idr->bitmap is declared as an unsigned long which restricts the number of bits an idr_layer can contain. All bitops can handle arbitrary positive integer bit number and there's no reason for this restriction. Declare idr_layer->bitmap using DECLARE_BITMAP() instead of a single unsigned long. * idr_layer->bitmap is now an array. '&' dropped from params to bitops. * Replaced "== IDR_FULL" tests with bitmap_full() and removed IDR_FULL. * Replaced find_next_bit() on ~bitmap with find_next_zero_bit(). * Replaced "bitmap = 0" with bitmap_clear(). This patch doesn't (or at least shouldn't) introduce any behavior changes. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
MAX_IDR_MASK is another weirdness in the idr interface. As idr covers whole positive integer range, it's defined as 0x7fffffff or INT_MAX. Its usage in idr_find(), idr_replace() and idr_remove() is bizarre. They basically mask off the sign bit and operate on the rest, so if the caller, by accident, passes in a negative number, the sign bit will be masked off and the remaining part will be used as if that was the input, which is worse than crashing. The constant is visible in idr.h and there are several users in the kernel. * drivers/i2c/i2c-core.c:i2c_add_numbered_adapter() Basically used to test if adap->nr is a negative number which isn't -1 and returns -EINVAL if so. idr_alloc() already has negative @start checking (w/ WARN_ON_ONCE), so this can go away. * drivers/infiniband/core/cm.c:cm_alloc_id() drivers/infiniband/hw/mlx4/cm.c:id_map_alloc() Used to wrap cyclic @start. Can be replaced with max(next, 0). Note that this type of cyclic allocation using idr is buggy. These are prone to spurious -ENOSPC failure after the first wraparound. * fs/super.c:get_anon_bdev() The ID allocated from ida is masked off before being tested whether it's inside valid range. ida allocated ID can never be a negative number and the masking is unnecessary. Update idr_*() functions to fail with -EINVAL when negative @id is specified and update other MAX_IDR_MASK users as described above. This leaves MAX_IDR_MASK without any user, remove it and relocate other MAX_IDR_* constants to lib/idr.c. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: "Marciniszyn, Mike" <mike.marciniszyn@intel.com> Cc: Jack Morgenstein <jackm@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: NWolfram Sang <wolfram@the-dreams.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Most functions in idr fail to deal with the high bits when the idr tree grows to the maximum height. * idr_get_empty_slot() stops growing idr tree once the depth reaches MAX_IDR_LEVEL - 1, which is one depth shallower than necessary to cover the whole range. The function doesn't even notice that it didn't grow the tree enough and ends up allocating the wrong ID given sufficiently high @starting_id. For example, on 64 bit, if the starting id is 0x7fffff01, idr_get_empty_slot() will grow the tree 5 layer deep, which only covers the 30 bits and then proceed to allocate as if the bit 30 wasn't specified. It ends up allocating 0x3fffff01 without the bit 30 but still returns 0x7fffff01. * __idr_remove_all() will not remove anything if the tree is fully grown. * idr_find() can't find anything if the tree is fully grown. * idr_for_each() and idr_get_next() can't iterate anything if the tree is fully grown. Fix it by introducing idr_max() which returns the maximum possible ID given the depth of tree and replacing the id limit checks in all affected places. As the idr_layer pointer array pa[] needs to be 1 larger than the maximum depth, enlarge pa[] arrays by one. While this plugs the discovered issues, the whole code base is horrible and in desparate need of rewrite. It's fragile like hell, Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NLi Zefan <lizefan@huawei.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. The new interface doesn't directly translate to the way idr_pre_get() was used around ipc_addid() as preloading disables preemption. From my cursory reading, it seems like we should be able to do all allocation from ipc_addid(), so I moved it there. Can you please check whether this would be okay? If this is wrong and ipc_addid() should be allowed to be called from non-sleepable context, I'd suggest allocating id itself in the outer functions and later install the pointer using idr_replace(). Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NSedat Dilek <sedat.dilek@gmail.com> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: NJoel Becker <jlbec@evilplan.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Note that the adhoc cyclic id allocation is buggy. If wraparound happens, the previous code with idr_get_new_above() may segfault and the converted code will trigger WARN and return -EINVAL. Even if it's fixed to wrap to zero, the code will be prone to unnecessary -ENOSPC failures after the first wraparound. We probably need to implement proper cyclic support in idr. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Error return values from recover_idr_add() mix -1 and -errno. The conversion doesn't change that but it looks iffy. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NJames Smart <james.smart@emulex.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Krishna C Gudipati <kgudipat@brocade.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
Convert to the much saner new idr interface. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NAnton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-