- 17 9月, 2014 3 次提交
-
-
由 Ezequiel Garcia 提交于
Just a trivial cleanup to remove the variable. Tested-by: NDarren Etheridge <detheridge@ti.com> Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ezequiel Garcia 提交于
This commit adds the missing calls to of_node_put to release the node that's currently held by the of_get_child_by_name() call in the panel info parsing code. Tested-by: NDarren Etheridge <detheridge@ti.com> Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ezequiel Garcia 提交于
The current error path calls tilcdc_unload() in case of an error to release the resources. However, this is wrong because not all resources have been allocated by the time an error occurs in tilcdc_load(). To fix it, this commit adds proper labels to bail out at the different stages in the load function, and release only the resources actually allocated. Tested-by: NDarren Etheridge <detheridge@ti.com> Tested-by: NJohannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: NEzequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 9月, 2014 5 次提交
-
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
- final bits (again) for the rotation support (Sonika Jindal) - support bl_power in the intel backlight (Jani) - vdd handling improvements from Ville - i830M fixes from Ville - piles of prep work all over to make skl enabling just plug in (Damien, Sonika) - rename DP training defines to reflect latest edp standards, this touches all drm drivers supporting DP (Sonika Jindal) - cache edids during single detect cycle to avoid re-reading it for e.g. audio, from Chris - move w/a for registers which are stored in the hw context to the context init code (Arun&Damien) - edp panel power sequencer fixes, helps chv a lot (Ville) - piles of other chv fixes all over - much more paranoid pageflip handling with stall detection and better recovery from Chris - small things all over, as usual * tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits) drm/i915: Update DRIVER_DATE to 20140905 drm/i915: Decouple the stuck pageflip on modeset drm/i915: Check for a stalled page flip after each vblank drm/i915: Introduce a for_each_plane() macro drm/i915: Rewrite ABS_DIFF() in a safer manner drm/i915: Add comments explaining the vdd on/off functions drm/i915: Move DP port disable to post_disable for pch platforms drm/i915: Enable DP port earlier drm/i915: Turn on panel power before doing aux transfers drm/i915: Be more careful when picking the initial power sequencer pipe drm/i915: Reset power sequencer pipe tracking when disp2d is off drm/i915: Track which port is using which pipe's power sequencer drm/i915: Fix edp vdd locking drm/i915: Reset the HEAD pointer for the ring after writing START drm/i915: Fix unsafe vma iteration in i915_drop_caches drm/i915: init sprites with univeral plane init function drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code drm/i915: Don't call gen8_fbc_sw_flush() on chv ...
-
ssh://people.freedesktop.org/~/linux由 Dave Airlie 提交于
Pull in first set of changes from Ben for ast on ppc. I've done a quick boot test on x86 and it still seems to boot. * 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux: drm/ast: Cleanup analog init code path drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx() drm/ast: POST chip at probe time if VGA not enabled drm/ast: Try to use MMIO registers when PIO isn't supported
-
由 Y.C. Chen 提交于
Signed-off-by: NEgbert Eich <eich@suse.com> Tested-by: NSteven You2 Liang <liangyou2@lenovo.com> Signed-off-by: NY.C. Chen <yc_chen@aspeedtech.com> v3: based on [PATCH 1/2] drm/ast: Add missing entry to dclk_table[]. Add reduced blanking modes, improve mode matching to identify these modes by thier sync polarities. [airlied: argh whitespace damage] Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This is requested to get the fixes for intel and radeon into the same tree for future development work. i915_display.c: fix missing dev_priv conflict.
-
git://anongit.freedesktop.org/git/nouveau/linux-2.6由 Dave Airlie 提交于
This is the main merge request for Nouveau 3.18, overview: - various bits of roy's gt21x clock work - various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs) - misc fan control improvements - kepler hdmi infoframe fixes - dp audio - l2 cache + cbc improvements * 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits) drm/gt214-/disp: enable dp audio drm/gt214-/kms: fix hda eld regression drm/g94-/disp: calculate some dp audio constants drm/gt214-/kms: perform hda codec setup on displayport too drm/gk104-/disp: infoframe registers moved yet again on kepler drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones drm/nva3/fb/ram: Per-partition regs drm/nouveau/fb/ram: Support strided regs drm/nv50/fb/ram: Store the number of partitions in the designated fields drm/nv50/kms: Set VBLANK time in modeset script drm/nouveau/bios: Add rammap support for version 1.0 drm/gf100-/pwr/memx: block host and fifo around reclock drm/nouveau/pwr/memx: fix command ordering around block/unblock drm/nouveau/pwr/memx: rename fb off/on to block/unblock drm/nva3/clk: Pause the GPU before reclocking drm/nouveau/gpio: rename g92 class to g94 drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia drm/gk104/fb/ram: twiddle some more bits when reclocking drm/nouveau/bios: parse another large chunk of random memory config data drm/gk104-/fb/ram: perform certain steps only when bios data differs ...
-
- 15 9月, 2014 32 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
NVIDIA appear to have tweaked the algorithm from GF110, this implements the previous algorithm for them still. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Thanks to Vincent Pelletier for pointing this out and providing a proof of concept patch on the list. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Done after discussion with Roy. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Solves blinking on reclocking memory. The value set is an underestimate, but with non-reduced vblanking this should give us plenty of time Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
More accurate as to the function of the opcodes. Not only is FB disabled, but the host is prevented from touching the GPU. An upcoming patch for Kepler will also halt PFIFO (as NVIDIA does). Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
V2: always call post correctly even if pre fails V3: move function prototype to nva3.h Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
-
由 Emil Velikov 提交于
nv92 hardware has only 16 interrupt lines, while nv94 and later has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect PDISP setup. This is a regression introduced with commit 9d0f5ec9ee0fd5dc5fc1cc2cf559286431e406e3 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon May 12 15:22:42 2014 +1000 gpio: split g92 class from nv50 Reported-by: estece on #nouveau Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
*when* this is done is only a rough approximation of what the binary driver does.. need to investigate more to see if it matters Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Awful, awful. But, on the GK106 I have, some upcoming patches show that this is actually necessary after all. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
All the other chipsets should be moved over to this too. It's not needed yet for the upcoming commits, so left this step as it'll conflict badly with Roy's GT21x reclocking work. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Fixes type/mask calculation being based on uninitialised data for VGA outputs. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
NVIDIA binary driver appears to, not sure if it's for a good reason, but grasping at straws for some GDDR5 reclocking issues here. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
V2: Always disable DLL reset Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Roy Spliet 提交于
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-