- 07 1月, 2010 3 次提交
-
-
由 Sekhar Nori 提交于
On da850, RTC alarm is a wakeup source from deep sleep. Mark it as a wakeup source after the rtc platform device is registered. Without this patch, the rtc-omap driver suspends the RTC during the suspend sequence and hence it cannot wakeup the SoC. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Sekhar Nori 提交于
There is nothing special to be done for interrupts which can wakeup the device from sleep on CP-INTC, but not having a set_wake implemented prevents use of common drivers which expect this function to be implemented for all wakeup interrupt sources. This patch fixes the issue encountered when using the omap-rtc driver on DA850. On DA850 the RTC alarm interrupt is used to wake up the SoC from deep sleep mode. Without this patch, the disable_irq_wake throws an unbalanced wake disable warning while resuming because the previous enable call fails for lack of set_wake implementation. Signed-off-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Vaibhav Hiremath 提交于
The I2C adapter ID is actually depends on Board and may vary, Davinci uses id=1, but in case of AM3517 id=3. So modified respective davinci board files. Signed-off-by: NVaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 06 1月, 2010 5 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix Niagara2 perf event handling. sparc64: Fix NMI programming when perf events are active. bbc_envctrl: Clean up properly if kthread_run() fails.
-
由 Rusty Russell 提交于
This reverts commit ae1b22f6. As Linus said in 982d007a: "There was something really messy about cmpxchg8b and clone CPU's, so if you enable it on other CPUs later, do it carefully." This breaks lguest for those configs, but we can fix that by emulating if we have to. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=14884Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Handle O_DIRECT when writing to a refcounted cluster.
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6由 Linus Torvalds 提交于
* 'for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6: ASoC: fixup oops in generic AC97 codec glue ASoC: fix params_rate() macro use in several codecs ASoC: fsi-ak4642: Remove ak4642_add_i2c_device
-
- 05 1月, 2010 16 次提交
-
-
由 David S. Miller 提交于
For chips like Niagara2 that have true overflow indications in the %pcr (which we don't actually need and don't use) the interrupt signal persists until the overflow bits are cleared by an explicit %pcr write. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
If perf events are active, we should not reset the %pcr to PCR_PIC_PRIV. That perf events code does the management. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 David S. Miller 提交于
In bbc_envctrl_init() we have to unlink the fan and temp instances from the lists because our caller is going to free up the 'bp' object if we return an error. We can't rely upon bbc_envctrl_cleanup() to do this work for us in this case. Reported-by: NPatrick Finnegan <pat@computer-refuge.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://decibel.fi.muni.cz/~xslaby/linux由 Linus Torvalds 提交于
* 'limits_cleanup' of git://decibel.fi.muni.cz/~xslaby/linux: resource: add helpers for fetching rlimits resource: move kernel function inside __KERNEL__ SECURITY: selinux, fix update_rlimit_cpu parameter
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: ARM: S3C: Fix NAND device registration by s3c_nand_set_platdata(). ARM: S3C24XX: touchscreen device definition ARM: mach-bast: add NAND_SCAN_SILENT_NODEV to optional devices ARM: mach-osiris: add NAND_SCAN_SILENT_NODEV to optional devices ARM: S3C24XX: touchscreen device definition
-
由 Eric W. Biederman 提交于
Holding locks over device_del -> kobject_del -> sysfs_deactivate can cause deadlocks if those same locks are grabbed in sysfs show or store methods. The I model s_active count + completion as a sleeping read/write lock. I describe to lockdep sysfs_get_active as a read_trylock, sysfs_put_active as a read_unlock, and sysfs_deactivate as a write_lock and write_unlock pair. This seems to capture the essence for purposes of finding deadlocks, and in my testing gives finds real issues and ignores non-issues. This brings us back to holding locks over kobject_del is a problem that ideally we should find a way of addressing, but at least lockdep can tell us about the problems instead of requiring developers to debug rare strange system deadlocks, that happen when sysfs files are removed while being written to. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
We kill the guest, but then we blatt random stuff. Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] Have param.h simply include <asm-generic/param.h>. [S390] qdio: convert global statistics to per-device stats
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: binfmt_elf_fdpic: Fix build breakage introduced by coredump changes. sh: update defconfigs. sh: Don't default enable PMB support. sh: Disable PMB for SH4AL-DSP CPUs. sh: Only provide a PCLK definition for legacy CPG CPUs.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: Calculate metadata requirements more accurately ext4: Fix accounting of reserved metadata blocks
-
由 Alan Cox 提交于
We wrap the smm calls and other bits with the BKL push down as a precaution but they can probably go Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
Nobody seems to want to own I2O patches so sending this one directly. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John Kacur 提交于
The BKL is in this function because of the BKL pushdown (see commit f8f2c79d) It is not needed here because the mutex_lock sonypi_device.lock provides the necessary locking. sonypi_misc_ioctl can be converted to unlocked ioctls since it relies on its own locking (the mutex sonypi_device.lock) and not the bkl Document that llseek is not needed by explictly setting it to no_llseek LKML-Reference: <alpine.LFD.2.00.0910192019420.3563@localhost.localdomain> Signed-off-by: NJohn Kacur <jkacur@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: update mailing list address nilfs2: Storage class should be before const qualifier nilfs2: trivial coding style fix
-
由 Manuel Lauss 提交于
Initialize the glue by calling snd_soc_new_ac97_codec() as is done in other ASoC AC97 codecs. Fixes an oops caused by dereferencing uninitialized members in snd_soc_new_pcms(). Run-tested on Au1250. Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 1月, 2010 12 次提交
-
-
由 Jiri Slaby 提交于
We want to be sure that compiler fetches the limit variable only once, so add helpers for fetching current and maximal resource limits which do that. Add them to sched.h (instead of resource.h) due to circular dependency sched.h->resource.h->task_struct Alternative would be to create a separate res_access.h or similar. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: James Morris <jmorris@namei.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu>
-
由 Jiri Slaby 提交于
It is an internal function. Move it inside __KERNEL__ ifdef, along with task_struct declaration. Then we get: --- /usr/include/linux/resource.h 2009-09-14 15:09:29.000000000 +0200 +++ usr/include/linux/resource.h 2010-01-04 11:30:54.000000000 +0100 @@ -3,8 +3,6 @@ #include <linux/time.h> -struct task_struct; - /* * Resource control/accounting header file for linux */ @@ -70,6 +68,5 @@ */ #include <asm/resource.h> -int getrusage(struct task_struct *p, int who, struct rusage *ru); #endif *********** include/linux/Kbuild is untouched, since unifdef is run even on headers-y nowadays. Signed-off-by: NJiri Slaby <jslaby@suse.cz>
-
由 Jiri Slaby 提交于
Don't pass current RLIMIT_RTTIME to update_rlimit_cpu() in selinux_bprm_committing_creds, since update_rlimit_cpu expects RLIMIT_CPU limit. Use proper rlim[RLIMIT_CPU].rlim_cur instead to fix that. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Acked-by: NJames Morris <jmorris@namei.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Eric Paris <eparis@parisplace.org> Cc: David Howells <dhowells@redhat.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Robert P. J. Day 提交于
Since the files have identical content, might as well simplify. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Revamp the qdio performance statistics and move them from procfs to debugfs using the seq_file interface. Since the statistics are not intended for the general user the removal of /proc/qdio_perf should not surprise anyone. The per device statistics are disabled by default, writing 1 to /<debugfs mountpoint>/qdio/<device bus ID>/statistics enables the statistics for the given device. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Daisuke HATAYAMA 提交于
Commit f6151dfe introduces build breakage, so this patch fixes it together with some printk formatting cleanup. Signed-off-by: NDaisuke HATAYAMA <d.hatayama@jp.fujitsu.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This has the adverse effect of converting many 29bit configs to 32bit mode, while this is a change that needs to be done manually for each platform. Turn it off by default in order to cut down on spurious bug reports. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
While the PMB is available on SH-4A parts, SH4AL-DSP parts exclude it altogether. As such, explicitly disable PMB support for these parts. If this changes in the future for newer subtypes, this will have to be made more fine-grained. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Ben Dooks 提交于
Merge branch 's3c24xx-updates2' into for-linus/samsung
-
由 Ben Dooks 提交于
Merge branch 'next-simtec' into for-linus/samsung
-
- 03 1月, 2010 4 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: reiserfs: Safely acquire i_mutex from xattr_rmdir reiserfs: Safely acquire i_mutex from reiserfs_for_each_xattr reiserfs: Fix journal mutex <-> inode mutex lock inversion reiserfs: Fix unwanted recursive reiserfs lock in reiserfs_unlink() reiserfs: Relax lock before open xattr dir in reiserfs_xattr_set_handle() reiserfs: Relax reiserfs lock while freeing the journal reiserfs: Fix reiserfs lock <-> i_mutex dependency inversion on xattr reiserfs: Warn on lock relax if taken recursively reiserfs: Fix reiserfs lock <-> i_xattr_sem dependency inversion reiserfs: Fix remaining in-reclaim-fs <-> reclaim-fs-on locking inversion reiserfs: Fix reiserfs lock <-> inode mutex dependency inversion reiserfs: Fix reiserfs lock and journal lock inversion dependency reiserfs: Fix possible recursive lock
-
由 Kusanagi Kouichi 提交于
It seems that Documentation/DMA-mapping.txt was supposed to be renamed to Documentation/PCI/PCI-DMA-mapping.txt. Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H Hartley Sweeten 提交于
ioremap() returns a void __iomem * not an unsigned long. Update the Documentation file to reflect this. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H Hartley Sweeten 提交于
ioremap() returns a void __iomem * not a char *. Update the documentation file to reflect this. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-