- 14 3月, 2011 4 次提交
-
-
由 Allan Stephens 提交于
Ensures that the "redundant link exists" field of the LINK_PROTOCOL messages sent by a link endpoint is set if and only if the sending node has at least one other working link to the peer node. Previously, the bit was set only if there were at least 2 working links to the peer node, meaning the bit was incorrectly left unset in messages sent by a non-working link endpoint when exactly one alternate working link was available. The revised code now takes the state of the link sending the message into account when deciding if an alternate link exists. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
All the other boolean like msg_set_X(m) operations don't export both a msg_set_X(a) and a msg_clear_X(m), but instead just have the single msg_set_X(m, val) variant. Make the redundant_link one consistent by having the set take a value, and delete the msg_clear_redundant_link() anomoly. This is a cosmetic change and should not change behaviour. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Paul Gortmaker 提交于
Function names like "tipc_node_has_redundant_links" are unweildy and result in long lines even for simple lines. The "has" doesn't contribute any value add, so dropping that is a slight step in the right direction. This is a cosmetic change, basic result of: for i in `grep -l tipc_node_has_ *` ; do sed -i s/tipc_node_has_/tipc_node_/ $i ; done Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Removes support for the timestamp field of TIPC's link protocol messages. This field was previously used to hold an OS-dependent timestamp value that was used to assist in debugging early versions of TIPC. The field has now been deemed unnecessary and has been removed from the latest TIPC specification. This change has no impact on the operation of TIPC since the field was set by TIPC, but never referenced. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 24 2月, 2011 8 次提交
-
-
由 Allan Stephens 提交于
Ensure that the routine that starts up processing on a newly created link endpoint takes the spinlock of the node object that owns the link, to prevent possible conflicts with processing involving other links owned by that node object. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Ensures that a link reset or activate message has a "probe" field of zero. (This field is currently unused in these messages, but this could potentially change in future versions of TIPC.) Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Enhances TIPC's unicast and broadcast link code to update the transmit queue maximum size counter in a single place, namely the routine that adds messages to the queue. This ensures that the maximum size statistic reported for unicast links is completely accurate, rather than being partially based on statistical sampling. The changes to link.h are just documenting the roles of the variables. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Allows the broadcast link to track the node that is requesting a retransmit in a new field dedicated to that purpose. This replaces the existing mechanism that (ab)uses an existing node structure linked list field to do the tracking. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Corrects print statements that use %x to print pointer values to use %p instead, so that 64-bit pointer values are displayed correctly. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Enhances TIPC link code to ignore an invalid link tolerance value contained in an incoming LINK_PROTOCOL message, rather than processing the value and potentially causing a divide-by-zero error. Also add a compile-time check that catches attempts to redefine TIPC's minimum link tolerance value in a manner that might result in the same divide-by-zero error at run-time. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Combines two distinct structures containing information about a TIPC bearer into a single structure. The structures were previously kept separate so that public information about a bearer could be made available to plug-in media types using TIPC's native API, while the remaining information was kept private for use by TIPC itself. However, now that the native API has been removed there is no longer any need for this arrangement. Since one of the structures was already embedded within the other, the change largely involves replacing instances of "publ.foo" with "foo". The changes do not otherwise alter the operation of TIPC bearers. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Merge two distinct structures containing information about a TIPC port into a single structure. The structures were previously kept separate so that public information about a port could be made available to applications using TIPC's native API, while the remaining information was kept private for use by TIPC itself. However, now that the native API has been removed there is no longer any need for this somewhat confusing arrangement. Since one of the structures was already embedded within the other, the change largely involves replacing instances of "publ.foo" with "foo". The changes do not otherwise alter the operation of TIPC ports. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 02 1月, 2011 6 次提交
-
-
由 Allan Stephens 提交于
Cleans up TIPC's source code to eliminate the presence of unnecessary use of {} around single statements. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Cleans up TIPC's source code to eliminate assigning values to variables within conditional expressions, improving code readability and reducing warnings from various code checker tools. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Cleans up TIPC's source code to eliminate deviations from generally accepted coding conventions relating to leading/trailing white space and white space around commas, braces, cases, and sizeof. These changes are purely cosmetic and do not alter the operation of TIPC in any way. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminates most link-specific debugging code in TIPC, which is now largely unnecessary. All calls to the link-specific debugging macros have been removed, as are the macros themselves; in addition, the optional allocation of print buffers to hold debugging information for each link endpoint has been removed. The ability for TIPC to print out helpful diagnostic information when link retransmit failures occur has been retained for the time being, as an aid in tracking down the cause of such failures. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminates obsolete calls to two of TIPC's main debugging macros, as well as a pair of associated debugging routines that are no longer required. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminates routines and data structures that were intended to allow TIPC to route messages to other clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2010 2 次提交
-
-
由 Allan Stephens 提交于
Removes a symbol that is not referenced anywhere by TIPC's link code. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Gets rid of #include statements that are no longer required as a result of the merging of obsolete native API header file content into other TIPC include files. Signed-off-by: NAllan Stephens <Allan.Stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2010 1 次提交
-
-
由 stephen hemminger 提交于
Do some cleanups of TIPC based on make namespacecheck 1. Don't export unused symbols 2. Eliminate dead code 3. Make functions and variables local 4. Rename buf_acquire to tipc_buf_acquire since it is used in several files Compile tested only. This make break out of tree kernel modules that depend on TIPC routines. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2010 1 次提交
-
-
由 Paul Gortmaker 提交于
Remove all instances of legacy, or as yet to be implemented code that is currently living within an #if 0 ... #endif block. In the rare instance that some of it be needed in the future, it can still be dragged out of history, but there is no need for it to sit in mainline. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2010 2 次提交
-
-
由 Allan Stephens 提交于
Ensure that TIPC does not re-establish communication with a neighboring node until it has finished updating all data structures containing information about that node to reflect the earlier loss of contact. Previously, it was possible for TIPC to perform its purge of name table entries relating to the node once contact had already been re-established, resulting in the unwanted removal of valid name table entries. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Add a check to tipc_recv_msg() to ensure it discards messages arriving on a newly disabled bearer. This is needed to deal with a race condition that can arise if the bearer is in the midst of being disabled when it receives a message. Performing the check after tipc_net_lock has been taken ensures that TIPC's bearers are in a stable state while the message is being processed. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2010 5 次提交
-
-
由 Allan Stephens 提交于
These functions have enough code in them such that they seem like sensible targets for un-inlining. Prior to doing that, this adds the tipc_ prefix to the functions, so that in the event of a panic dump or similar, the subsystem from which the functions come from is immediately clear. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Rather than live in link.c where they can only be used in that file alone, these helper routines are better served by being in link.h Relocated are the following: link_working_working link_working_unknown link_reset_unknown link_reset_reset link_blocked link_congested Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This is just a straight return of a field; there is no value in the abstraction of hiding it behind a function. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminate an argument in a print statement that has no corresponding format specification. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
Eliminate a field of the TIPC port structure that is populated, but never referenced. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2010 1 次提交
-
-
由 Frans Pop 提交于
Signed-off-by: NFrans Pop <elendil@planet.nl> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 3月, 2010 1 次提交
-
-
由 Neil Horman 提交于
Forward port commit fc477e160af086f6e30c3d4fdf5f5c000d29beb5 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Origional commit message: Allow retransmission of cloned buffers This patch fixes an issue with TIPC's message retransmission logic that prevented retransmission of clone sk_buffs. Originally intended as a means of avoiding wasted work in retransmitting messages that were still on the driver's outbound queue, it also prevented TIPC from retransmitting messages through other means -- such as the secondary bearer of the broadcast link, or another interface in a set of bonded interfaces. This fix removes existing checks for cloned sk_buffs that prevented such retransmission. Origionally-Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2010 1 次提交
-
-
由 Neil Horman 提交于
Port commit 20deb48d16fdd07ce2fdc8d03ea317362217e085 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Part of the large effort I'm trying to help with getting all the downstreamed code from windriver forward ported to the upstream tree Origional commit message Restore check to filter out inadverdently received messages This patch reimplements a check that allows TIPC to discard messages that are not intended for it. This check was present in TIPC 1.5/1.6, but was removed by accident during the development of TIPC 1.7; it has now been updated to account for new features present in TIPC 1.7 and reinserted into TIPC. The main benefit of this check is to filter out messages arriving from orphaned link endpoints, which can arise when a node exits the network and then re-enters it with a different TIPC network address (i.e. <Z.C.N> value). Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Origionally-authored-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Not including net/atm/ Compiled tested x86 allyesconfig only Added a > 80 column line or two, which I ignored. Existing checkpatch plaints willfully, cheerfully ignored. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2008 1 次提交
-
-
由 David S. Miller 提交于
Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 7月, 2008 1 次提交
-
-
由 Allan Stephens 提交于
This patch corrects many places where TIPC routines indicated successful completion by returning TIPC_OK instead of 0. (The TIPC_OK symbol has the value 0, but it should only be used in contexts that deal with the error code field of a TIPC message header.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2008 4 次提交
-
-
由 Allan Stephens 提交于
This patch eliminates the rarely-used "error code" argument when initializing a TIPC message header, since the default value of zero is the desired result in most cases; the few exceptional cases now set the error code explicitly. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch eliminates a case where TIPC's link code could try reading a field that is not present in a short message header. (The random value obtained was not being used, but the read operation could result in an invalid memory access exception in extremely rare circumstances.) Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch enhances TIPC's handler for incoming messages in two ways: - the trivial, single-use routine for processing non-sequenced messages has been merged into the main handler - the interface that received a message is now identified without having to access and/or modify the associated sk_buff Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Allan Stephens 提交于
This patch introduces a new, out-of-range value to indicate that a link endpoint does not have an existing session established with its peer, eliminating the risk that the previously used "invalid session number" value (i.e. zero) might eventually be assigned as a valid session number and cause incorrect link behavior. The patch also introduces explicit bit masking when assigning a new link session number to ensure it does not exceed 16 bits. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-